Thanks for the video. I received my center stand kit with no directions - you've provided the solution - was installed in under an hour. Thank you!
@AIRMANBEAR
Жыл бұрын
Your video is the best so far.... plenty of light so we can see unlike some of the other videos on this subject ..
@45eno
2 жыл бұрын
Search “Honda NC750X Main Centre Stand Easy Install” exactly like that with centre spelled that way. It’s on “Nicks Episode” channel. So much better than the strength pull the spring back or the ratchet strap to the rim. It does require a bit of strength to align the stand to the holes for the shaft to get taped in but nothing like the strength required to pull the spring back with the stand installed full into position. Truly the single best way to install this.
@jerrybriardy
Жыл бұрын
Great video. I bought a new scooter and the center stand spring is not connected. I've watched several videos trying to figure out how to do this. This seems like the best solution. I hope it is a solution. I'll try it.
@awksedgreep
5 жыл бұрын
Many people who put on center stands only put on enough grease to warrant putting the stand down once a day or so. I think maybe you nailed the amount necessary to put the stand down 10k times a second.
@waltermh111
4 жыл бұрын
Lol my thought exactly. I don't think I was sparing but he made me nervous now lol
@daddydoodoo9089
3 жыл бұрын
You Can’t use too much on that application
@p.santos6644
5 жыл бұрын
Nice video, thank you for sharing 👍👍👍
@dirkmertens6926
5 жыл бұрын
Thanks. How was the helium ?
@p.santos6644
5 жыл бұрын
Hahaha
@theperson7718
3 жыл бұрын
Way to much white grease. if that drips off what's right behind it...... The rear wheel and if it drips while you're in a turn a bye, bye to you and your bike.
@MihalisHanos
5 жыл бұрын
Nice video ! You cannot imagine how easy is to put the spring first and then the axle....
@migueldiego1715
5 жыл бұрын
I liked the speed up parts, good editing. More you tubers should be that self aware about when they say things that are redundant or irrelevant.
@abod898
4 жыл бұрын
pegging spring will not make it come in swearing on spring will make it fit 😂
@garydunn3037
9 ай бұрын
Its not "Rocket Science" I fitted a Center Stand to an old 1970's GT550 without the aid of a manual. It was a lot wider than the one you fitted, and I did not need to remove any of the four pipes to install it. It was just simple mechanically logic, the only thing I had to wrestle with was the return spring, but I got there in the end.
@Scorpions2shy
4 ай бұрын
Thanks. I hope your bike has seen road time since putting on the center stand because that underside is (was) super SUPER clean.
@littlebennie3196
5 жыл бұрын
The center stand that you reference on Amazon says it's for the 700 series Honda not the 750. Is it the same Center stand for the 700 and 750? Thanks.
@timetraveler2yearsago758
3 жыл бұрын
Dont follow this. Just look up the instructions on the internet. Spring goes before shaft.
@crumblymal8479
3 жыл бұрын
Nice job I will try it on my project bike that I have to refit the center stand onto .Thanks : )
@rijkie226
3 жыл бұрын
Very nice instruction! Not too fast just good! Thank you! Greetings from Amsterdam Holland
@vstrom9586
5 ай бұрын
That was a great idea, thanks for posting
@Sedge1962
4 жыл бұрын
Yes, I can hear Micky mouse in this video! 😂😂😂😂
@RecoursCollectif
Жыл бұрын
are you sure you put enough grease on it though?
@kenbowlus2995
7 ай бұрын
I bought a Motion Pro Heavy Duty Spring Puller for $16. Mounted the stand on the bike first, then springs. The springs took about 10 seconds for the narrow one first, and then about 30 seconds for the second fat spring (it took me two pulls to get it hooked on). It's amazing what having the right tool for the job can do. 🙄
@ARCHSTANTON61
5 жыл бұрын
last time i did it i attached the spring first then put the pin in, a bit fiddly but easier...
@ALEXANDR9911
5 жыл бұрын
Спасибо за обзор. У меня закусило штифт опорный спустя 6 лет и он сместился относительно уха
@gajbapivo
5 жыл бұрын
Thanks for the video. Did you put screw glue on the spring holder?
@TheDervMan
6 жыл бұрын
Getting that spring stretched and attached is real tricky! Great video and your bike is impressively clean.
@Ladosligese
2 жыл бұрын
thats ALOT of greace , ty for the video.. please tell me your bike is brand brand new .. like havent seen the road , cause DAMN its clean under it haha
@1zanglang
Жыл бұрын
Not enough grease...
@rhino941
11 ай бұрын
Big thanks for the tip for fitting the spring. I was thinking how on earth to get this in place until i found your video👍👍 I used a thick steel wire instead of the shoestring. Now my Aprilia Tuareg 660 has a nice center stand.
@timjones4850
10 ай бұрын
Yes - thanks so much for posting this - I will have to do the same soon and your video is a tremendous help!
@simshort3089
Жыл бұрын
Very helpful thank you. The tip on using a ratchet was justbwhatnI needed.
@amrak-8401
3 жыл бұрын
I have a Honda NM4 and I was wondering if this center stand would work for it. Thank you.🙏
@funkymunky7935
5 жыл бұрын
Can you do a video on getting it onto the stand? I have the centre stand on my bike, but I'm having trouble getting it onto the stand. I tried the usual rock back and lift, but it's just too heavy
@reglewis393
5 жыл бұрын
Press down hard on foot leaver, just as it starts to lift pull back on handlebars.
@lewerim
5 жыл бұрын
One of the best motorcycle teachers on KZitem (IMO) shows how it's done... kzitem.info/news/bejne/rJeomoZpfXZhi6g
@willierollerskating8642
3 жыл бұрын
Stand on the stand with your right foot as you are standing up on it and when you are pulling up with your right hand then her weight will be minimum and she will lift up in a second. Cheers! 😉😉😉
@2tmacisback
2 жыл бұрын
Thanks for posting the install instructions. I have been trying to get a center stand for my 2007 Honda 919 for 2 years. Not an easy task. Any suggestions.
@Ladosligese
2 жыл бұрын
wont a Cb600 center do it ?
@christianehrmann5083
Жыл бұрын
tank you for your help !
@HondaDCT
3 жыл бұрын
Yeeeeap! Screw glu :)
@Jp-cc8ds
4 жыл бұрын
How are you holding the bike? i need to do this in my motorcycle and if you can tell me hold are you doing this it would be helpful.
@willierollerskating8642
3 жыл бұрын
Stand on the stand with your right foot as you are standing up on it and when you are pulling up with your right hand then her weight will be minimum and she will lift up in a second. Cheers! 😉😉😉
Пікірлер: 47