Please leave any questions you have below and I will try my best to answer them. I also apologize for the bad audio and shaky camera. It is very difficult to record and show the sim at the same time. EDIT: AN UPDATE SIM TOUR THAT IS MUCH BETTER IS HERE - kzitem.info/news/bejne/1Z6Zv4ukeqKWmKQ
@jasonallen5641
3 жыл бұрын
For your screws , add washers , lightly tighten. It also adds a real aircraft rivet, look & feel.😉
@AceSimulations
3 жыл бұрын
I actually am using that trick for a few and I am planning on adding more. I am also going to create fake screws to put on the panel. When I do that I also have a bunch of decals to make it look more like a real 172P.
@brettgarner1498
3 жыл бұрын
This is awesome! Really great job here. I hope you have a lot of fun with it, you have clearly put endless hours of work into your sim. Well done.
@studioopinions5870
Жыл бұрын
I was checking out your early days of your sim. Actually, I only use just my 55 inch screen for everything, and I am simple, I just use HoneyComb Yoke $ 250 ish dollars. And I have rudder peddles (forgot the name, lol ) And Throttle quadrant like you do. Both are hooked right up to the same table holding my screen. Real enough for me, I use my mouse for everything I operate. later I may buy an Auto Pilot unit, from somewhere, maybe Amazon, not sure yet. It will go on top of my Honeycomb yoke. That's it. Oh, and I have a great Idea on how you can use a regular Yoke system, and take off the yoke Handle, but leave the pipe in, and hook up your PVC to that, make sure your yoke is Tied down good! And on the PVC Pipe going in your cockpit will hook wires going from yoke box to cockpit yoke handles, and also you can use a Tie Rod assembly to control both yokes on one Yoke box!! Nice Huh? Question: What size TV are you Using for forward View? Thanks, If you need me to draw out my Idea, then I can email you a drawing perhaps. Peace. Terry
@AceSimulations
Жыл бұрын
I actually looked at doing that however there was not enough space behind the panel for mounting the yoke. I use a 65in tv.
@pacokrikotania1523
3 жыл бұрын
Amazing home cockpit . I'm very impressed. Wow :)
@AceSimulations
3 жыл бұрын
Thank you very much!
@CarlosELugo
2 жыл бұрын
This is very Nice, super!!!! Excellent work!!!
@AceSimulations
2 жыл бұрын
Thanks! I have a newer tour here if you are interested - kzitem.info/news/bejne/1Z6Zv4ukeqKWmKQ
@zandanse
3 жыл бұрын
Ben, this is a phenomenal simulator! Great work! When you get into a real aircraft you will not require a lot of adaption.. Best wishes on your future flying! Uncle R..
@AceSimulations
3 жыл бұрын
Thank you! I am glad you like it.
@lh32186
3 жыл бұрын
Nice setup you have there, I wanted to do a set up like that but VR came out.
@NovaGeddon771
2 жыл бұрын
Very cool man! Thanks for sharing
@AceSimulations
2 жыл бұрын
No problem glad you enjoyed it!
@jameshunt3211
3 жыл бұрын
Hi there. Love the sim setup. I am doing something similar with a cessna cockpit layout and since I have now moved to FS2020, I wanted some external gauges software to run similar to yours. You mentioned that these gauges were available to download and that you tweaked the code for them to run with FS2020? Could you give me some more information about doing this and/or provide a link or some instructions to get these to work with FS2020? Keep up the amazing work. Happy simming....
@AceSimulations
3 жыл бұрын
I am actually running The Gauges Factory instruments. They are completely free and designed to work with FSX. If you run FSUIPC 7 however, you can actually get them to work with fs2020. The setup is a little challenging, so sometime in the next few weeks I will make a video explaining it. www.mycockpit.org/forums/content.php?r=340-The-Gauges-Factory If you have any other questions post it here and I will include it in the video.
@AceSimulations
3 жыл бұрын
I just finished a video that goes into detail with my instruments. kzitem.info/news/bejne/mpxpnaN8jYB2gKA
@jakew9887
3 жыл бұрын
Great job on your sim.
@AceSimulations
3 жыл бұрын
Thanks!
@skydivemike69
2 жыл бұрын
Awesome job dude!
@AceSimulations
2 жыл бұрын
Thank you!
@AMASON_AVIATION
2 жыл бұрын
Amazing!
@AceSimulations
2 жыл бұрын
Thank you!
@luxHMT
3 жыл бұрын
Great job🥰😍
@AceSimulations
3 жыл бұрын
Thank you!
@rackum44
2 жыл бұрын
This is pretty cool You know what would make it better is getting two more screens one on each side of you or I'm surprised you don't at least have track IR
@AceSimulations
2 жыл бұрын
Thank you. I actually do now have a window on the left. I am working on a video for it which should be out soon. I can't put one on the right because of structural issues with the door as well as airflow. I will definitely have the windows working as soon as mfs2020 supports it.
@odimsti
2 жыл бұрын
Thanks for sharing your experiment, you have a great cockpit. I would like to do similarité one. Could you tell us what is your tv model, what graphics card do you use, the résolution (2k, 4k..) and how choice a tv for fs2020 ? Thanks a lot for the time to Answer to me.
@AceSimulations
2 жыл бұрын
Thank you! I am actually working on a new sim tour and I will make sure that I cover that in it.
@luxHMT
3 жыл бұрын
Came here from swiss001😃😍
@plane_spotter_italy
3 жыл бұрын
Came here from Swiss 001 I would like a setup like yours because I don’t know if you remembered but I’m the second one Lodovico giuliani
@thatpilotdude5197
3 жыл бұрын
Cool Video!
@AceSimulations
3 жыл бұрын
Thank you. Glad you liked it.
@Froqqy54
Жыл бұрын
Hello! What plane do you use? I’ve been looking for one without the G1000 Thanks!
@AceSimulations
Жыл бұрын
I use the cessna 172 with old school gouges. It comes in the premium deluxe version of fs2020.
@Froqqy54
Жыл бұрын
@@AceSimulations thanks!
@DjankoDK
3 жыл бұрын
Great job. Where are the link for the flight planner scheme???
@AceSimulations
3 жыл бұрын
I use skyvector.com for flight planning. I also use flt plan go on a tablet for when I am flying. It is similar to foreflight. If you have other questions on how to use/set up I can make a video on it.
@DjankoDK
3 жыл бұрын
@@AceSimulations Thank you for the reply, but i am talking about your Custom print out that you would leave a link to... :)
@AceSimulations
3 жыл бұрын
@@DjankoDK Sorry about that. I have both this version and a newer one I created over the last few weeks. Here is the link to both ATC printouts flyaceairline.weebly.com/files.html
@davedave3631
3 жыл бұрын
Did I miss the part where you showed the linkage for the yokes?
@AceSimulations
3 жыл бұрын
You didn't. However, I am planning on making an update video as I recently installed a new throttle assembly. In that video, I will make sure to include info on the yokes.
@AceSimulations
3 жыл бұрын
I have recently created a sim update video in which I included a small portion on the linking system. kzitem.info/news/bejne/rZ5nvpxmcYCoiaw
@AceSimulations
3 жыл бұрын
You may have already seen this video but I just rebuilt the roll linkage. In it you can see exactly how the system works. kzitem.info/news/bejne/k61q4H6pa5uDZIY
Пікірлер: 48