You should get someone who knows how to do stuff to help you, cause man.
@codyswilley
11 ай бұрын
I've got 3 master links on my minibike. 😂
@demekamitchell404
7 ай бұрын
😂 I do too
@benzo8364
2 жыл бұрын
Hey can I take off the drive chain and still could use the stock chain…
@MERICANMOTO
Жыл бұрын
What length chain is needed my jack shaft has exploded for the 2nd time and I don't Wana replace it
@jesseholland1851
5 ай бұрын
Im also tryna figure the length needed if u found out?
@GluteusMax777
2 жыл бұрын
It needs a a chain tensioner is all.
@adamdomonski1619
Жыл бұрын
You can always add one but I don't run one
@qt_doppkeboi923
Жыл бұрын
@@adamdomonski1619 my chain tensioner broke off how did you solve that problem
@smashedbyhashish
Жыл бұрын
Good video, thank you.
@DillonMcGee5.0
2 жыл бұрын
the clutch doesn’t break in for me it still smokes, but it’s fast
@twistedkap3882
Жыл бұрын
Same
@Deucealive75
Жыл бұрын
That's because the gearing is so bad. If I wanted to street ride with a straight chain like this I would build an engine capable of 7K RPM and use a 72 tooth sprocket. It would then have decent low end, cruise nicely at 35 mph and capable of 50 mph. A 72 tooth sprocket would work with a stock engine but you just wouldn't have as high a top speed. My Colemans are used for trail riding only. The torque converter is the way to go for off road.
@troyholland3436
Жыл бұрын
Bro put a bigger sprocket on it unless ur fine with buying a new clutch every month
@Bataha
Жыл бұрын
yes, at least a 60 tooth but most likely a 70 tooth. I ended up putting a torque converter on it with a 40 tooth rear.
@troyholland3436
Жыл бұрын
@@Bataha will it still go fast with the 70 tooth straight chain?
@tripps5549
2 жыл бұрын
My jack shaft just spins when I try and take off the bolt please help
@Bataha
2 жыл бұрын
have you tried holding it with vice grips?
@tripps5549
2 жыл бұрын
So what I had to do was take a wrench and put it on the bolt and hit with a hammer and it came loose
@visiongames0681
2 ай бұрын
I used a fast drill with a socket on there and it breaks loose from it I just did this yesterday😭
@qt_doppkeboi923
Жыл бұрын
Could I remove links in my clutch chain because I don’t have a chain tensioner it broke off
@jasongilliland9508
Жыл бұрын
Yes, if you get the chain to fit good with no tensioner on it, that's way better.
@chuckhuff7123
7 ай бұрын
Is weed legal where you live?
@ItzMoyyGamings
4 ай бұрын
What type of torque converter would you recommend
@Bataha
4 ай бұрын
You can just get one off of Amazon, they’re pretty good quality. Check out my other video on installing a torque converter. kzitem.info/news/bejne/0JegzYagqKankn4si=qKblXMqhfujinKSb
@jesseholland1851
5 ай бұрын
What length chain did u use #40 i know is the size of the chain but what lenth
@56135613at
2 жыл бұрын
Bout time
@mackkess2238
2 жыл бұрын
What size chain is needed?
@Bataha
2 жыл бұрын
40 chain
@tlord3316
Жыл бұрын
What length
@Payycheckk
Жыл бұрын
What size is the chain for the jackshaft
@jesseholland1851
5 ай бұрын
What length 40 chain?
@Minibike817
2 жыл бұрын
What's the top speed on it?
@Bataha
2 жыл бұрын
Check out my other video
@MalikCooley-wn2nr
Ай бұрын
Is it the 140 link
@chuckhuff7123
7 ай бұрын
Oh boy😮.
@MiguelGomez-tb5pc
Жыл бұрын
You Lokey sound like Evan peters girl American horror story
@user-gi5yg1vd7m
Жыл бұрын
What kind of clutch did u use?
@Bataha
Жыл бұрын
Stock clutch
@daytondurocher3382
Жыл бұрын
How many links are on the chain?
@WetleySped
11 ай бұрын
I can’t get the bolt off that’s on the clutch. Any help
@Bataha
11 ай бұрын
Use an impact and hold the clutch in place. If that doesn't work heat it with a torch.
Пікірлер: 52