TURN DOWN SOUND
Designed a mount to hold some of those small high density COB LED lights. Still not perfect, but better than no light.
I don't have a vacuum table to I chose to use a DOWN-CUT O-Flute endmill. This puts downward pressure onto the sheet to help hold it in place. In addition, I screwed down the 4 corners of the 4x8 sheet. I left 0.0085" offset from the bed to hopefully not cut all the way through the protective paper on the back side of the acrylic. Worked pretty well.
O-Flute Down-cut (amzn.to/3TQHAnN)
4.5kW spindle
12,000rpm
97in/min
0.25 DOC
0.0085" offset to the bed
Негізгі бет Ғылым және технология CNC Routing Acrylic with New Light
Пікірлер