Hey Rip, because of your videos, I am now into rebuildables. I purchased a nemesis mechanical mod, plume veil RDA, efest 35 amp 18650 battery, and 24 gauge kanthal. Thank you for putting out these videos. It gave me the confidence to get into this new world of flavor, clouds, and fun. Keep it up!
@kevinsmith6826
9 жыл бұрын
You sir are awesome! I know you very rarely reply to messages, but I hope you at least read this. I smoked 2.5 packs of cigs a day pretty much since I was 17 years old. I am now 47. It is because of your advice and steering me in the right direction that I am now tobacco free for 152 days and counting! It was the MVP battery and Nautilus tank that finally got me off cigs, and it was your reviews that steered me to them. Then I went with a Russian 91% at your advice, and loved it! And then went with a Cloupor clone of the DNA 30 for even more watts and power, although I rarely went above 10 watts...lol! And then your SquapeR video intrigued me and I managed to get an authentic, and its AWESOME!!! I don't want to sound dramatic, but you probably saved my life. Seriously. Thank you.
@nnnnopeitsmelori3073
5 жыл бұрын
Kevin Smith fantastic! Keep up the quit! Today is day 91 for me with the help of the vapors on KZitem. 😁🚭😁💨
@samuelhulin180
9 жыл бұрын
I love you enthusiasm. I was using a protank setup for like a year and finally moved up to a Kayfun RTA. Even without knowing anyone that really vapes to help, I have been blown away by the results. I am totally following your series. Thanks guy.
@Banesin
9 жыл бұрын
I would really like to see a tutorial on wicking techniques and strategies for flavor vs. vapor production! I know you can't show every single type of coil due to video length, but I've been experimenting and watching your videos and wonder where your motivation comes from and what you're looking for. Thanks again for another great video!
@zinku418
7 жыл бұрын
I'm new to building RDA's and I like how informative your tutorials are. Great work!
@mopyashford222
9 жыл бұрын
I'm glad that your going back to the basics for all the new guys coming into this. Greatly appreciate your dedication to help keep people from smoking.
@Bayliner-qw4gy
9 жыл бұрын
RiP Trippers keep doing your videos bro I've been vaping mechanical mods for about a year now thought i had it mastered but your videos are opening all new doors to the vaping community and my vaping experience thanks man keep on chuckin 😤
@NickyNunchucks69
9 жыл бұрын
Your videos are awesome! I have gotten 5 of my friends into the vapelife and whenever they want to learn how to build I send them to your channel. Thanks for everything RiP!
@maxroach89
9 жыл бұрын
Hey rip thanks so much for these tutorials. Just got my first mod and rda today and im so thankful for the help. Also just got to say my first build worked perfect and clocked in at .5 ohms.
@tombatxcore
9 жыл бұрын
Hey man I just wanted to let you know how appreciated you are. I was in a B&M shop recently and I brought up your channel and the woman clammed to have met you/know you I don't really remember but so many of these tutorials are like 97 hours long of some guy droning on with awful views and within minutes I'm bored. You're tutorials and reviews are the most informative, entertaining, and fun to watch that I have ever come across. Thank you on behalf of someone who is still relatively new to the building process (but smoke free since February WOO HOO!l). I never feel stupid or left out for not knowing what you're teaching. I'm not sure if you get paid or sponsored or anything but it is a crying shame if you don't. I recommend you to EVERYBODY I know when they first leave the dark side and come over to the wonderful worlds of clouds and coils. Thanks buddy.
@tombatxcore
9 жыл бұрын
*your Sorry I'm a grammar nazi
@letqin1
8 жыл бұрын
+tombatxcore sorry, im a grammar nazi* the way you said it means you're saying sorry for being a grammar nazi but thats not what you meant :)
@reecelawson3382
9 жыл бұрын
Hey Rip big fan of your videos. I have been Vaping for years but never had luck with building until I found your channel. Micro coils and cotton changed my life, thanks for all the great videos. -Reece
@sccertified9349
9 жыл бұрын
Thanks for this video rip! I explain to my friends and associate about 50 times a day on how to build coils. Now I can just forward this video! You da man Tipster! Stay hard my friend!
