Special thanks to Scott and Devin from North Carolina and Tyler from Texas, thank you so much.
Happy New Year 2021 to all
PART 2 , REPAIR CATERPILLAR 943 !!
In this video I check and try to solve some malfunctions of this caterpillar 943 crawler loader. The procedure is valid for models cat 943/953/963/973 first versions. The cabin lift, positioner,
Engine Monitoring System (EMS) and other information in the video are identical/correct or almost the same for the models I mentioned.
00:00 Intro
01:44 Check flywheel
03:03 Starter motor installation
05:20 Automatic bucket positioner
08:02 Automatic bucket positioner (diagram)
13:01 Tilting cabin (24 ° position)
19:31 I check the electrical system
22:06 Check Ems panel
Disassembly and Assembly Caterpillar
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS Media Number -SENR4216-00
Tilt Cab (24° Position)
1. Open the access doors on both sides of the machine.
2. Remove the cotter pin and pin , and disconnect the direction and speed control rod from the
lever. The direction and speed control lever is on the left side of the machine.
3. On the right side of the machine, remove the cotter pins and pins , and disconnect implement
control rods from the lever.
4. Remove the cotter pins and pins , and disconnect steering control rods from the levers.
5. Remove the pin from eye , and move the jack so bolts can be removed. Remove bolts
from both sides of the cab support.
6. Move jack back into position, and install the pin in the eye of the jack.
7. Use the jack to lift the cab until the support bracket can be installed. After the support bracket is
installed, release the pressure in the jack so the support bracket holds the weight of the cab.
LINKS
Facebook: / musiusimone
Негізгі бет Автокөліктер мен көлік құралдары CATERPILLAR 943/953!! Systems Operation Testing and Adjusting. EMS SYSTEM,TILT CAB (24 °) PART. 2
Пікірлер: 25