I'm new to computers period. I've decided to pick a computer and this printer up, it's definitely intimidating. But your videos definitely make me feel better.
@teearr9120
3 жыл бұрын
You convinced me to subscribe! Love your no BS approach, I feel like you're giving me the tools to make my own choice, and not bound by a "sponsor". You convinced me on the 5-PLUS, and actually just received it. I'll keep coming back as I progress along, so keep the vids coming!
@FranklyBuilt
3 жыл бұрын
Heck yeah!!! I appreciate that so much. I try not to just “sell you stuff” I use this stuff too ya know? I’d hate if someone blew smoke at me.
@teearr9120
3 жыл бұрын
@@FranklyBuilt I just wanted to thank you. I did the extruder upgrade, and I love it. IT really is a lot easier to load filament it seems. No more fight to put it through the extruder! Also just feels a lot more sturdy.
@plop4493
2 жыл бұрын
Thank you very much for this video and the ender 5 build video. I was a bit nervous at first, but after following your instructions I was able to upgrade my printer after I clogged the nozzle. Very helpful videos - I am less worried about my abilities now!
@deltatango5765
3 жыл бұрын
I just bought this for my first printer yesterday, scheduled to arrive in 8 days. I watched the assembly video, and this one, beginning to end. BIG thanks! These vids will be an enormous help! Subbed!
@reesekilpatrick241
Жыл бұрын
How was it
@deltatango5765
Жыл бұрын
@@reesekilpatrick241 The first one I received had a bad power supply and died within 30 minutes, but I exchanged it (what a pain disassembling and packing it up again!) and the new one is absolutely flawless! I couldn't be happier. Good size bed and excellent prints! Had to learn to adjust the settings a bit through trial and error, as well as videos like this, but in the end, I'm so happy I went for this one.
@reesekilpatrick241
Жыл бұрын
Ended up grabbing one aswell thanks for the info!
@samuelboone7495
3 жыл бұрын
Dude, this guy's stuff is legit.
@andresruiz1213
3 жыл бұрын
Of course it is, did you see his hands?
@FranklyBuilt
3 жыл бұрын
Huh?
@superchargedkayaker
2 жыл бұрын
Thank you so much. My Ender 5 Plus is new and the prints keep getting worse and worse. Sure enough,a broken extruder arm. Now the E5P is hammering out perfect prints. Thanks for this video and all the others, they are so helpful.
@AndrewElmore-s9g
Жыл бұрын
Frank is more helpful than me instructions and the crealiry support people combined. Thanks so much bro, keep it up. Can you do a hot end upgrade video for the spider high temp high flow v3 pro? Thanks.
@DukeFavre
2 жыл бұрын
I love so much my ender 5 plus. And your videos! Thank you so much Frank 🤘
@nhrafan07
2 жыл бұрын
Thanks so much for this video! I’ve followed you on TikTok for a while and just got my new aluminum extruder & knew exactly who could make the process simple. Keep up the awesome work!
@josephosorio5718
3 жыл бұрын
I have been using glass beds for years and swear by them. The best way to clean them, I have found is to use Camera Lens Cleaner. It doesn't leave any residue. Also the Anycubic Ultrabase works well... if you keep it clean and let the prints cool before forcing them off the plate. I'm beginning to like the Ender-5 Plus, may end up getting one, if so I will use your link to help out your channel.
@FranklyBuilt
3 жыл бұрын
Dude thank you so much!!
@Milnephotagraphy
3 жыл бұрын
just bought this printer as our first 3d printer cant wait to get started
@namethandir1711
3 жыл бұрын
Best tutorials i have found about my printer, thanks bro
@NDT-hw7nr
3 жыл бұрын
Thank you! Changed both of them right along with your video! Great work!
@zorsenothorse
2 жыл бұрын
been watching all your videos just took out paypal credit and going to buy one ender 5 plus, thank you :)
@muskratranch
2 жыл бұрын
THANK YOU SO MUCH!!! I love this printer and the prints were amazing!! But the quality of my prints were getting worse with every print. I took the extruder apart and looked at the plastic arm and sure enough, it was cracked just like you said in the video. Installed the metal kit and it is printing better than new.
