The video will guide you through removing and installing ignition coils on a 2001 Ford Crown Victoria with a 4.6-liter engine. Also, the repair is not extremely difficult and does not require a massive amount of tools, but some coils are not as easily accessible as others. I began by changing the coils of the left or driver's side of the car and switching to the right or passenger side. I did include timestamps below to allow you, the viewer, to navigate to a particular cylinder on a 4.6-liter engine. Thank you for watching.
1. From 00:00 to 00:15 is the introduction to the video, and the hood is opened on the car.
2. From 00:16 to 01:14, the engine cover removal is shown.
3. From 01:15 to 02:38, the air duct is removed.
4. From 02:39 to 05:13, cylinder number five coil is changed and located at the front of the engine on the left or driver's side.
5. From 05:14 to 07:17, cylinder number six coil is changed, and the second coil on the left or driver's side.
6. From 07:18 to 08:53, cylinder number seven coil is changed and is the third coil on the left or driver's side.
7. From 08:54 to 10:57, cylinder number eight coil is changed and is the fourth coil on the left or driver's side and the one closest to the firewall.
8. From 10:58 to 13:35, cylinder number one coil is changed and is located at the front of the right or passenger side of the engine.
9. From 13:36 to 15:32, cylinder number two coil is changed, and is the second coil on the right or passenger's side of the engine.
10. From 15:33 to 17:27, cylinder number three coil is changed, and is the third coil on the right or passenger's side of the engine.
11. From 17:28 to 20:13, cylinder number four coil is changed, and is the fourth coil on the right or passenger's side of the engine.
12. From 20:14 to 23:52, the air duct and engine cover are installed and the car is started.
Негізгі бет Автокөліктер мен көлік құралдары Coil on Plug Replacement, All Eight Cylinder Shown, Completed on a 2001 Ford Crown Victoria
Пікірлер: 8