Nice video explaining clearly how much better pull-psuh method than hammering sits the bearing in place less stressfully. Thanks for sharing it.
@michelmoy5812
Жыл бұрын
Great video. Did you use something similar to remove the cam bearings? Don't suppose you have drawings you could share? Thanks Michel
@mrfid72
Жыл бұрын
i made the diameters of all the bits so i could also use them to pull out bushes.. not sure if i will ever do another but you never know. i will measure up the bushes and let you know.
@michelmoy5812
Жыл бұрын
@@mrfid72 Thank you so much that's very kind of you😁👍
@mrfid72
Жыл бұрын
@@michelmoy5812 OK, so the 3 bearings are different sizes, the smallest one i turned to 34.8mm diameter and lenght 20mm, middle was 40.8mm diameter and lenght 20mm, and the big one was 41.8mm diameter and 27.5mm lenght. this is for a 1275cc metro engine if that makes a difference, maybe best to measure your cam and replacement bearings to make sure. oh and i made the bigger bits 5 mm longer with diameters just a little smaller than the bores
@michelmoy5812
Жыл бұрын
@@mrfid72 Thank you so much. It's for a 1275 Metro engine. I really appreciate your help👍😁
@grahamwoodier5066
Жыл бұрын
I have only just found your Mini-related videos. Thanks, they are very interesting. What have you painted your block with? Was it brushed on or sprayed?
@mrfid72
Жыл бұрын
Glad you like the videos, I was beginning to think no one was watching them! so i painted the engine with a paint from www.ebay.co.uk/str/diysupplies1?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rE8DL8gDTq2&sssrc=3418065&ssuid=k0wfoXUQRs-&widget_ver=artemis&media=COPY it seems to go on very well with a paint brush and i did apply 3 coats.
Пікірлер: 8