@MLLxYLLmedia
Жыл бұрын
Just got this printer on your second video and super informative
@FranklyBuilt
Жыл бұрын
Glad it was helpful!
@jessielee278
2 жыл бұрын
Just bought my first printer. Great tutorial Frank thanks
@munawarsoomro8958
2 жыл бұрын
Nice video. I'll look for yours with dual metal extruder. But my E5+ extruder motor had pressed on gear and short shaft!
@samuelrosario570
3 жыл бұрын
Can't wait for my extruder kit and capricorn to arrive!!
@davidjoseph657
3 жыл бұрын
Thanks for the info, i'm installing this exact same kit, and wanted to get a visual of what to do before i started taking things apart
@berticusmaximus7423
3 жыл бұрын
Great video! This and your build video of the ender-5 was a HUGE help!
@kaywan6689
3 жыл бұрын
save my life, thank you for posting the video
@Chriss_Workshop
4 жыл бұрын
I had horrible jamming in my E3 and it was because the bowden was statting to melt slightly. Cant stress enough how important it is to swap to capricorn asap
@cavenmatsen2841
Жыл бұрын
The screw for the spring was on the other way on the original extruder to be able to adjust spring tension. Be a real pain adding pressure with the screw head inside the spring.
@twistedcheeto4876
2 жыл бұрын
For some reason the only way I can get it to extrude properly is to push down on the lever. If I don’t the bearing won’t spin like it’s supposed to.
@simonbionary11010
3 жыл бұрын
I am blown away how good this instruction video was:) Still deciding on which printer to buy but i am leaning toward a Creality. It will be my first so i am reading and learning as much as i can about 3d printers until i decide which to get. Creality Ender 5+ Anycubic Chiron Wanhao dupicator d12/300 are the ones im picking between. Any recomendations for a first printer with helmetsize printbed? I i am currently learning about the assembling and upgrading and such. So even if i never had a machine i think i will have a good chance to work things out. Subscribed!!!
@chrismapley7513
Жыл бұрын
Thank you for your info very informative and educational
@AndrewAHayes
2 жыл бұрын
I have 2 Ender 5 plus printers and one came with a keyway on the motor stem but the newest one didn't and there are no grub screws holding the gear on, trying to get the gear off was near impossible (as though it was epoxied on) so I bought a replacement motor (different wiring setup) and a genuine Bondtech BMG extruder as when printing fast on the other machine with its copperhead the aluminium extruder was struggling to supply enough filament and caused under extrusion so I had to slow down but the Bondtech has no problem with speed.
@modernNeanderthal800
Жыл бұрын
Can I swap the original extruder gear with a direct extruder kit? Do you have a kit or instructions you suggest? Ty for this video
@dsmith8616
Жыл бұрын
that's my next project with my Ender 5-Pro (I know it's not a plus, but it's essentially the same) is swapping out the Bowden Tube, for a Direct Drive.. I'm willing to sacrifice a bit of speed for reliability and ease... make it so its easy for anyone in my house to use without having a degree to operate it. LMAO
@ryandowney8743
3 жыл бұрын
Thank you for the video, it was helpful. I plan on changing my extruder to a dual gear extruder. And when I do that I understand I need to adjust the e steps on the settings to make sure it is extruding the proper amount of plastic. How do I do that on the Ender 5 Plus? The touchscreen menus are completely different to the typical Marlin scroll knob menu on my regular Ender 5, and I don't see that option anywhere.
@earlowens998
3 жыл бұрын
Creality Ender-5 Plus arriving Monday 3/15/2020. I'm watching videos hoping to get this thing right.
@SenorYuk
2 жыл бұрын
Hey neato. Just FYI the countersunk screw goes in the countersunk location.
@ColourInCircles
2 жыл бұрын
Hi! I just ordered my very first 3D printer - an Ender 5 Plus! Can I make these upgrades (the metal extruder and the Capricorn Bowden tube) in initial set up and build, without having to heat it up first? TIA!
@seekertosecrets
4 жыл бұрын
I will have to buy one of those kits before the end of the year.
@oldpapertrader8069
3 жыл бұрын
Great job on this tutorial, 5 stars!
