Craftsman LT1500 will stall out going up grade because the transmission drive belt is old and worn out. You can switch to a higher gear but as soon as it begins to move it will go too fast. The hardest part is getting the new belt over the pullies and over the idler pully. The trick is drop the transmission and with the chassis on a jack, push the left wheel forward. That will open the gap between the large pully and the chassis frame. Use a prybar to move the idler pully enough to get the belt over the top. Good luck and watch your fingers.
The belt amzn.to/3MUTvvO
Негізгі бет Craftsman lt1500 Transmission Drive belt Replacement
No video
Пікірлер: 9