Congratulations, one of best tutorials for this bike. Bravissimo.
@FinnMikeonaBike
4 жыл бұрын
Thanks for the comment, glad you liked the video :-) 👍
@tipprich
10 ай бұрын
Just used this guide (and the manual) to install my crash guards on my 2015 NC700X. It was a great reference.
@simonbowen6653
3 жыл бұрын
Jobs like to this are one offs so it really helps when someone takes the time to explain it properly. Thank you.👍
@JakStat
3 жыл бұрын
Thank you sooo much. Did the job myself this morning and your video made it so much easier! I could have never managed to do it only with the garbage included instructions. Cheers from Italy!
@burgmanrainer
2 жыл бұрын
Thank you so much. Your Instructions are absolutely perfect!!!
@tommydacheese2185
4 жыл бұрын
I installed my engine guards yesterday . Thank you so much for the video . My 2018 has a slightly different hose clamp. Not an issue just different.
@lesliegannon165
3 жыл бұрын
The tip with the scissors works a treat, be careful with the clutch cable bracket as the finish on the engine casing scratches very easily.
@adamnowell2409
3 жыл бұрын
Amazing, thanks so much. Did it last wend and went together first time. I used a spoon to place the circular washers in place for the engine bolts and made the job super simple.
@tommydacheese2185
4 жыл бұрын
Thank you so much for the videos . I believe the NC750x is much more popular in Europe than the US. I’m in the US and aside from you and another man in the U.K. there is very little on this bike as far as videos go. I appreciate you making good videos for the rest of us. Keep them coming !
@joshuaheffernan4374
4 жыл бұрын
Premises187 has a nc700
@CB-xj4jr
4 жыл бұрын
Check "Honda NC750X Stuff" on You Tube
@CB-xj4jr
4 жыл бұрын
Also check "Wheels not Heels" from the US
@richardtart4211
Жыл бұрын
Thanks I followed your instructions which were so easy to follow job done !
@einarjakobsen5014
3 жыл бұрын
I have just installet my Givi engine guard. The video was very helpfull. Thank you!
@nikos-giorgos
10 ай бұрын
I like how your tutorial, totally missed the part about the torque wrench...
@patrickschubert3278
2 жыл бұрын
Thank you from Germany ✌🏻
@Herzankerkreuz67
4 жыл бұрын
I like the sw motech bars better. They have a connector bar in front of the motor that connects both sides and forms a cradle around the motor.
@FinnMikeonaBike
4 жыл бұрын
Hello Andree, you are right, the SW-Motech might have been better, I had some trouble finding them at the time when I ordered. Ride safe 👍
@Herzankerkreuz67
4 жыл бұрын
@@FinnMikeonaBike Thanks for your great videos about a great motorcycle. Honda has made something special with the NC bikes since they stand for something rather unusual in our times of fast consumerism and buy, use and replace.....These bikes are real tractors and do stand the test of time by being super reliable, easy to maintain and very fuel efficient. In fact I like them so much that I have two. A 2013 NC700S on which I just completed 100.000 km since I bought it new. And a 2014 NC750S that my Honda dealer offered me at a reasonable price with 4000km which has now 27000 km . The reason behind having two is I don't own a car and I like to do all maintenance myself and with two bikes I still can assure having a vehicle at my disposal all the time. Hope you enjoy your bike as much as I do. Safe rides to you too ! 😊👍🏍
@IdealBike
4 жыл бұрын
Nice video, thanks for sharing!
@romandyadyura1559
2 жыл бұрын
Thank you very much! Great video! 👍! Wish you all the best!
@trailblazeratv6306
4 жыл бұрын
Excellent video, Thinking about getting some for my NC700X
@mmmarks78
5 ай бұрын
great guide! Thank you
@FinnMikeonaBike
4 ай бұрын
Glad it was helpful!
@johnnyviegas2195
3 жыл бұрын
This video helped me a lot. Thanks 👍
@mmmasterscross7915
4 жыл бұрын
Great video review! Very interesting and informative video! Thanks so much!