@nostalgiarules1348
9 жыл бұрын
Coil building 101 part 2 and 3 please!.Thank you. Your videos are awesome, and very helpful! -Shane
@leadzombies
9 жыл бұрын
This guy is awesome. Tons of help. Thanks mate!
@vapornation1726
9 жыл бұрын
you should go over how resistance works. (different size wire, size of coil, duel compared to single, ect)
@PainterVierax
9 жыл бұрын
It's all subjective so his tastes may not be yours. You have to test different settings. It's a compromise between flavour, vapor production and the amount of power you like.
@ForceBlade99
9 жыл бұрын
PainterVierax if you are using a regulated device like the ipv3 or sigelei 100w, power isn't an option, it's mostly then vapor and flavor production.
@PainterVierax
9 жыл бұрын
Axel AZ not absolutely true : I have an old vamo v3 modded to run with a 9V AC/DC adapter and there is a different sensation when I use it with an IMR battery than the adapter with the same wattage setting. It's odd and maybe relative to the chip but some people claims that a serial mounting of two batteries gives a different vaping experience on a regulated mod. Nevertheless, I was talking in general, including mechanical mods in the equation :)
@PainterVierax
9 жыл бұрын
Axel AZ That's nice at 50 watts but if it's not your taste of power you have to make different coil settings. :) So the difference with series is because of the chipset, booster v/s stepdown, it makes sense :)
@vapornation1726
9 жыл бұрын
taste and vapor production wasnt what i ment by that, i ment how 28g kanthal has a higher resistance then 26 and 5 wraps has less resistance then 6, safety , ect
@space_cakes
9 жыл бұрын
Almost a year without part 3
@CombatBuckee
8 жыл бұрын
+liggy man It's hard to believe that something hasn't come out yet thats as good as the VTC batteries.
@dylanewelch
8 жыл бұрын
+LeveledLariat the aspire 1800mah 40a have been out. pretty damn safe batteries. lol
@123789timothy
8 жыл бұрын
+dylan welch that's because they are a different chemistry. The downside to them is that when things go wrong they don't just vent. They are more likely to go straight to flames.
@LysergicCasserole95
8 жыл бұрын
+Timothy Lieuw Almost 2 months without a reply..
@sirtimpf3995
8 жыл бұрын
+TechSmack Almost 2 years sober..
@keithrussell2175
9 жыл бұрын
While everybody is so into sub0ohming, I need to build coils above 1.2 Ohms, potentially up to 2.0+ ohms.Love to see this video done for building higher ohm coils. Love the Riip Trippers! Neil Fallon's brother from another Mother. :-)
@michaeldellavecchia8937
9 жыл бұрын
Hey RiP just wanted to let you know that I started vaping two months ago and if it wasn't for your KZitem videos I would kinda be lost so wanted to throw you a shout out. Electrician by trade so I'm handy but still u the man and u saved me some $$$$
@InItForTheParking
9 жыл бұрын
Thought I'd hit you up before you do a wicking tut. I just figured out a great material! Untreated sterile medical 4x4 "universal sponges". They are 100% cotton and sterile and best of all are quilted for absorption of fluids. Been using them for little while now and sop up every drop and never run dry early on chain vapes. I cut about 1x1.5" piece and roll it into a rod and just slide it through. Of course the width will change with the inner diameter of your coil. BUT why am I so excited about it? I'm running an extra wide coil, twisted 28 and 10 wraps on a 5/64. Cotton was drying up in the middle and burning off. When I'd pull the cotton there would be nothing left in the middle. With the medical gauze 4x4s being so absorbent I don't get that. It is awesome and you should check it out!
@starshinemom
9 жыл бұрын
Thank you for this video. I'm just getting into building my own coils and this is very helpful.
