How to install MikroTik RouterOS in a virtual machine, such as VirtualBox. First steps and general tips. Documentation: help.mikrotik.com/docs/pages/...
Very good, I'm a mikrotik at heart, these videos here help a lot.
@SenourYT
Жыл бұрын
The most structured and detailed tutorial i ca across until now. Thank you very much!
@TheNetworkBerg
Жыл бұрын
Great video guys, I highly encourage people who want to learn networking concepts or have a sandbox to test new features or configurations to do so using VMs. I also definitely recommend using emulation software like EVE-NG or GNS3 to just help further your understanding of a network. Thanks again and hope to see more videos similar to this in the future ^^
@maigonis.elleris
Жыл бұрын
I like and recommend labbing too, but new comers need to be aware, that you cant test wireless configuration in virtual environments as there is no virtual wifi/lte interface. Technically you can lab it, but you need to create hybrid lab - virtual + physical. For example you want to test Capsman, you can setup CHR as Capsman server, but you need to have physical AP (even hap lite is fine) connected to you labbing device. (you can do it in multiple ways) You cant test real Mikrotik hardware throughput and hardware features, like switch chip, IPsec acceleration etc. Beside these two point it amazing what you can do in virtual environment, feature and scale wise. I have GNS3 on my laptop and I can take it where ever I go.
@TheNetworkBerg
Жыл бұрын
@@maigonis.elleris I totally agree, there are some things that you just need hardware for. I am very appreciative of MikroTik and how freely they make the CHR images. Bigger vendors hide their images behind customer portals and certain paywalls. The fact that MT allows you to test the software with the biggest limitations being a 1Mbps cap on the interfaces is really awesome.
@masinanyamkinda4221
Жыл бұрын
this is one of the most helpful video thanks
@semirauthsala6001
Жыл бұрын
I was setting up another new CHR VM and this video popped up. what a coincident :D
@michalmichalac5297
Жыл бұрын
There is usefull to create multiple virtual machines and enable multiple "Internal network" adapters on them, witch links this CHR's to (multihop) network. Then you can test NAT, routing protocols and other features.
@TheNetworkBerg
Жыл бұрын
True, I would also highly recommend using emulation software like EVE-NG or GNS3 to build topologies and really get engrossed with networking ^^
@Anavllama
Жыл бұрын
Glad to know you are human and computers hate you too! Excellent video that will motivate folks to try this. The only thing I would have spent more time on is your selection of bridge adapter. There were several selections available at this point in time and this choice is critical for setting up networks, and thus each selection could have been highlighted for one or two sentences, not too too much discussion but enough so the user can realize, oh for a connection to the internet I need this, to make it look like im on the same lan as my computer I need this etc etc. I also find it confusing to know exactly where one actually sits or is regarded on a network and on the PC using a virtual environment. Dont assume all MT users know this cold. For me its the missing link that nobody really explains.
@rezamehridehno
Жыл бұрын
nice and lovely.
@Supermunch2000
Жыл бұрын
Great video and I suffer the same "oh, I'll leave it blank" password dilemma, only to have to type one in anyway. 🤭🤭
@zuldjin4342
Жыл бұрын
make a video how to install in proxmox, please!
@jgamos
Жыл бұрын
kzitem.info/news/bejne/k2N8vKSjcJmXe34 CHR on Proxmox tuts
@maigonis.elleris
Жыл бұрын
There is help page for that: help.mikrotik.com/docs/display/ROS/CHR+ProxMox+installation . Please read documentation next time.
@Ramoonus
Жыл бұрын
Installation should be similar for proxmox
@shaunclarke94
Жыл бұрын
I was under the impression that you couldn't use bridge mode on a VM with a wifi adapter as the wifi protocol could only support a single MAC address when running as a client?
@gsi87
Жыл бұрын
В какой версии заработает CHR на 2 поколении HyperV?
@ukoi8564
Жыл бұрын
while setting up the network in settings, after I choose "Bridged Adapter", I can't choose the adapter of my internet connection. There's an error that says "Invalid Settings Detected". What should I do? I already restarted my laptop. But still nothing.
@Aston701
Жыл бұрын
When will you update the Amazon AWS AMI to v7 ?
@huso_cy
9 ай бұрын
I tried both RouterOS x86 and CHR, but vlan is not working. What do I need to do to solve this problem? The VLANs between the existing RB951 devices I have and the X86 do not communicate.
@wreckedzilla
Жыл бұрын
yep, those ideas I want to test are wireless related :D
@elbetuto
Жыл бұрын
hola. ya lo instale y cree un túnel eoip para acceder a una red local remota por medio de la aws. pero es muy lento. cómo libero la velocidad de Amazon? hay que pagar? dónde está la opción para hacerlo. por qué solo me navega a 1mega
@mikrotik
Жыл бұрын
next video will explain how to increase CHR speed! Subscribe and click the bell icon, we will have it tomorrow or day after
@alexjrgarcia565
Жыл бұрын
Please do a video of Mikrotik on EVE-NG installed in M1 Mac. Installation of EVE-NG on M1 is fairly easy but once I started the Mikrotik CHR inside EVE-NG, terminal just stuck up on black screen and Winbox still unable to detect neighbor mikrotiks. Please make a guide. Thank you!
@mikrotik
Жыл бұрын
We have several Eve-NG videos on our channel. Check them out.
@Ramoonus
Жыл бұрын
Why should I select other instead of Linux?
@mikrotik
Жыл бұрын
It does not matter if you select Linux or Other, the only important thing is 64bits.
@ronschneider4336
Жыл бұрын
Chr only one day license If I want use It more time
@mikrotik
Жыл бұрын
Not true! CHR has no limit on the free license
@ronschneider4336
Жыл бұрын
Thantks i Will try It for testing
@Accountnummer
Жыл бұрын
The password: mikrotik
@mikrotik
Жыл бұрын
actually it was "password"
@D9ID9I
Жыл бұрын
When you buy $5 VPS it is hard to justify to spend $95 on a license. Even $45 is an overkill. It should be something like $0.5-1 per month.
@mikrotik
Жыл бұрын
Just do like the video suggests and keep using it free (btw the 45$ price is for a lifetime license)
Пікірлер: 36