Best video on cv boot replacement I found by far!!
@tamaracktr6411
3 ай бұрын
Thanks Mike!!
@davidmanis3052
7 ай бұрын
Unreal. I just recieved new boots 20 min. ago in the mail. I sit down and this is the first video in my feed? Crazy…. But ya got a new sub outta the deal!!!!😂
@tamaracktr6411
7 ай бұрын
That's great!! Thanks!!
@rustykrys888
3 жыл бұрын
What was the axle nut torque?
@lukemacbride2880
3 жыл бұрын
Thanks for the help ! My local dealership is backed up 3 month so this is definitely a life saver now I can enjoy the rest of summer
@tamaracktr6411
3 жыл бұрын
No problem Luke! Thanks for watching!!
@StephenDuquette64
3 жыл бұрын
Great video guys. I wasn't sure how to separate the axle so as to get the new boot on. Appreciate the help!
@tamaracktr6411
3 жыл бұрын
Glad the video helped you out!! Thanks for watching!!!
@notcharles
Жыл бұрын
BTW - That's called a Castle Nut where I come from.
@georgeslorenzo280
2 жыл бұрын
I was completely stuck I did not know that we could separate the head from the arm and it was enough just to type a little! I didn't dare to do it, thank you thank you thank you very much for this advice. I had bought the original bellows quite rigid and it seemed impossible to me to be able to dilate it with a cone, which I did not have anyway ... luckily you were there. from Nice in France. outlander 1000xxc.
@tamaracktr6411
2 жыл бұрын
Really glad this video could help you! We are not experts by any means but we can get the job done using simple tools! Thanks for watching!!
@tardogyz
5 жыл бұрын
nice vid guys!!!! cant wait to come ride with u guys it was a blast guys !!!!but every time im out there I seem to run out of time would like to get a couple more rides in this fall keep the vids coming I watch all of them
@tamaracktr6411
5 жыл бұрын
Hey Tardog!!! We missed you at the rally this year!! Hopefully you can make it out next year!!! Is the XMR still shredding the mud? Thanks for tuning in!!!
@FrankiesChannel
5 жыл бұрын
Great job on the how too. Thanks for sharing.
@tamaracktr6411
5 жыл бұрын
Hey Frankie!!!! Thanks for watching!!
@marcogpires
5 жыл бұрын
Hi i here in Brazil thank you a Good explanation, now possible done this job my ATV.
@tamaracktr6411
5 жыл бұрын
Hi marcos!!! We are glad the video will help you fix your ATV!!! Thanks for watching!!!
@nostuckmarc8682
5 жыл бұрын
Made it look so easy. Thanks for sharing.
@tamaracktr6411
5 жыл бұрын
Hey Marc!!! Ya we've had to repair a few boots before lol! It's really not that hard. Thanks for watching!!!
@cresttoothpaste6857
4 жыл бұрын
Thank you, your a life saver
@jakefuller7597
4 жыл бұрын
You’re
@nombr
3 жыл бұрын
Good video, what position does the snap ring need to be in?
@dashcam5398
2 жыл бұрын
what is the torque spec for the wheel bearing nut
@jamiesoutdooradventures5649
2 жыл бұрын
Whats the torque spec needed for axle nut
@WheelinWithAustin
2 жыл бұрын
Thank you for the video!
@ballsdeep120
5 жыл бұрын
Excellent video Sir.
@tamaracktr6411
5 жыл бұрын
Thanks for watching Ross!!
@gerardomanuelgomez8635
11 ай бұрын
Great video. Thanks
@mbg238
5 жыл бұрын
Fun and interesting.Thanks.
@tamaracktr6411
5 жыл бұрын
Hey mbg!! Thanks for watching!!!
@billy7805
Жыл бұрын
I wish i could have rebooted mine but it was making all sorts of noise so i replaced the axle
@StockyBaldman
3 жыл бұрын
Great vid thanks
@tamaracktr6411
3 жыл бұрын
Thanks for watching!!
@dirty_worm_850
4 жыл бұрын
Great video! I have a 2019 XmR and I need to replace the outer boot on the right side rear.... Would the process be the same as you did for your Wheeler?
@tamaracktr6411
4 жыл бұрын
Yes but you will also have to take the brake caliper off. Not hard just a couple bolts.
