Thanks that's very good to know I'll be inspecting mine
@vicosee4439
2 жыл бұрын
Opened mine up and surely it had one and it was clogged
@kylescreations4724
2 жыл бұрын
she will breathe better and get you some more power thx for watching glad i could help
@fish_R_stinky69
Жыл бұрын
I would recommend to straight pipe the engine or reduce backpressure. That improves power greatly.
@kylescreations4724
Жыл бұрын
probably need to do some rejetting to get it just right those little carbs can be a pain to dial in
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 On my ATV the carburetor does not let me adjust it.
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 I did a test and its already the correct ratio.
@IAmCookieMonsta
Жыл бұрын
Thx👍
@kylescreations4724
Жыл бұрын
No problem
@fish_R_stinky69
Жыл бұрын
The straight piping loses a tiny bit of low rpm torque but it greatly improved revving😎
@IAmCookieMonsta
Жыл бұрын
Who needs low end toruqe?
@kylescreations4724
Жыл бұрын
carb needs to be rejetted on the idle jet and the slide needle needs to be moved up
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 On my atv there is a piece of metal blocking the adjustment spot.
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 Could you comment on the quad?
@shanegrigg1984
26 күн бұрын
And a good way to suck in cool air and bend a valve
@fish_R_stinky69
Жыл бұрын
With stock exhuast my quad sounded like a quiet loser but now its a harley.
@kylescreations4724
Жыл бұрын
333
@fish_R_stinky69
Жыл бұрын
I removed the baffle and drilled holes to bypass the chambers. It still has the catalectic converter sadly.
@kylescreations4724
Жыл бұрын
333
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 I'm not satanic lol
@Martyimgay
6 ай бұрын
My 150cc go kart has that little box with tube sticking out of it from the first exhaust you were explaining but mine has a whole blown through it and no tube on it. Can I just block off the plate?
@kylescreations4724
6 ай бұрын
that is for some cali emissions stuff just block it off or remove it
@Martyimgay
6 ай бұрын
Thanks!
@fish_R_stinky69
Жыл бұрын
My ATV was barely starting up and now it idles a lot better and revs higher.
@kylescreations4724
Жыл бұрын
easier for them to breathe
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 They can't breathe at all lol
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 Did you see my vid?
@buscobeachofficial5131
Жыл бұрын
Definitely recommend gutting the muffler or straight piping.
@kylescreations4724
Жыл бұрын
I agree but we need a muffler
@buscobeachofficial5131
Жыл бұрын
@@kylescreations4724 This entire video proves why we *DON'T* need a muffler lol
@sharonmeyerring8691
5 ай бұрын
Now if u dill out the evaporator emission would it where should I cut the back half of the exhaust off and rebuild it
@kylescreations4724
5 ай бұрын
just use the first 8-10in of pipe off the engine and build your own
@gollumthedude
Жыл бұрын
The straight pipe lord! What he hears!
@kylescreations4724
Жыл бұрын
no straight pipe just patch the header and get a cheap ebay muffler
@gollumthedude
Жыл бұрын
@@kylescreations4724 Gollum no like muffler! GOLLUM GOLLUM!😝
@fish_R_stinky69
Жыл бұрын
I mean if you want a quiet ATV (who really wants that! haha) you have to plug them pretty good.
@kylescreations4724
Жыл бұрын
no one but our wives and girlfriends want a quiet exhaust
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 I don't have neither!😆
@fish_R_stinky69
Жыл бұрын
@@kylescreations4724 I don't have any wives or girlfriends (or any friends😟) so I don't have to worry about annoying anyone!
@mremoneywackerly8492
2 жыл бұрын
The exhaust
@kylescreations4724
2 жыл бұрын
yes
@willanderson257
7 ай бұрын
How much would you charge to fabricate one for me. Or where can I find one online? Thanks for the video, it’s very informative.
@kylescreations4724
6 ай бұрын
most of the after market exhaust are good and very flowing
@sharonmeyerring8691
5 ай бұрын
Does anybody have recommendations on an exhaust for one of those bikes looking just to buy one and got time to mess with it
@kylescreations4724
5 ай бұрын
lots of aftermarket stuff for around 100
@fish_R_stinky69
Жыл бұрын
Those baffles are shameful. Check out my ATV muffler on my channel.
@kylescreations4724
Жыл бұрын
will do
@ruannaude8197
Жыл бұрын
My exhaust did not have that. I now know that I'm terrible at welding.
@kylescreations4724
Жыл бұрын
not all have it but that thin metal is tough to weld dont beat yourself up
@CoyoteRacingEngine1000bhp
Жыл бұрын
If I had a quad i'd just chop off the muffler lol
@kylescreations4724
Жыл бұрын
chopping stuff is fun....
@bensdiygarage694
Жыл бұрын
this blows my mind.... There is better exhaust on my chainsaw... Thank you for sharing. :)
@kylescreations4724
Жыл бұрын
all these restrictions are cause of california. what ever comes into there port has to meet there regulations
@fish_R_stinky69
Жыл бұрын
Bro you are doing it the hard way. Just chop off the muffler and weld a pipe.
@kylescreations4724
Жыл бұрын
i use a complete new exhaust in most cases just wanted to show how restrictive they are
@mremoneywackerly8492
2 жыл бұрын
Well my is broken
@kylescreations4724
2 жыл бұрын
perfect time to fix and get some more power thx for watching
Пікірлер: 66