Great to see you up and running. The trick with most cooling systems is to know that they are working correctly. If your spindle doesn't have a temperature sensor, you could attach a simple aquarium sensor or similar to the spindle so you can know that the spindle is in its normal temperature range. Another trick is to have the submersible pump actually in the coolant tank so if your tubing slips off the pump, it doesn't flood onto your workshop floor. I saw you have it in a tray which works as long as the tray is larger than the coolant volume. Cheers and happy CNC'g.
@joerharris
6 жыл бұрын
Thanks for the tips!
@moisesmancano4323
Ай бұрын
Hello, how can I find this blue reducer like yours in stores? What are its specifications? Thank you very much.
@sitgesvillaapartmentneilsc7924
4 жыл бұрын
Can I ask why you went for an open cooling circuit on your spindle rather than a simple PC/computer closed circuit system using a fan and high efficiency pc radiators? Just an idea, lot less tubes and mess and with a temperature sensor and flow meter built together with a temperature alarm would that not be better in view of your sizeable investment? Just curious, no disrespect to your system. You could add silver also to the solution as a disinfectant as well.
@forevertight
8 ай бұрын
I'm also interested in the answer.
@drpipe
6 жыл бұрын
Why so much antifreeze ? Even if you put 20% wouldn't it be more than enough ?
@sitgesvillaapartmentneilsc7924
4 жыл бұрын
Drop a piece of anti bacterial silver into the tank to keep the water sweet. cost about 5 quid on ebay, works all the time on my laser and cnc.
@bw0704
Жыл бұрын
Can you say what model spindle you're using and how much it cost? Is it 80mm diameter motor?
@williamblackwell9558
Жыл бұрын
I use an AIO cooler off of my water-cooled computer . Fan, radiator, and pump work perfectly.
@WoodomainJeremyBroun
4 жыл бұрын
Hi. the link to the Ebay water pump doesn't work. Can you say what the spec is please?
@russdog63
4 жыл бұрын
I have what looks like the exact same pump. It is a 12 volt DC 19 watt pump. It claims to move 800 L/hr with a 5M head. That is some decent specs for such a little pump. It looks like the flow was pretty good through that long length of tubing. I got mine on ebay but don't recall the vendor.
@davywavy5364
2 жыл бұрын
Could you give out the details for the pump as I am in desperate need of one. Please
@MrX-il3qo
4 жыл бұрын
Yeah but what kind of water pipe is suitable for a CNC on the tracks as will bend all the time?
@manishchauhan9495
Жыл бұрын
What coolant liquid you used for cooling ?
@The_Unobtainium
4 жыл бұрын
what do you think about this spindle? Is it worth it for DIY router?
@yasirh2004
4 жыл бұрын
Whats the size and voltage of that submarine water pump
@sonuverma2796
3 жыл бұрын
Sir which chemical mix with antifreeze
@fl3m4fisherman80
2 жыл бұрын
Help error e.co.a
@tomadams1066
5 жыл бұрын
That looks like a nice water pump. Where did you buy it? Or is it a secret? Tom Jacksonville, FL US
@tomadams1066
5 жыл бұрын
I found it below, sorry.
@DalyMalcolm
6 жыл бұрын
Hey joe, lovely setup you have there, where did you get that little water pump from? It’s looks like it has a good strong pump, I’ve found finding a decent pump quite hard. I like the idea of using antifreeze as a coolant too, I take it that won’t damage any of the parts?
@joerharris
6 жыл бұрын
Hi Malcolm, yes it seems to work ok! The pump was from ebay: rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F302532454321 took a while to arrive but seems good enough. I figured the anti freeze wouldn’t do any harm and will stop things growing I hope!
@DalyMalcolm
6 жыл бұрын
That’s great joe thanks, what about those blue pipe fittings, have you got the link for them too? Thanks again
@joerharris
6 жыл бұрын
They were from fleabay too! rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F172494423374
@AlJay0032
3 жыл бұрын
Why are you putting antifreeze in at all?
@victormaniaci2104
3 жыл бұрын
Probably lives in cold climate and doesn't want the water to freeze and break things every winter.
@JyskMaker
6 жыл бұрын
Set it up high, a wather pump have a lifting height.
@CoryMck
5 жыл бұрын
Energy spent pushing it up is conserved when it has to fall back down.
@vais1000
4 жыл бұрын
What coolant do you use?
@joeygonzo
3 жыл бұрын
anti freeze coolant
@msdesignru
6 жыл бұрын
OK
@genel.8582
6 жыл бұрын
What was the clear liquid that you poured into the tank after the antifreeze
Пікірлер: 33