@yohannsantos4901
2 жыл бұрын
Hi! Do you notice any wearing on the belts in the Y axis?
@barder194
3 жыл бұрын
Frankly Built....They make hex screw plate clamps that tighten down via hex key ive notice the same thing with the binder clip might be something worth investing in
@I2ocker89
4 жыл бұрын
Hey I had a question, you mentioned you used a 3d STL ruler file to do measurements in Cura. Where did you find that? Currently getting all the files ready for print while waiting for 3d printer, trying to figure out the electronics also lol i did leds in a 12 in ironman model i had built but that was 7 years ago. Brushing up Kid you not probably watched 10 of your videos a day preparing
@FranklyBuilt
4 жыл бұрын
I actually can’t find the stl anymore haha it was on Thingiverse.com somewhere And that’s awesome!
@fredmartens7126
3 жыл бұрын
Thanks a lot for a great video!
@relivec
2 жыл бұрын
is it possible to put a volcano nozzle on this printer?
@ke5851
3 жыл бұрын
First of all thanks for all your vids, I did the original install of my ender 5 plus and this via your vids. Secondly, does it matter what length the lube is as mine was slightly longer than stock? Also in a slight related (maybe) not, my extruder does worse then than stock, any ideas? I have had a lot of issues with my ender 5 plus levelling and I'm installing a dial indicator tomorrow so fingers crossed!
@badgimp4577
Жыл бұрын
the extruder is your hot end, it extrudes the melted plastic. What your calling the extruder is the feeder, because it feeds the filament into the extruder.
@FranklyBuilt
Жыл бұрын
Sorry that’s not accurate. Your extruder is the gear and lever arm that forces the filament through. The hot end is the section that heats up.
@tyrayhobdy1491
3 жыл бұрын
Appreciate the video this helped out a lot
@melissamiller3466
Жыл бұрын
After changing the extruder did you have to redo your e step?
@richardbennett8678
2 жыл бұрын
Is your printer loud. Another video says to replace the board with a silent board. What do you think?
@AriesThrottle
3 жыл бұрын
That one screw at the upper part should be put the right way with that spring... There's one part missing for the screw like a rivet head helping to add some pressure to that spring...…
@gwen436
3 жыл бұрын
Omg. I'm obsessed with that tool holder. Do you mind sharing where you got that? Thank you.
@FranklyBuilt
3 жыл бұрын
I have no idea lol thingiverse somewhere last yeah
@gwen436
3 жыл бұрын
@@FranklyBuilt thank you. I'll check again.
@SteveMajor
3 жыл бұрын
Just got this printer a couple of weeks ago. My stock tube is already slipping and the Capricorn with fittings is on the way. I'm interested in the metal extruder, would you share a link for it if it's still meeting your expectations?
@FranklyBuilt
3 жыл бұрын
It always is. It’s a must have. Check Amazon
@Nochannel853
4 жыл бұрын
Would you be able ro go through your 3d printing software setup, settings and how you have your supports I've been trying to find out how you do it but I'm having no luck.
@FranklyBuilt
4 жыл бұрын
Matthew Miller already have videos on that!
@stephenlindsey9233
3 жыл бұрын
@@FranklyBuilt where are the videos
@FranklyBuilt
3 жыл бұрын
Search for them lol it’s literally called my 3D printer settings
@miosis23
3 жыл бұрын
my y wheels were too tight out of the box as well. so tight there was 'notching' as it travelled
@zbravi7812
3 жыл бұрын
I can help out with the back left ending gcode problem out of cura :) mine stops on his zero like he should in the right back
@callumbrackley2917
3 жыл бұрын
Hey mate I do not have that Elen key thing 9:30 to loosen the pinion I need to move it a bit because it has worn down and the filament is not feeding properly what do I do?
@ccrider494
3 жыл бұрын
Thanks for all the info, what do you know about upgrading to the silent mother board?
@b.shed26
2 жыл бұрын
Would the bondtech bmg extruder work/be a good upgrade for the ender 5 plus?
@AndroidG13
3 жыл бұрын
My extruder motor has a push to fit gear. Do y'all think I should try to remove the gear or get a whole new motor with a beveled edge instead?
