Paul, great video very well explained. Appreciate the no-nonsense approach.
@fordywatza
3 жыл бұрын
Thanks Brian 73
@GerryCoyle
6 жыл бұрын
Great video Mr Ford & well put across 👏🏼👏🏼👏🏼👍🏼
@fordywatza
6 жыл бұрын
Thankyou mr Coyle couldn't have done it without you!!!
@scottjohnson3226
3 жыл бұрын
Thank you for the informative video!
@wipithon
2 жыл бұрын
Excellent video, good explanation
@nrfchannel8580
Жыл бұрын
Very simple and concise description thank's 73
@Flip2Flower1
4 жыл бұрын
Also to anybody, don’t forget to ground your mixer or else you will get terrible feedback. I learned this the hard way
@hugoalmeida1977
3 жыл бұрын
Hello congratulations for the video and the explanation, you have to place a Di-Box between the Radio and the Mixing Table, because of the different impedances between the radio, microphone and mixing table. So the audio will be much better. 73s
@DAVE_WHITE
2 жыл бұрын
I can not stress the importance of a DI box as well.. This is something 99% of the videos leave out yet 60% of operators are struggling with noise.
@snippits75
6 ай бұрын
W2IHY iBox works very good. Can be used for line level or mic level.
@frankbaron1608
Жыл бұрын
also keep an eye on the alc on the radio. does that kenwood have ALC?
@DAVE_WHITE
2 жыл бұрын
I can not stress the importance of a DI box as well.. This is something 99% of the videos leave out yet 60% of operators are struggling with noise.
@timw6513
4 жыл бұрын
Hi Paul. Thanks for sharing your video. Can the mixer desk be connected to two transceivers (so that you can use a common microphone)?
@fordywatza
4 жыл бұрын
Yes Tim it can. Use one output ie [left main] for one radio [right main]for the other.But you might have to adjust your levels and eq for each radio!!
@cacciskagrana6603
Жыл бұрын
excuse me another question, but your voice does not make you return to the radio column ??. thanks.
@tomassandoval4590
4 ай бұрын
Buen ejemplo bravooo gracias My qrz is torre alfa .. 73
@stuartmoon6133
Жыл бұрын
Should be using left/mono out to radio,then you wont need to pan right.
@frankbaron1608
Жыл бұрын
you should always set your main mix to unity (zero in the display) and alter the gain on the mic channel for gain. the main mix is not meant to be a volume control
@steviegillespie5021
6 жыл бұрын
2I0HWW, Good video Muck's.... Straight forward and to the point.... vy73 de MI0GTA
@fordywatza
6 жыл бұрын
Thanks Stevie 73s
@sarasilva-uh4ye
5 жыл бұрын
Very nice explanation the best i have seen so far. Goog job. 73s from 75LR001 Pico island, Op: Olimpio Fraga.
@cacciskagrana6603
Жыл бұрын
hello, can you post six connections diagram with the various connectors? thank you.
@nordland2235
2 жыл бұрын
That is what I need...that adaptor connects the big phone jack into the little female jack that puts the audio from the mixer into the radio.....the little silver male/female jack....its at 5:31 minutes into the video....I cannot find one.
@fordywatza
2 жыл бұрын
Hi, you should get the adaptor no problem on ebay or amazon 3mm to 1/4 inch jack adaptor. 73.
@fordywatza
2 жыл бұрын
I have one here. Send me your address and I'll post it to you.
@louisf8428
4 жыл бұрын
73.51 voila je voudrai savoir ou vous avait trouver votre cordon prise micro pour le ts140 s pour le branchement a la table mixage , cdl 14 fox lima 22 , operateur louis
@brunocdt2765
4 жыл бұрын
Un cordon ça se fabrique . Il utilise 2 jacks (6.35 et 3.5) ainsi que 2 XLR (mâle et femelle) je viens d'en faire un pour mon Ic 746. Le plus dur étant de trouver le câble ! Bonne bricole. ;) 73 de F4DNP.
@louisf8428
4 жыл бұрын
73.51 merci pour les explications , je vais essais dans faire un , mais vous vous pouvait pas me faire un , je vous paye les fais de livraison + le cable , cdl louis 14 fox lima 22
@howardstieber5943
Жыл бұрын
Hi ...Love your video...please get back to me and let me know if the mini (3.5mm) jacks are mono or stereo) Call sign is NE8J. Please post the answer here. 73's...Howard NE8J
@fordywatza
Жыл бұрын
Hi Howard, I use mono. And have also put a passive d. I. [direct input] box before the mixer, this is great for changing balanced to unbalanced signals before the radio and takes care of earthing issues as well. I also use large clip on hexagon ferrite rings on all Audio leads to stop stray rf. Hope this helps 73. Happy Easter Paul.
@victorb22622
Жыл бұрын
Who will purchase thesw much more stuff just to add condensor mic
@k2icc
3 жыл бұрын
48V phantom power to radio?
@fordywatza
3 жыл бұрын
Phantom power to condenser microphone.
@k2icc
3 жыл бұрын
@@fordywatza Wont the Phanton power hurt the radio? I believe Heil uses a capacitor. For example, my Shure SM7B is dynamic, but needs phanton power to the CL-1 box, then cable protect the radio. I know phanton power on radio is about 8V but mixer phantom power is 48v.
@fordywatza
3 жыл бұрын
@@k2icc phantom power from mixer to condenser mic.plug mic with xlr to mixing desk.guitar lead from mixer ouput channell.but you must assign the channell to your specific output main out or control room.
@k2icc
3 жыл бұрын
@@fordywatza I got all of that, as the condenser need phanton power, but in new radios, such as the IC-7300 that I got, I have seen that phanton can damage the radio. I can do that as shown with a dynamic mic as no phanton needed. But Will keep researching. Thanks for the help. It may be the case that while the microphone in your set up uses phantom power for the mic, such phanton power will not come out of the mixing console out. That is basically my question of that make sense. I use the mixer with amplified speakers, but also fed to the radio when not.
@fordywatza
3 жыл бұрын
@@k2icc ok thats a way to go.sometimes i just use an sm58 strait into a heil adaptor lead and bobs your uncle 73s stay safe and in touch.
Пікірлер: 44