Been waiting for this before making my final decision! Thank you 🙏🏽
@melindagibson8606
2 жыл бұрын
OMGEEEE.. I have waited for this video for soooo long! Ok.. gotta watch! Thanks so much!
@shanebunce3589
4 ай бұрын
So cool I got one gifted from a amazing family member!! So informative!
@SolutionsBravo
5 ай бұрын
I would be happier if you talked about Acrylic and ABS type plastics too. Anyway thanks fir the video
@ComgrowOfficial
2 жыл бұрын
Thanks for making this video! Very informative and unbaised product review. Hope Comgrow Z1 can also be on your list in the future.
@mikaelhenning2
2 жыл бұрын
Very nice video. Really appreciate a channel with a solid interest in affordable lasers. It seems that this will be the year when actually usable diod lasers for cutting arrive. Looking forward to seeing more reviews, especially the Atomstack P7 and A10 which makes bold claims to both high output and small dot size.
@LutherBuilds
2 жыл бұрын
Thanks so much for providing these test files. I've been struggling to find a great resource for settings for my Two Trees 5 watt laser. I just didn't know where to start or what to expect.
@Micz82
Жыл бұрын
Lighburn has embedded generator for test files. Just go to Laser Tools->Material Test
@tinbjj
11 ай бұрын
I just ordered one for my business, we'll see how it goes 💪
@sroshazwar5616
Ай бұрын
Can you tell me how’s going? Please because i want to buy one thanks ❤
@LisaHarsh
2 жыл бұрын
So the ad came up with you in the ad. Just made me laugh
@makeorbreakshop
2 жыл бұрын
Haha!
@semanja
4 ай бұрын
Hi! Great review, thanks for sharing. I'm considering buying a Sculpfun S9, but I'm concerned about its long-term durability. Since your video was made a while ago, could you please share your experience regarding its performance over time? Has it held up well, and have you encountered any significant issues? Any insights would be greatly appreciated. Thank you!
@sroshazwar5616
Ай бұрын
Hi i want to buy this to wood cut its good or bad ? Because i don’t have enough money to change this machine if its bad if you tell me i appreciate that thanks 🙏 ❤
@2iinfinite
2 жыл бұрын
Im still using my eleksmaker laser. Noticed it uses 2 stepper motors to drive the y axis compared to this sculpfun which has the one stepper motor and the long shaft to the other side. Considering recreating this on mine and reusing that extra stepper for a z axis or possibly rotary attachment! Also 3d printing an air assist that uses a small aquarium pump!
@poco3xpro885
Жыл бұрын
I have eleks draw,can im put laser on eleksdraw ,then if can,how max watt im can upgrade to avoiding from damage that eleksdraw circuit
@drphobus
2 жыл бұрын
As a UK viewer a quick mention of both the mains power ,ie is there a 115/240 switch or a auto power supply and if its a built-in plug would be of some help. Thanks for reviews keep it up.
@mohammedwafaausd
2 жыл бұрын
may I ask for help? I work with acrylic stuff but mostly cutting if I want to buy a machine wich one in your opinion is the best for budget? thanks 🙏
@SinLimIT3S
2 жыл бұрын
I also want to know that
@Jayg19-m6h
3 ай бұрын
I cut 5mm plywood 2 passes, using air assist, with very smooth edges, and very little burn marks on the back side, top side, has no burn marks whatsoever.
@davesdigitaldomain
Жыл бұрын
can anybody tell me how long the laser diodes will last approximately when using this machine for cutting 3 mm plywood?
@ВалентинКалчев
2 жыл бұрын
Where can i see a comparison between the results of all the lasers?
@craiggeis3346
2 жыл бұрын
How does the S9 stand up to cutting Basswood for miniature buildings?
@rayvisco8545
5 ай бұрын
Excellent video! Very helpful indeed!!!!
@Glasairman
3 ай бұрын
Loogs great. Would the standard setup handle a Life Tree 40W power wise? (5mm acrylic and MDF planned)
@flowersrusflorist1520
2 жыл бұрын
love the setting board!!!!!
