Got a 95 c2500, 7200gvrw, I want to sas. Some links to the sites you got some of the parts would be good.
@Keithdoesit
Жыл бұрын
Get that breather tube on your axle extended. Little filter won't do anything that low just gonna let water in.
@andyrivers9423
3 жыл бұрын
so i am getting ready to do my 98chev 2500. i am undecided between doing the coil springs with the dogde dana 44 or the leafs. is this truck smoother than the original ifs on rough gravel at high speed?
@wolfbear572
2 жыл бұрын
I would like to see the difference between the two. I assume the the leafs are rougher. I would like to do the same with mines but with coils if it makes it a bit smoother
@austinandannah5357
4 жыл бұрын
How are the 3.73 with the 37s. Top speed? Mpg?
@tow__chainz2250
4 жыл бұрын
Austin Heft It works out decent, l am going to re gear , if I go with any bigger of a tire and top speed isn’t affected from stock it still pegs out the speedo and for mpg 8-12
@kgoff6
Жыл бұрын
What is that f#ckin crack at 3:51? 🤣
@ohioshitboxoffroad2121
3 жыл бұрын
Your shackles are resting on the mounts.... Bet that thing rides great down the road
@tow__chainz2250
3 жыл бұрын
I know 😂 and it surprisingly does it’s on the spring vs free hanging it’s more stable than if it wasn’t besides who wants shackle flop and it makes for hella down travel
@Rosario360PNW
2 жыл бұрын
Nice set up. Wanting to sas my 99 burban. Looking for a deal on a Dana 60 front axle..and a gm 14 bolt ff rear. Then swapping out the 5.7 for a 5.3..cheers.
@foryouuugamingcoalition7110
4 жыл бұрын
YOU HAVE TO BUY SPICER ujoints for those gm outers to work. Do NOT buy the cheap ujoints, wont fit through the knuckle.
@lakercrazy420
3 жыл бұрын
What axle did you use? A f250? Also what year axle? Nice truck .. I'm getting ready to build my 95 tahoe.
@nothingfree3524
2 жыл бұрын
Have a 2000 sierra and thinking just get rolling chassis out of a solid ax truck and just put under .
@jaysonpack679
3 жыл бұрын
I’m building a 89 with my dad so this video helped a lot
@tow__chainz2250
3 жыл бұрын
I’m glad I could help lmk if you have any questions
@bonespur2728
3 жыл бұрын
Lol. I stayed around for the Nintendo music. sick truck.
@Nova_17_
3 жыл бұрын
About how much lift are you running with the 37’s? Any rubbing with the tires?
@joshuamaestas8353
3 жыл бұрын
Bro im have a hard time doing any of this shit is there anyway you can like list everything or contact me so I can get the list
@scottlilly4091
2 жыл бұрын
Ahhhhh the shackle though….. you got a slight issue with that shackle angle
@brandonbateson9022
4 жыл бұрын
What brand and size lift springs r u running in the front i have a very similar build but got to big of front springs
@tow__chainz2250
4 жыл бұрын
Brandon Bateson they are 4 leaf pack 84 c10 rear stock springs
@brandonbateson9022
4 жыл бұрын
@@tow__chainz2250 right on thanks man
@erikcapozzi3425
4 жыл бұрын
Can you and I chat about the steering
@tow__chainz2250
4 жыл бұрын
Erik Capozzi sure what do you need To know ?
@Highmvx
2 жыл бұрын
Badass k1500 nice work
@connorabbey7826
4 жыл бұрын
What’s your insta? Nice truck man 🔥
@tow__chainz2250
4 жыл бұрын
Connor Abbey Tow__chainz
@tow__chainz2250
4 жыл бұрын
Connor Abbey and thank you !!!
@str8burbn
4 жыл бұрын
Thanks for the info and what year of Chevy for the knuckles
@tow__chainz2250
4 жыл бұрын
84 Chevy
@collinturnage5872
3 жыл бұрын
Do you have the part # for the bastard joint used for the front shaft?
@tow__chainz2250
3 жыл бұрын
Yes I need to go dig trough my file cabinet tho
@skywalker3084
3 жыл бұрын
Your front drive shaft looks like PVC pipe like wtf
@tow__chainz2250
3 жыл бұрын
it’s not 😂
@skywalker3084
3 жыл бұрын
@@tow__chainz2250 i mean I'm sure it's not because you obviously took it mudding but the white makes it look like straight up pipe lmao
@foryouuugamingcoalition7110
4 жыл бұрын
Did you have death wobble before that panhard bar?
@tow__chainz2250
4 жыл бұрын
Never ran without one
@orionpetrie1063
4 жыл бұрын
rigidity is a word bro and that’s a sweet truck i don’t know shit about trucks but i bought a 95 z71 for my first one and i planned on doing a sas but i didn’t know i would have to use one from a ford!
@bam18333333
4 жыл бұрын
I like the mounts for the front axle where'd you get em?
@tow__chainz2250
4 жыл бұрын
Cameron Morris Sky off road design !!
@Bubblelover13
4 жыл бұрын
How high is the lift?
@Bubblelover13
4 жыл бұрын
Truck looks huge
@demented_cycles
4 жыл бұрын
Looks like the shackle hanger is resting on the shackle
@tow__chainz2250
4 жыл бұрын
Gives it hella down travel 🤣🤣 but not planed bad measurements but it doesn’t clack or anything off road a 47” spring would eliminate that but isn’t a issue to me 🤣🤣
Пікірлер: 44