@mertkucuk5667
Ай бұрын
Awasome
@spacecoasttactical
3 жыл бұрын
Ideally you should get the longer engine mount bolts from Honda. In any case, the bolts MUST be torqued to 54nm or you're going to get vibration
@ralphaxyz4854
2 жыл бұрын
Thanks for the video. How much torque for hose clamp screws on left of the bike?
@khalidaziz5991
4 жыл бұрын
Is it really worth having this engine guard I wonder, imran what protection does it offer or its benefits? I only see this as additional weight to carry on suspension and if the bike tips over, it might do more damage to engine mounts, engine or worse void manufacturers warranty or insurance
@steveh9193
9 ай бұрын
Link to get these bars please for my new to me 2016 NC750x dct
@andersp5572
4 жыл бұрын
Nice video
@adrianbizu
3 жыл бұрын
Hi there, Great tutorial, Congrats! I have one question, Do you know if the "GIVI - TN1111 - Engine Guard" will fit on the new model 2021? I know that 2021 model is different from the old one 2020 and there is nowhere to find details about this. Thanks! in advance. :)
@rosariop4693
3 жыл бұрын
Hi, where did you buy it ? Thanks.
@raygespinosa
4 жыл бұрын
Hi, I installed the same Givi engine guards on my NC. On the right side (the side where there is a hose and a clip ) while I was tightening the engine bolt, I didn’t notice that the wire next to to the hose got pinched by the bolt and the wire seems to have some parts cut. After that the NC doesn’t shift out of 1 anymore and gear indicator blinks and check engine light stays on. I was just wondering if you know what that wire is called since mine probably needs replacing.
@shendysh9289
3 жыл бұрын
Is it possible to buy a link from the net?
@jono540
4 жыл бұрын
I have the NC750s 2020 model, will the guards fit just the same? Or are there any changes?
@SvenTSchixe
3 жыл бұрын
Jon, These should fit, there is little change in this model over the last 4 years especially. Take Care
@MiguelSilva-es7dw
3 жыл бұрын
Very good sir
@owenr3251
4 жыл бұрын
Good instructional video. What size socket is it? Hopefully I'll take delivery of my '20 NC750X by July. Lastly, I've been a mechanic for over 20 years and never been instructed to use a hammer to aid in loosening a bolt from an aluminum engine block. Use a breaker bar or pipe as an extension.
@FinnMikeonaBike
4 жыл бұрын
Hello Owen, you are right, a hammer isn't the best choice, but it was all I had at the moment.
@andrewoxner2941
Жыл бұрын
No locktite?
@deltaskyhawk
Жыл бұрын
That must be the DCT 750X cuz that hose bracket has the clutch cable on the manual 750X. Not easy to remove!
@w0lle0nthem0ve2
4 жыл бұрын
Where does the NC750X have the gear shifter and the clutch lever? ;-) Nevertheless a nice detailed video. Thanks!
@simonglobalwalkaboutnet6320
4 жыл бұрын
This is the DCT (dual clutch transmission) or automatic (essentially) gearbox. On the manual it's all in the normal place you'd expect.
@dontknowagoodnick
2 жыл бұрын
Is this the same on the 2021 model??
@sharky09000
4 жыл бұрын
Nice👍, what year is your bike? & will you be changing the skid plate to a more robust metal version?
@FinnMikeonaBike
4 жыл бұрын
My bike is model 2020, and I will change the skid plate sometime soon :-)
@sharky09000
4 жыл бұрын
@@FinnMikeonaBike I have the 17 plate version & am very happy with it👍
@muhammetulukoz6246
3 жыл бұрын
Hi everyone, is this engine guard compatible with 2021 model?
@merson812
4 жыл бұрын
Is this the Givi TN1111?
@AA-69
3 жыл бұрын
Hammering tools.. No torque wrench ? No coconut for you !
@nareshpatel4464
4 жыл бұрын
I want this bike but it's not available in India 😥
@FinnMikeonaBike
4 жыл бұрын
So sad to hear that it's not available over there. Let's hope it will be soon 👍
Пікірлер: 55