@harish118
6 ай бұрын
Cool video, thanks. Just a quick question if I may - between the S9, S30 Pro Max and the S30 Ultra which one would be a better pick considering that the budget is somewhat flexible? It is for some general purpose cutting ( Balsa, Plywood, Acrylic etc. ) and less of engraving. I am somewhat inclined towards the S30 Pro Max with the 20W Laser Module.
@Nehekharan
8 ай бұрын
Which honeycomb panel did you use in this video ? It seems to fit the Sulpfun S9 perfectly ?
@whocaresidontcare2116
Жыл бұрын
I liked your video. One thing I would very much like to know, what is the highest "true power" LASER head can the S9 safely handle (say DC current of 5 to 6 Amperes) and still use the existing controller and existing wiring with the exception of the external power supply due to the increased current requirements? The controller PCB is is marked as rates for 12/24 volt input.
@jesusmanuel3697
6 ай бұрын
I would like to know where can I find a replacement for the pulley-coupling piece or how it is actually called?
@lazarcata4112
7 ай бұрын
I have a sculpfun s9 450x900 extend version,3D prinding benchmark and serice engineer with Cad Cam design trainng. (Making 3D parts from sketch or technical dwg. Provided with BOM if not) and i still dont understand! Hard wood,not doing it for me! Regular wood? The fibers are going to burn and the contrast and shades are off. Recomandation! Flat soft wood,No fibres! Even! For portrait and face,use jarvis settings in Lightburn for good shades in Peisaje!
@VitiatedsHOWTO
Жыл бұрын
Now what are the other attachments that work with it
@AJ-je3pl
2 жыл бұрын
So I probably missed it but what laser do you recommend the closet to cutting and engraving in this category? I know they can’t cut threw lot but just one that can least cut and good engraving
@haidergheevala85
2 жыл бұрын
Sculpfun S9 or Atomstack X7 Pro? What to pick as a beginner?
@hughessay1372
2 жыл бұрын
Great through review--Thanks!
@jimslasercreations2221
2 жыл бұрын
Hey Brandon, hope all is well, did you say this has limit switches? Really nice to know and decideding factor in purchasing this machine, bangood has it for $299 atm and I think that's a steal especially if it has limit switches. Thanks for all the great videos.
@KatanaPL
2 жыл бұрын
S9 doesn't have limit switches, you can add your own (I bought limit switches for less than 1$ each that work very well)
@makeorbreakshop
2 жыл бұрын
Sounds like a good deal!
@jimslasercreations2221
2 жыл бұрын
@@KatanaPL thanks, that's great to know, where can I find them,? I have 2 atomstack a5 pro and pro + that I'd love to get some for them. How much trouble is it for hooking them up?
@brandoneich2412
2 жыл бұрын
I'd like to see you look at comgrow's congo z1 10w. It's pretty budget oriented( 300-350 typically)
@adeengraved5294
2 жыл бұрын
Thanks for the review. I am torn between this and the Aufero 2 with the LF laser unit. Looking to do a mixture of engraving and cutting, nothing more than 3mm thick. If you have to choose, which would you go for?
@makeorbreakshop
2 жыл бұрын
Probably Aufero since you'll have the ability to change out the laser module if need be.
@nullvoid2001
Жыл бұрын
Wish you listed the price of the machine.
@b1sti
2 жыл бұрын
Hi! I wanted to download the file, but unfortunately it doesn't work. I press download but nothing happens.
@welldonecj7
2 жыл бұрын
So I have watched a few of the videos now and seems like there are a lot of decent options, but in your experiance of using them what would be your go to for best all around quality value etc?
@grumpyshorts1056
2 жыл бұрын
in his review attitude, he seems he likes the Ortur over this one... yes?
@ДиректорЮтуба-м2ь
2 жыл бұрын
Я очень доволен своим Sculpfun S9, посмотрел очень много обзоров, самый лучший это Sculpfun) Посмотрите канал "JT Makes it"
@talatiya2242
2 жыл бұрын
What is the machine that you recommended the most? Also how you handle with plastic (considering the gas and the smell)? Thanks
@HylkeJellema
Жыл бұрын
Don't do plastics without a closed system. Or put it outside like me 🤣
@chechonal
10 ай бұрын
nice video, any link for the honeycomb?
