U got it wrong/inaccurate on the solar panel test there. The screen will show nothing(just like your screen does). You have to cover the watch with your hand for 3 seconds to stop the watch from getting any light. Then take your hand off. If the screen shows 8888, it means the solar panel is working.
@meralynparisvlogs7328
2 жыл бұрын
Beautiful watch very informative thanks for sharing
@deniztrillo
2 жыл бұрын
thank you goodchit.
@ruthdoriomortillero
2 жыл бұрын
Nice tutorial,many can benefit specially to the users of that products.
@deniztrillo
2 жыл бұрын
thank you sir.
@alainruiz
2 ай бұрын
Thank you! Super super helpful
@Processor609
11 ай бұрын
>That's so cool, i have no idea how u even figured this out or know about this haha. I have GMW B5000GD-9, i just wish u can see the level of battery in the watch and not only the app. The 3 things i THINK u can do only in the app and not the watch i think is set the backlight time like 2 or 4 second light settings, button sounds, maybe the hourly beep too. I'm not sure, you know a lot more than me.
@iyancupliz
11 ай бұрын
I've been looking for a way to activate illumination without pressing button. Thanks!
@walastikdingruth
2 жыл бұрын
Very informative, ganon pala iyon, thanks for sharing!
@deniztrillo
2 жыл бұрын
slamat kuys
@enzoyvlog
2 жыл бұрын
Astig pogi more video pa
@deniztrillo
2 жыл бұрын
slamat payat
@bim360
2 жыл бұрын
thanks bossing. very helpful.
@deniztrillo
2 жыл бұрын
😘
@bim360
2 жыл бұрын
@@deniztrillo buti napanood ko to bago ako nagpunta sa nagbebenta ng bultuhan ng gshock. walanghiya puro fake ung stocks..😂
@deniztrillo
2 жыл бұрын
Slamat at nakatulong ako kahit papaano sir!goodchit
@FromNoob2Pro
Жыл бұрын
Thanks man, learnt quite a bit!
@antoniocarlos-en1gj
Ай бұрын
Thanks for the tops👍
@GEMSofGOD_com
2 жыл бұрын
What's the watch?
@deniztrillo
2 жыл бұрын
limited edition!
@chihoc6898
Жыл бұрын
B5000pb
@KabutengBaboy
2 жыл бұрын
Hi! Thanks for this tutorial! I got a question: the 3 button test works on my ga 2200 but the module number is different than what's on the back of my watch? The module number says 5674 on the back of my watch but on the display test it says 5590. Any idea why?
@deniztrillo
2 жыл бұрын
To be honest I really don't know either same ga100 at the back of the watch is different on the module number or manual booklet guide.
@morpheusz5727
2 жыл бұрын
Same here for my gm2100b it’s showing as 5590 any ideas?
@CyclingNeko
2 жыл бұрын
My GM-S2100 module is 5663, but the LCD is showing 5590 too. People in my g shock community said the number should match with the module number if this is genuine G Shock. But I believe mine is genuine since GM-S2100 is still no fake being sell anywhere, and I also open the back case and see the movement is basically the same with the one that shown by a youtube channel who open the same GM-S2100..
@andrewjao3336
2 жыл бұрын
it works for all gshocks?
@dhruvkote5204
Жыл бұрын
I have an AW-591 and although it has the auto illumination function which works perfectly fine, thetilt sensor test does not work on my watch...Any ideas why?
@randomescu
Жыл бұрын
You should tilt your hand with the elbow at the same level as the wrist, not low, not near your waist. Hope thats the problem, not a faulty sensor...
@roadchoyfishingadventures4051
2 жыл бұрын
Hello idol good morning 🌞
@deniztrillo
2 жыл бұрын
gudmorning lods
@g-shockalkout6355
2 жыл бұрын
very well said informative goodchit😘😘😘😘😘😘😘😘😘😘😘😘
@lyncelruanto4907
2 жыл бұрын
Goodchit 👍👍👍👍👍👍👍👍🔥🔥🔥🔥🔥🔥🔥🔥
@sylvainster30
2 жыл бұрын
On my watch when the model number appears “3461” if I press the light button it lights up orange! Pretty cool watches for sure! ✌🏼😎👍🏼
@lock_
2 жыл бұрын
I have your same model (B5000D). While tilt test works perfectly, the SLR doesn’t show anything, even under direct sun light. I see your doesn’t show 8888 as well, so I’m wondering how it’s supposed to work.
@lock_
2 жыл бұрын
Update: it seems it’s the opposite. If there’s light, it doesn’t show anything. If it’s dark it shows 8888.
@techcave_anarchy
2 жыл бұрын
@@lock_ when you enter this menu and you are in bright environment, you need to cover it up couple of second, the watch will then sense the change of state from presence of light (voltage in the PV element) to absence of light, then it will display 8888 as sign that the PV is detecting change - thus the PV is working and delivering voltage to the charging IC
@user-og9ms4oj2h
2 жыл бұрын
Module number and upper number what mean
@deniztrillo
2 жыл бұрын
that is case number bro u will see on the back of the case module number indicate the case number and that is manual booklet guide
Пікірлер: 38