cheap is good, it gives your more freedom to innovate! thanks for your tips.
@EleanorPeterson
5 жыл бұрын
Excellent! When I started out, a receiver, 2 huge clumsy servos and a nicad pack big enough to power things for two hours weighed 14 ounces, which is 400 grams (!). No such thing as electric flight back then (because there were no batteries or motors or speed controllers. Oh, and Rx aerials were 30" long). I'm very excited at the prospect of going tiny to avoid the soon-to-be-imposed annual tax in the UK for anything above 250 grams. I'll build balsa free-flight models and convert 'em to RC. Yay! This is a very helpful video - thank you for taking the time to make and upload it. :-)
@GrandadIsAnOldMan
6 жыл бұрын
Haven't seen a video from you for a while. Great to see this one, very helpful.
@MCsCreations
6 жыл бұрын
GrandadIsAnOldMan It's the same receiver you used on your Mirage III. 😊
@GrandadIsAnOldMan
6 жыл бұрын
Similar, but I used the WL911
@MCsCreations
6 жыл бұрын
GrandadIsAnOldMan Yeah, but they're almost identical. 😊
@neonuser2345
4 жыл бұрын
Thank you floradax now I can bind it 😀
@MasboyRC
4 жыл бұрын
It's looks so simple and reduce weight of aircraft. Thanks for sharing. Appreciate it
@ivansaenz205
5 ай бұрын
Hello, thanks for the video. I purchased the micro receiver, however I cannot bind it with my flysky I6 . What can be wrong?
@MCsCreations
6 жыл бұрын
That's really nice, man. 😊 And there's the f959 receiver, that uses 2s batteries. I already have one each. 😊
@hassanjomaa6451
5 жыл бұрын
How mush thrust can i get with the f959 brushed motor ? Thanks bro
@mcemtpockets1775
2 күн бұрын
thank you!
@mssippijim
8 ай бұрын
The quality of WLToys stuff is amazing for the cost.
@aliberkozderya3112
4 жыл бұрын
Great info! Thanks for sharing. One question, have you ever tested the limits of the built in esc?
@alexherrera3918
3 жыл бұрын
Good vide , you plane should fly real fast with that 820 motor. Are you using food plate foam , winglooks shiny. I am building one using v911. Thanks for sharing!!
@JeffriRanger
5 жыл бұрын
I want it 😋
@chinnenhon99571
Жыл бұрын
Thanks for your very useful information sir, l have been looking for this little item for months. Built my stick rc plane but still not able to takeoff. Hope this item will help me. Once again thank you.
@revtech2917
3 жыл бұрын
Do they make a brushless version?
@TechGrowth
3 жыл бұрын
can we do this same thing , but using f949s receiver.
@jimpruett4005
3 жыл бұрын
will it work with a brushless motor such as a1811-3800 kv
@familienkonto1039
4 жыл бұрын
Nice Video. But how are These Things named on ebay?
@GKCcisco
2 жыл бұрын
One of the digital servos on the WL toys pcb melted and died. How do I wire a lead for an external servo, from the pin out at the dead servo? I can’t find where the signal wire should be soldered
@kevinm4225
5 жыл бұрын
thanks for the video. do you know if these work with the lp5dsm spektrum transmitter?
@leemiles3995
2 жыл бұрын
No, because spektrum runs on a different protocol to this
@graviyadav8572
3 жыл бұрын
I am using ct6b transmitter it conected with this wltoys reciver both servos working with transmitter but throttle not working . please tell me it's a connecting problem or any other.
@peter-hl5zq
5 жыл бұрын
If i want to use with two motor How can i do that?
@jimpruett4005
3 жыл бұрын
san these receivers be used with 2 s battery
@mahirwrobleski2797
3 жыл бұрын
Hi, well I have the 2.4GHz Spektrum DSM2/DSMX transmiter would it work with this 949
@leemiles3995
2 жыл бұрын
No, because dsmx and dsm2 are different to what dlysky uses
@GutsyGibbon
Жыл бұрын
I can't find these anywhere. Are they still available? Thanks
@RCPlanesAndTravels
4 жыл бұрын
Bro!!!
@yeahitworks
4 жыл бұрын
Trying to find this wl f949 on eBay but I'm unable to. Care to share some link?. I'm getting more into indoor. Thanks for sharing.
Do you know what sort of connector you need for the fourth channel on the wl toys receiver ? And what sort of servo ?
@robertsimpson4693
3 жыл бұрын
Any LINK (vendor) you can provide to this device ? Thank you,
@raygholmes53
3 жыл бұрын
I have a problem the wltoys 949s will not bind with my flysky i6 transmitter I have done everything with the transmitter but my f949s flashes twice stops 2 flashes stops 2flashes stops and so on any ideas as I've run out of them thanks.
@floridax2
3 жыл бұрын
GO INTO THE TRANSMITTER SYSTEM MENU , SCROLL DOWN TO RX SET UP, ENTER AND DISABLE AFHDS 2. IT SHOULD WORK NOW.
@hassanjomaa6451
3 жыл бұрын
I have the same problem it doesn't bind at all even if i turn AFHDS off it work only with the old F949 version not with F949S hope some one find the solution thank you all
@e30kitty
2 жыл бұрын
@@hassanjomaa6451 Connect the battery to the plane, than turn your radio on while pressing bind.
@theoztreecrasher2647
2 жыл бұрын
@@hassanjomaa6451 Use a multi protocol radio. MT99XX protocol F949S sub-protocol.
@jonathanardon3784
3 жыл бұрын
Transmitter and reciever plss
@superdow
5 жыл бұрын
I received my receivers today but the battery connector does not fit my batteries (eflite 1 S batteries for eflite microplanes). Did you switch out the connector or what kind of batteries are you using?
@canisrigelm0627
3 жыл бұрын
How should we know that with this receiver , which transmitter will operate???
@leemiles3995
2 жыл бұрын
Research what protocol fly sky uses and then find a transmitter or recieiver with the same protocol
@guyroscopes6507
5 жыл бұрын
Do you use a 3.7 volt 150 mah battery?
@floridax2
5 жыл бұрын
it uses a 3.7 volt lipo battery 150 to 300 mah
@siddharth4662
5 жыл бұрын
very useful.... where can i order from?
@floridax2
5 жыл бұрын
YOU CAN BUY THEM ON EBAY, PRICE VARIES FROM $12 TO $15.
Пікірлер: 57