@dirty_worm_850
4 жыл бұрын
@@tamaracktr6411 thanks for the reply!
@mariyalavrishin5584
2 жыл бұрын
Would this work if my axle is constantly ticking or clicking noise every time the wheel makes a circle would this fix it without buying the whole new axil???
@tamaracktr6411
2 жыл бұрын
It sounds like your axle will need to be replaced.
@quaddingsous
5 жыл бұрын
We just use zip-ties on the Hondas - LMAO! Good video! Thanx for sharin'! I think I'll have to get one of those clamp tools and start doing my own boot repairs (so they're done properly - lol).
@tamaracktr6411
5 жыл бұрын
Zip-ties!!! Lol!!! I heard you had another boot slip off. Once you've done a few boots its really not that hard to fix. I definitely recommend getting a good clamp tool. Thanks for watching Q!!
@erniepelley9554
5 жыл бұрын
What is the name for the clamp tool used and the those clamps?
@ivangranados8107
4 жыл бұрын
Where did you buy your parts ? What were they called ?
@tamaracktr6411
4 жыл бұрын
Hey Ivan! They are called CV Boot Kits. We order them from Recreation Supply in Saskatoon Canada. Thanks for watching!!!
@jessecrite6765
Жыл бұрын
What kind of Banding tool do you use for the boot
@tamaracktr6411
Жыл бұрын
CV Boot Banding Tool from Kimpex
@canamcrazyman9301
5 жыл бұрын
How long did it take you
@tamaracktr6411
5 жыл бұрын
I would say about 1 hour but we've done a few before this one. If its your first time i would say about 2 hours max.
@ctttr1323
5 жыл бұрын
Great job ...... hope i don't have to do that any time soon... knock on wood.
@tamaracktr6411
5 жыл бұрын
Ya it's really not that hard to do, but like any other repair a guy would rather not have to!
@notcharles
Жыл бұрын
Thank you, Goof Video
@pellerselsjd
5 жыл бұрын
What where you cleaning the grease outta the knuckle with? I want one!
@tamaracktr6411
5 жыл бұрын
Hey Josh! We just use brake clean to wash the joint out. The sprayer can be purchased at any auto parts store. Thanks for watching!!
@pellerselsjd
5 жыл бұрын
Yeah... brake cleaner is all I use to clean em out too but I have never seen such an awesome little apparatus! Is it cheaper then buying a can of brake cleaner?
@tamaracktr6411
5 жыл бұрын
@@pellerselsjd i would say it would only be cheaper if you used a lot of break clean, like on a daily basis. Once you buy the sprayer you'll need to buy a bulk pail of break clean which can cost over 80 bucks.
@maximedupont2327
5 жыл бұрын
I will definitely buy one!! In Kuujjuaq we have only sealift and planes that brings us stuff and spray can is unfortunately a dangerous good thanks that you made me discovery this nice tool. I was looking for aomething to replace break cleaner/ contact cleaner without pressurized can. You just put some air to the valve on top of your tools?
@tamaracktr6411
5 жыл бұрын
@@maximedupont2327 yup just use an air compressor to pressure it up. You can also buy different sprayers that have a built in hand pump.
@DixieNormas
5 жыл бұрын
Why does everyone skip step 1: Wash all of the mud off. Makes working things so much easier...
@tamaracktr6411
5 жыл бұрын
Yup!! Always nicer to work on a clean machine!! This quad probably doesn't get washed as much as it should lol!!!
@mybudshoteyes
5 жыл бұрын
my 2013 outlander cvs do not separate from the axle that easy.
@tamaracktr6411
5 жыл бұрын
Sometimes they can be stubborn. Try using a brass punch instead of steel, the brass punch seems to work better.
@rustykrys888
2 жыл бұрын
Mine did. 3 hits and was off. 2009 outlander XT 650
@jamesh4111
5 жыл бұрын
Hey you should clean up the shop before filming
@tamaracktr6411
5 жыл бұрын
Lol!! It's your shop so you clean it!!!
@quaddingsous
5 жыл бұрын
I was gonna say that he should clean up his quad before working on it - LOL
@tamaracktr6411
5 жыл бұрын
@@quaddingsous LOL!!! Ya the quad could've used a rinse prior to working on it!!!!
Пікірлер: 69