How to calibrate the Wheel/Trigger/VR knob of RC8X?
When there is any problem with the servo display of RC8X or the servo value does not return to 0, check if the trim is set. If there is no trim but the problem still exists, calibrate RC8X to solve the problem.
Enter the system menu-- Calibration
There is calibration of steering, Trigger, VR knob. And touch test.
First, calibrate the wheel, click End point. There are minimum, neutral, minimum. Follow the steps on the screen. Turn the wheel clockwise to the maximum, and then counterclockwise to the minimum. Then release the wheel to the neutral. The values here will change when you turn the wheel. When all the values here are stable, click calibration finished, the calibration of the wheel is complete.
Then calibrate the trigger in the same way. Click end point. Pull the trigger to the maximum, then push it to the minimum. And then release the trigger to the neutral. When the values here are stable, click calibration finished, the calibration of the trigger is complete.
And calibrate the VR knob in the same way. Click end point. Turn the VR knob clockwise to the maximum, and then counterclockwise to the minimum. Then turn the VR knob to the neutral, 50 is the neutral here. When all the values are stable, click calibration finished, the calibration of the VR knob is complete.
Finally, touch test.
If there is no response when you click any part of the screen. Go touch test. Click touch test. Slide your fingertips slowly on the part where there is no response. If the red dot does not follow your finger, there is some problem of your screen. If there is red dot, the problem may be caused by dry weather. Moisturize your finger and then touch the screen.
When the touch test is complete, "Click here to exit the touch test"
All the calibration is done. Click power button to return to the home page. Move the wheel , trigger or VR knob, there is no problem of servo display.
For more details of RadioLink RC8X:
www.radiolink.com/rc8x
Purchase link of RadioLink RC8X:
www.aliexpress.us/item/100500...
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.
#fpvracing #fpv#rctransmitter #radiolink #rc8x#trending#challenge
Негізгі бет Автокөліктер мен көлік құралдары Calibration & Touch Test of RadioLink RC8X
Пікірлер: 9