@timsparkman5030
9 жыл бұрын
Hey Rip. I'm a Vaper myself as well as an employee at a vape shop. I had the same issues with the fact that sonys where coming off the market. So the owner of the company I work for brought in the new Efest LI-MN 35 amp 18650s and they rock dude. They definitely last longer than sonys and I've never had an issue with them so far. I'm a huge fan and love you're videos. Just thought I would let you know about those batteries and also wanted to say to keep doing what you're doing
@MrBandulete
9 жыл бұрын
Just made my first coil ever with some organic cotton, and I gotta say if it wasn't for this video I would had been very very confused, so thank you so much for making this expirience so easy, and my first coil turned out to be impressive! Im so proud of myself lol pat on my back.
@tzldzl
9 жыл бұрын
I've been watching your videos and they're pretty good, pretty educational and honest reviews. thumbs up, keep it up mate
@Kiwi_Tea
7 жыл бұрын
Very informative. I'm thinking of starting builds and this was handy.
@kyalbester2838
8 жыл бұрын
Hay Rip, I know you're busy, but I am still looking for Pt2 of this series. It's been nearly 2 years. Even Sherlock hasn't been this long a wait.
@steelmage830
9 жыл бұрын
Thanks for the tutorial help. I would have like to seen a coil build on silica wick or can you pull a silica wick thru the larger coil you built?
@theclosetvaperbelladii2598
9 жыл бұрын
Great video, thanks, I love wrapping coils.
@Jay_M_See
9 жыл бұрын
Thanks Trip. Looking forward to the next in the series. 👍😆
@kennethpurdy5094
9 жыл бұрын
Your vids are awesome man. Keep up the good work.
@NateB1976
9 жыл бұрын
Nice video for people just starting out...One of the things I use to wrap nano coils is body piercing jewelry. You can get it in any small gauge and use a straight bar with one bead off of it. Just clamp on the jewelry with some forceps for a grip, wrap your coil and press it to the other bead to make it tight. If I use a needle I usually stick it in a wine cork for safety and for gripping. Cheers, N8knox
@scubadan9918
9 жыл бұрын
Thanks for all the help
@manlikegus238
Жыл бұрын
Needed to go back to basics and watch this video!
@ICEMAN_GLX
9 жыл бұрын
Not that I needed to really watch this but I did anyway you did good at showing newer Vapers good tips. Keep doing what your doing man.
@SuperKCman_
9 жыл бұрын
Thanks for the video!! Newb here to RDA's so this will help out a lot!
@jeetsracing2012
9 жыл бұрын
Hey rip thanks for the how to video. Just built my first coil this past Saturday and she fires like a beast not getting the vapor to come out of my face like a huge cloud tho. Not sure if it's the juice I'm using 75vg/ 25pg or the way my rig is set up. Very new to the dripping game but have been vaping for a year now. I have an omega clone rda on single coil because I got the battery with the my on eBay so I'm not trying to blow it up. The mod is a ameravape manhattan mechanical mod and I love it. Any tips on what I can do to get those thunderheads you make?
@tainopr4356
6 жыл бұрын
Thanks for the video. Now I understand how to build coils for the RBA in my Silo Beast. One suggestion, stick the needle in a cork. You’ll have something to wrap against.🔥👍🏽
@curtismckee5181
8 жыл бұрын
good Vid Sir. One thing I would like to mention that WILL help with your super nano coil is to use a Pin vise to hold the needle, it not only holds the needle great (with the hollow style you can put the point of the needle inside the handle) but it also gives you the shoulder to work against . And you can get a pin vise on ebay for a lot less than $10 (just be sure you get the right size).
@FlAWD12
9 жыл бұрын
What I'd like to see is a 101 on the following: Why make macro vs micro vs nano? Does the wrap diameter effect surface area? What are pros and cons of more or less surface area or less? How does length of the coil effect the vape? The wattage needed? What is the common "proper" way to wick each type? When/why is it better to wick through the hole as opposed to around it? How much coil should be exposed? Where should your air hole point? Just some suggestions for next time... thanks Rip!