@tinachris9431
11 ай бұрын
Would the guy be able to cut felt for embroidery (are there color limitations?)
@esiuol360girl19
2 жыл бұрын
Will this cut EVA foam?
@dejanrakic77
5 ай бұрын
can this cut out plexiglass/acrylic 5mm shapes?
@burrowsforge3538
2 жыл бұрын
Looks about average for a 5w. Any idea you will have a chance to look at the Xtool 20W?
@makeorbreakshop
2 жыл бұрын
I actually got a pre production unit in this week and have started to test it out. Hope to have a real review of it out soon!
@thecomputertech
Жыл бұрын
Hey. Downloaded the cutting test file but yet to run it. Just looking over the layers I can’t see how you’ve set the 10%,20%,30% etc for each speed. They show as 100 for each square on the layers. What am I missing ? New to lightburn so assume it’s overwritten somewhere ? Thanks!
@bluegizmo1983
Жыл бұрын
Would this machine cleanly cut 7.5 to 14 mil Mylar for stencil making?
@6creeder688
11 ай бұрын
When will you get a sculpfun icube 5 watt I think I need one but I’m waiting on a review from someone
@deedd4401
Жыл бұрын
i found this for 200 on sale .. woudl you say it's a good deal ? really worried about that air though
@-______-______-
10 ай бұрын
How easy is it to upgrade the laser?
@essamibrahim9136
2 жыл бұрын
I am looking for Cutting and engraving test file for Sculpfun S9 Laser 90 W
@ehboym1
2 жыл бұрын
thank you for this review. Do you think it will be possible to expand the machine to 140cm by changing the frame and belt ? Is there a limit to the size other than the physical size of the frame ?
@DanialADHOfficial
Жыл бұрын
yes it is
@TheMartynneil
Жыл бұрын
How would this do a cutting inch thick foam? I want to make inserts for some toolboxes to lay tools out neatly and have thought about using something like this to do it
@Chugoooo
2 жыл бұрын
how about the laser dot size of xTool D1? are ou waiting for the 20W module for that?
@makeorbreakshop
2 жыл бұрын
I need to test it, when I was doing the review it didn’t support Lightburn but I’m working on a big comparison video that will break them all down!
@ClownWhisper
2 жыл бұрын
Maybe you can help me I need to be able to cut phenolic plastics or at least three 8th inch Baltic Birch plywood. What machine should I look at I'm sure you're gonna say CO2 but I don't know any of the companies what would you look at to buy?. The lowest I'm willing to go is quarter inch and I could laminate to hit my sickness desired
@peterwong5497
2 жыл бұрын
How small the character this machine can engrave? Can it engrave 9pt characters?
@kevinsheren2407
2 жыл бұрын
I need the link for your rest pattern please. Thank you in advance.
@kiritokun7142
2 жыл бұрын
Bro I want to buy this machine but got a question! Is is possible to run it without the laser? I want to use it for ''another'' project. I want to move this thing to certain location with my own code is that possible? Please help me answer this question.
@Z-add
2 жыл бұрын
Do you have experience with opt laser heads?
@Sheiisashley
Жыл бұрын
Can I engrave tumblers with this engraver?
@juanantoniopalacios1248
Жыл бұрын
Disculpa con ella puedo hacer invitaciones con cartulina de 235 g
@Greatgadgetsgear
Жыл бұрын
Hoping you can help. Only have budget for 5w engraver and can’t figure out my best option out of these 3 units to be able to add accessories or upgrade later: atomstack a5 m50 pro, x tool d1 pro or sculpting s9 for my woodworking business. Watched too many reviews and I’m overloaded at this point, any help you can provide would be greatly appreciated. Thank you!
@ammamar4269
2 жыл бұрын
Is this powerful enough to cut thin nylon mesh?
@adrianwilliams-ug2lf
10 ай бұрын
can the 5.5 w cut through 5mm plywood?
@Annie-jr1rd
2 жыл бұрын
Can it cut through acrylic?
@allkindsofscience2538
2 жыл бұрын
can you remove rust with one of these?
