2018 zforce 800ex installed on top in rear . 1yr later and love this thanks to seeing this video. Took out preload and what a difference in ride and still had ground clearance.
@Izuksvids
4 жыл бұрын
Just an update guys. Super happy with the lift,no problems at all have put quite a few miles on it definitely a difference. I no longer have that rub in the front top fenders I had off of jumps LOL and I was able to soften up my preload for an even better ride
@mackleroy8267
4 жыл бұрын
How are the brackets on the top of the rear shocks holding up? I worry because they are not supported like the front lower brackets are. I know you added that support bolt but that is all that keeps that bracket from wanting to spin. I’m really curious. Please advise. Thanks for the video.
@Izuksvids
4 жыл бұрын
@@mackleroy8267 Great! No problems so far at all
@BlettzaHrekleW
5 жыл бұрын
Awesome video. Will Help a lot people with questions about this.
@edfinney3931
4 жыл бұрын
I have a 2019 zforce 1000 and I had to remove 1 bolt out of the e- brake cable mount to clear the spring. So far it is working fine. I love the extra clearance and run 29 inch tires. Have about 15 inches of clearance now👍
@kenjuicekrajewski9577
4 жыл бұрын
Great video. I like that kit the best. It's what I need for my 2018
@rprovasoli
3 жыл бұрын
my 2018 rear brackets went on mine without a hitch on the bottom. It is a trail model and does not have the square tubing like that.
@deny5172
3 жыл бұрын
Thanks for putting this video together. Cheers
@bellmetalworx
5 жыл бұрын
also to note, on 60" machine if you put on the rear bottom the E-Brake cables are in the way as well.
@R.N.GPerformance
5 жыл бұрын
Awesome video man. I love my cf motos and they make for good KZitem vids.
@rogeramadon4064
2 жыл бұрын
Excellent video - Thanks for sharing! I have ordered this Razor 800 setup to install in my 2020 CFMOTO ZForce 800 Trail. I hope to see a noticeable height difference, as I am "on the fence" about going to a 3" lift or put this 2" on. I am running the stock tires and do not have plans to put on bigger tires yet, but still don't want to compromise my axles or shocks.
@fern8648
Жыл бұрын
I just put it on my 16 800ex tonight
@smww503
3 жыл бұрын
How did you get the lower shock eye to line up with the new hole in the bracket Have been fighting with mine for close to 2 hours and I finally gave up
@joshuasmonk
4 жыл бұрын
How’s the CF Moto holding up any problems with it so far? How is it in slow technical deep mud?
@hockingd4875
3 жыл бұрын
Hey could you post a link to this kit? I think i found it but not for sure
@xxZMorris25xx
2 жыл бұрын
Would the 3 inch eBay kit for 800 efi ranger kit work for IT?
@ramcummins0521
4 жыл бұрын
Just to give a heads up I just did a lift kit on a 2017 zforce and I cut the little tabs off the bottom of the brackets and when I did that it made the brackets too short so that must have changed something lift kit still work though
@Awavy1
4 жыл бұрын
I'm glad you mentioned that, as im about to install on a 15 and 20 model. I will remove a front and rear shock and test fit both before moving forward.
@jimsly1841
3 жыл бұрын
Do you feel these will work on a 800 trail? Mine is a 2021.
@joshuagomez6148
3 жыл бұрын
DOES THE WIDTH NARROW WITH THE LIFT
@miketenney2025
3 жыл бұрын
What kind of polaris kit was that
@patrickbuhat4394
4 жыл бұрын
You mentioned all is stock with the 30" tires(what kind of tires??)...but standard clutching??...no clutch upgrade??.. I have an 800 trail.. Can I use same rzr lift application?.. Tks
@Izuksvids
4 жыл бұрын
I am currently running 30" blackwaters. And on the b2 clutch setting
@903environment
3 жыл бұрын
Well this work on a 2021zforce 950 sport
@sawsurgeon
4 жыл бұрын
Hey Isaac, nice work here. I especially like to see people who can take the initiative to improve upon someone else's concept. I used to fab everything myself. When I had the time, it was fun and effective. With life being so busy anymore, I'm much more inclined to buy a kit if it's cost-effective and make alterations to their design as needed. Hey thanks for the subscription. I really enjoyed being part of The Joe Show on Sunday. Y'all make a great community. Blessings Mr. Reichard!
@Awavy1
4 жыл бұрын
11:21 Could you not clearance the a-arm easily enough? Or doenst it even matter how you install?
@Izuksvids
4 жыл бұрын
Up front? The holes on the a arm will not line up without trimming the brackets a bit.
@fern8648
Жыл бұрын
You don't break axles with the 30s
@Izuksvids
Жыл бұрын
Only broke one rear. But that was landing a jump on that tire at wot. Lol
@davekorthauer8549
2 жыл бұрын
I have a 2018 z force 1000. What kit from Polaris do I order for a 2” lift? Or do I simply order off eBay?
@fern8648
Жыл бұрын
It's this one I just installed tonight.
@thefish7159
3 жыл бұрын
Would this work on a 2020 Zforce 800ex?
@johngarrett3764
3 жыл бұрын
Yes I added mine last weekend
@johnbrundige1147
4 жыл бұрын
Any issues with the CV axles failing due to the increased angle?
@Izuksvids
4 жыл бұрын
So far zero issues. It eliminated the rub on jump landings i had up front also.
@unclebuck5957
3 жыл бұрын
going to put these on my uforce 800
@mudslinger704
2 жыл бұрын
How did it work
@unclebuck5957
2 жыл бұрын
@@mudslinger704 worked great
@mudslinger704
2 жыл бұрын
@@unclebuck5957 thanks
@Deerslayer27
4 жыл бұрын
Will this work for the trail as well?
@Izuksvids
4 жыл бұрын
I dont beleave so, but not sure if you could make it work or not
@georgetheis7538
3 жыл бұрын
Yes, I did this kit on a 2021 Zforce 500 trail. Larger ones on front lower end & smaller ones on rear top end just like here. No need to relocate brake line either. I did the extra bolts as shown here too. Hope this helps. Shock adjustments listed here. Front: Back off top collar completely Top all slow then 4 clicks fast Bottom all fast then 3 clicks slow Rear: Top 3.5" gap between each collar Bottom all slow then 2 clicks fast Also I installed 2" wheel spacers for added stability. Rides like a dream now!
@EdwardMurray06
3 жыл бұрын
@@georgetheis7538 Thanks man. I've had my 2021 500 trail for a week now and I'm going to do this as well. Appreciate the comment!
@marcelleronquille416
4 жыл бұрын
have a video of the z force with tires on it and thoughts ? what size tires ?
@Izuksvids
4 жыл бұрын
Ill try and get some video up soon. Deffinilty love the lift! More clearance, no more rubbing on landings
Пікірлер: 46