@EpicBunty
9 жыл бұрын
I've heard reports of the wrap diameter greatly affecting the flavour and wicking of the coils so if people have trouble with dry hits, cotton not wicking then they should increase the diameter "supposedly".
@uriahodell8854
9 жыл бұрын
EpicBunty wouldn't you just be strangling the wick if you built too narrow a diameter coil? Hence building a larger diameter coil for, say, a max vg juice versus what you might build for a thinner juice?
@EpicBunty
9 жыл бұрын
exactly. and if sub ohming, a larger diameter coil would also increase juice flow to the coil i would say. my juice is too pg to try it right now but after my shipment of 80% VG juices i'll confirm all of this (if i remember!)
@domhatch
6 жыл бұрын
You just blew my mind. Coils for years! Thanks dude!
@redace723--6
9 жыл бұрын
Rip...not sure if it's covered in part 2, but do you torch the kanthan before wrapping the coils??
@MikegLA310
9 жыл бұрын
Oh cool. Thanks for showing how many wraps you do.
@nickschwieger4021
9 жыл бұрын
Have you ever tried using the artist wire coil gizmo to build? That's what I use and I love it!
@geekrj
9 жыл бұрын
Nice Rip. Its very helpful for Us, noobs , who watch your videos a long time ago.
@timellis6847
9 жыл бұрын
Great job in your reviews, keep it up
@ytp4548
9 жыл бұрын
Hi, I've purchased a plumeveil after going through one of you reviews on RDAs. Would u suggest a longer coil leg or a shorter coil leg to the Positive/Negative post? Thank you. Cheers.
@CarloDimacali
9 жыл бұрын
Hey Rip, just like to know what build (Ohms) you would suggest on a Lemo running on a VTC4 powered mech mod to maximize flavor and minimize dry hits. New vaper here and I just bought a bunch of coil building stuff. Thanks. :) I'll probably be going back and forth between 50/50 vg/pg blend and 100% vg. Would I have to build different coils for each application?
@henryderuelle2659
8 жыл бұрын
Hey RiP when you going to bring out coil building 101 part 2? also when would I use the micro coil Macro ect.?
@RedemptionSupps
8 жыл бұрын
When you called attention for cloud chasers, you sounded like Ernie from Bert & Ernie. lol
@TheLilaXe
9 жыл бұрын
Can you teach something about resistances and how wrapping and different widths effects it
@nothingman22780
9 жыл бұрын
Hey Rip love these video's as I introduce a lot of my family into vaping, and then they all ask on how to build on RDA's eventually. One suggestion though on the Super Nano coils. Go to home-depot and pick yourself up a 4 or 5 dollar drill chuck or even one for a Dremil tool (just a smaller chuck really, and usually cheaper). You then can use that chuck to hold the Needle and give you leverage.
@liquidforce117
9 жыл бұрын
After straightening the kanthal do you recommend torching it when using 28g so its not so springy when? or what methods could be used when wrapping 28G? I can never get a perfect coil even after straightening the the wire.
@frankanderson7041
9 жыл бұрын
How do you know which coil size to use with your rebuilds? I'm trying to figure out how to do them before trying them.
@EvilSoundsEntertainment
9 жыл бұрын
Good video Rip!
@bzmudaifyd
9 жыл бұрын
Hey RiP. Been really loving all your videos. You should do a review on the Cloupor T8 to compare with the IPV3 and Sigeli 100W
@Nickstefanou97
9 жыл бұрын
You should do a review on the precise workhorse mod from super T. I just got it and love it. Especially for only being $70
@007nitehawk
9 жыл бұрын
What coil should I build for my first one? I just ordered a Maraxus Clone with a V tank clearomizer.
@frommetome14
9 жыл бұрын
I just built my first dual macro coil on my plume vail clone siting atop a lg 18650 3.7v 2500mAh. Any way my question is would it be safe to use a .53 Ohm coil build on a battery that rated for a minimum of .2 ohms? Also what's the range of this battery I know I can't go below .2 ohms but I don't know how high it can function safely.
@vapehard8284
9 жыл бұрын
Hey Rip..you shoud do a video on your whole vape collection ... that woild be awesome!