@aquilgoodman
2 жыл бұрын
I have the Sculpfun S9 and I downloaded and printed the test file but when I print it starts printing very dark box and not a regular line as you showed. I sent you a email with picture of the print
@kosuken
Жыл бұрын
S9 or a5 pro?
@georgefrench2634
9 ай бұрын
Why does it say its 90 watts
@harryhayes2412
2 жыл бұрын
Hi... Great video - Thank You!.. I want to cut .5mm stainless steel, 1/4 birch ply, and acrylic - will this machine do this please?..
@ДиректорЮтуба-м2ь
2 жыл бұрын
Нержавеющую сталь он не сможет резать.
@josemanuel4233
2 жыл бұрын
Does anyone know if it’s possible to engrave 3d printed parts on filaments like ABS or PETG?
@housemancreationsco
2 жыл бұрын
Dude! I've been hoping and waiting for you to do the s9! Torn between this one and the atomstack
@housemancreationsco
2 жыл бұрын
Yep, that pretty much made that decision lol. Thanks for your awesome, reviews.
@banja9172
2 жыл бұрын
@@housemancreationsco Hi, can't se the comment/answer you're replying to. What was it? I'm in the same conundrum...
@housemancreationsco
2 жыл бұрын
@@banja9172 just a comment on his review. I actually have a ortur lm2 and I got the 10 watt laser tree with the stock air assist. Waaaay better than the 5.5 watt ortur I had. When he put this up I was looking at those two as replacement laser modules.
@banja9172
2 жыл бұрын
@@housemancreationsco thanks!!
@housemancreationsco
2 жыл бұрын
@@banja9172 not a problem
@aboyousef98
2 жыл бұрын
I am still looking for a machine that is very accurate and of high quality for cutting and engraving small and complex works I want to use it for cutting and engraving graphics of small size and with many details Please what do you recommend me between xTool D1 or any version of these companies Atomstack, SCULPFUN, Ortur and NEJE The truth is that I Confused and hesitant between these machines, I have been searching for two months, and the more I searched, the more confused I became
@ДиректорЮтуба-м2ь
2 жыл бұрын
Конечно Sculpfun! Я посмотрел очень много обзоров на эту тему, самый лучший это Sculpfun. Я его купил и очень доволен 👍
@bobf3598
Жыл бұрын
I honestly don't understand why you would want to cut through thick plywood on so many passes at 100% power, not unless you have deep pockets!. Diode lasers, although they can accomplish it will burn out in no time. Monies wasted there replacing the diode lasers over time could have been used on a decent 60-100w CO2 laser which can at a lower percentage output, put up with the abuse.
@ucichannel4065
Жыл бұрын
LASERNYA BAGUS
@zachdrop
2 жыл бұрын
Could this cut .01cm aluminum? I know you said no metal. But hopefully that's thin enough? Thanks.
@makeorbreakshop
2 жыл бұрын
It won't even be able to mark metal. For actual cutting you'll need a really high power CO2 machine.
@2iinfinite
2 жыл бұрын
It would be like trying to xray with your iPhone’s flash light. Laser diode waves just bounce off metal.
@zachdrop
2 жыл бұрын
@@makeorbreakshop ok thank you for the help.
@zachdrop
2 жыл бұрын
@@2iinfinite do you have any recommendations for cutting soda cans? Thanks
@triforce1745
2 жыл бұрын
How to "ENGRAVE" in aluminium kzitem.info/news/bejne/l4d7m5h4cnp8foo
@sotm2
2 жыл бұрын
For the price of that Sculpfun I got a 40 watt CO2 that cuts much thicker material!
@jeroenvandend
2 жыл бұрын
Just got my sculptfun for 190 euro's pretty nice for that price
@GlooowTube
Жыл бұрын
Atomstack 5 pro+
@kimsaarunga989
Жыл бұрын
I WISH TO OWN THIS AND START A BUSINESS WITH IT BUT I DONT HAVE THE MONEY TO BUY IT.CAN YOU DONATE IT PLEASE?
@336mrk
Жыл бұрын
Sculpfun has a rubbish and dishonest shipping service I ordered mine on the 5th December thinking I would get my machine shipped by DHL 16th December still waiting!!! AVOID AT ALL COSTS 👎🏼
Пікірлер: 107