@darkghost549
9 жыл бұрын
You should have made a part about why people would use a that kind of coil like why someone would use a super nano or a macro and the pros and cons of using that set up
@XxXFandom4
9 жыл бұрын
As far and the best flavor/vapor set. Saying that you are using the same rda / mech mod. Which coil would you prefer. Talking of which macro micro nano and super nano, single dual or quad coil and Dragon wicked or no which is the best. I have tried every combo and I've been going with the jumbo coil with a restrictive lung inhale and it is the best of both worlds. Just wondering what yours is.
@adeebnaveen5694
8 жыл бұрын
what should I do to get a 0.3 coil resistance ? I mean what type of wire/how many wraps...
@awkenney
9 жыл бұрын
Please discuss what coils work best on a mechanical mod, particularly how to build coils to heat either instantly or slower.
@PainterVierax
9 жыл бұрын
Macrocoils tends to need a bit of time to warm up correctly, like a diesel engine, but it can be nullified by increasing power. The higher your resistance is, the longer is the time to heat the coil so if you don't perform subohming don't go too far on diameter. You have to do some coil building experimentation to find the one you prefer for a specific atomiser. Rebuildable atty is really an « à la carte » vaping :)
@fslater102
6 жыл бұрын
Could you please make a video on how you make a super nano with fused Clapton? I've been trying and just can't get it right
@Trypno
9 жыл бұрын
Any benefit to a coil jig vs. the more versatile screwdriver set?
@omgcattime
8 ай бұрын
Thank you so much for the info i just did not understand till now
@itzzomen7470
9 жыл бұрын
super helpful Rip thanks man!
@daltonbarron6483
9 жыл бұрын
What's so good about vtc4s ? I'm just wandering cuz my efest is pretty good never had a problem with them also have some vamped 18650s
@azpajer8210
8 жыл бұрын
Hey rip, can you make a video on the difference macro, micro and nano. I mean i know the size of the kanthal are different and stuff but what's the different functions and about size of wrap. I don't get it, and maybe a few others don't get it either. I love watching your videos btw, your reviews and tutorials awesome and that's why I hope you can teach us difference. Thanks 😬👌
@TheMrskoon1
9 жыл бұрын
You could also explain what the difference in performance is say from a super micro coil and a macro coil and which is better for a rba or a rta
@ItsJakeTheBrake
9 жыл бұрын
those are some nice paintings on the wall! Where can I get those? Oh also thx for the coil tutorial.
@Ninjikun
9 жыл бұрын
Hey so, im recently getting into the modding scene of vapeing, after about 9 months of just having this cute little pen thing. I dont know the battery but I do know I have a Kanger Tech mini pro tank 3. Anyways, back to my question, so I am getting a Panzer here soon and I wanted to know how long coils last or how often I will need to rebuild them at all? Im not opposed to doing it at all but before I get into it I just kind of want to know, obviously from some one experienced.
@getchrisified
9 жыл бұрын
Hey Rip man I know your busy and what not reviewing your stuff but I would really like your opinion on the ipv2s just putting it out there.
@cojofoplays1837
9 жыл бұрын
In this series please go over the difference between bg coils and smaller.coils so a nano compared to macro id like to know
@NathanHazlett
9 жыл бұрын
For Cloud Chasers 301, have you looked at the Imren 3.6v 38A 2600mAH? This battery has performed solid for me at sub-ohm. No heat, no gassing, good life.
@hammbone852
9 жыл бұрын
You should make a video for the do's and don'ts of nickel coil builds
@dylanhopkins6027
8 жыл бұрын
riptrippers does the number of wrap you do make a different on a single coil build???
@hdee7566
7 жыл бұрын
Hey good vid, man! I can't find part 2, though. When I typed in, it's showing "Cloud chasing part 2" instead. 😣
@021dfred
9 жыл бұрын
Hey rip where did you get that lack drip tip you use all the time?
@mrpoundsign
9 жыл бұрын
One "tool" I found for making coils for kanger devices was a ball filling tip. Like for filling a basketball. They are super cheap and just about the right size.
@dook2317
6 жыл бұрын
How do you decide how big they should be or how many times to wrap them ?
@philipclark6000
8 жыл бұрын
Can I make coils using 24ga kanthal wire for my Uwell Crown RBA? If so how many rounds or coils do I use?
@JackSalemiJr
9 жыл бұрын
Did you ever do Coil Building 102?
@ningunners
9 жыл бұрын
May I ask...What are the ohms for the 24 ga. and the 28 ga. your using here?
@wyatt7066
9 жыл бұрын
seeing they never came out with the part 2.. does anyone know a good video that shows how to install the coil??
@soapchris3181
9 жыл бұрын
Hey RipTrippers, I know it is a newbie question. I've been switching to vape 2 months ago and I've always used a 2mm coil on my devices and tried quite a lot of the coils you're showing in your videos on this basis in my drippers. In what sense using a macro coil, or a micro coil, or a nano coil makes a difference on your vape ? Sorry for the bad english, I'm vaping in France.
@TheNicestWolf
9 жыл бұрын
FYI RiP. The batteries that have taken over are the IMREN 18650 38A high drain and the Vamped 18650 40A high drain. Those two are ***IMO*** the best on the market at the moment. The only other one I have vaguely heard of is some efest battery, but I have no info on it atm.
@SUPERSH00Mz
9 жыл бұрын
i have a lot of problems, with dual coils, getting each coil to heat up evenly any suggestions?
@grasshopper8185
7 жыл бұрын
how to change the diameter of a fused clapton? cuz It is too big for my obs crius rta v3
@gothicmetal05
9 жыл бұрын
I've run the efest purple 35 amps down to .05 and haven't had any issues like 6-7 sec draws
@MrBlayneo
8 жыл бұрын
What build would you suggest if someone is wanting a build that is more on the cool side?
@krich106
9 жыл бұрын
"Close as possible" is not a rule of the thumb. In fact it doesn't heat up quicker or better as long as you space it perfectly(just easier to crunch them together). But with having space between your wraps(equally spaced), they do not build nearly as much gunk over use. Which is a HUGE plus to me. It's rather simple. Just wrap and space the wraps apart equally as possible. Then instead of heating(Do not heat) Simply squish the coil with your fingers and let it spring back out. All the benefits of "close as possible" with the added benefit of not gunking up as quick. I wonder what this gunk does inside me...
@solodare06
9 жыл бұрын
know this is old but what about sticking the point of the needle into a pencil eraser that has been removed from the the pencil top? keeps you from getting poked and gives you something to wrap against. or even locking the needle into a locking pliers or vise grips. love your videos!!! thanks so much for all the help!!!!
@calixzt2203
9 жыл бұрын
Hey rip! i really love your coil building tuts. you asked for the rivals for VTC4s and VTC5s, try LG 18650s man
@OffsetCommon
9 жыл бұрын
I bought a Sigelei 100w...... What are the best batteries to run in this?
@michaelrendon9152
9 жыл бұрын
Which one of these coil wraps would you use for the diamond coil?
@andrewwalton788
9 жыл бұрын
hey rip i was wondering if u recomend 22 gauge for coil building
@deadlyknights1
9 жыл бұрын
whats the best coil to use for a freakshow dripper/18650?
@mikeyflysit
9 жыл бұрын
Thanks for the vid. I just bought my first rebuildable the other day. What a difference. I love it. I'm having my local vape shop help me until I'm 100% comfortable building.
@TheOfficialBeatBox98
9 жыл бұрын
in the UK we have 0.2, 0.3, and 0.4 wire, whats that equivalent to in Gauge?
@weredglass
9 жыл бұрын
Can you go over resistance also? Like how many wraps will give you so many ohms and different gauges of wires? That would be extremely helpful!
@lilunholy
9 жыл бұрын
for the super nano or nano, or any time you have trouble holding the screwdriver/needle. a set of vice grips can really make life 10x easier.
Пікірлер: 523