@MichaelWeir-v2e
Жыл бұрын
Good morning, I have a question about the Ender 5 plus and the upgrade to the all-metal extrusion. What would be the best way to contact you to ask this question don't want to say anything negative on your page.
@mysterio3d729
4 жыл бұрын
Awesome
@jakubrafajdus1599
3 жыл бұрын
Hi great videos :) I am thinking about buying my first 3d printer and I really like ender 5 plus, especially due to its huge printing volume but are the prints as good as smaller printers like ender 5 pro or ender 3 v2? I would like to have the bigger printing volume but not at the cost of printing quality. Which one of them would you choose? Thank you so much
@lennertlaevaert8711
2 жыл бұрын
Oh Great, the allen-key bolts you talk about at 9:33 aren't there on my printer, the extruder gear is pressure fitted to the stepper motor and I have no idea how to remove it...
@Soniti1324
2 жыл бұрын
Me too!! What do I do?
@lennertlaevaert8711
2 жыл бұрын
@@Soniti1324 I ordered a new stepper motor for like 10 Euro and used that one instead.
@truenorth2615
3 жыл бұрын
Don't you have to calculate and adjust extrusion and retraction rates when you change this part?
@FranklyBuilt
3 жыл бұрын
No. This isn’t replacing the stepper motor just the gear and lever
@ohyeahitsquack
2 жыл бұрын
Is the coupler supposed to thread in on top? There is no "female" thread on the top of the extruder I got from amazon.
@ohyeahitsquack
2 жыл бұрын
Update: the kit I bought no longer uses the threaded coupler. Installed correctly.
@johanneshemmes7877
3 жыл бұрын
Late comment but have you seen an issue with buying the all metal extruded and where you screw in the nozzle it doesn’t have threads? I’m stuck with this and thinking just put plastic back on
@FranklyBuilt
3 жыл бұрын
You might have been sent a defective one
@thestreetzking
3 жыл бұрын
Hey! Just got mine setup based off your last video and upgraded as of this video, what a jump from my 3 Pro lol. Is there a way to get rid of the triangle purge line? Besides turning off auto leveling
@FranklyBuilt
3 жыл бұрын
Not that I know of. Keep it tho. Its very handy for ensuring you have good adhesion and level before the print starts
@Hammer.Paladin
3 жыл бұрын
How do you adjust the media flow? Upgraded mine with dual gear extruder and now it under extruds. I'm getting just 67mm in a 100mm feed test run.
@FranklyBuilt
3 жыл бұрын
No idea 🤷♂️ I didn’t have to adjust anything. You didn’t change the stepper motor so there shouldn’t be a reason to adjust esters
@andrew6608
3 жыл бұрын
My original excruder key that came with the machine doesn’t have Alan bolts on it. No idea how to take it off or if I even should? It seems to grip and spin fine
@Skott62
4 жыл бұрын
Great video Frank. I discovered your channel yesterday and I subbed but I had a question for you. You have a CR-10s and you moved up to a Ender 5 Plus for the larger size. Since you do cosplay prints why the Ender 5 Plus and not one of the larger CR-10 printers? I been contemplating a larger printer for such reasons myself and was curious about your opinion/reasons for not going even larger than the Ender 5 Plus.
@FranklyBuilt
4 жыл бұрын
I also have a cr-10max. But it’s slow. As you go up prints slow down. The 5plus is a great middle ground. The s4 and S5 are problematic sometimes
@Skott62
4 жыл бұрын
@@FranklyBuilt Thank you for the reply Frank. I know you are a busy guy. After I asked the question I saw your print room video and your vlog had answered some questions. Next printer I'm thinking going bigger and I'm looking at the Ender 5 Plus and the CR 10 MAX and you gave me some good info to go on. Thank you.
@gwen436
3 жыл бұрын
Hello. My bowden tube is loose, the side where the extruder is. Do I need to replace the coupler? Thank you.
@FranklyBuilt
3 жыл бұрын
Probably
@Backyard_props
4 жыл бұрын
Hey man great vid, I have one of these coming, I wondered what PLA+ do you use? I’m in UK also so was wondering where is best to get it from?
@FranklyBuilt
4 жыл бұрын
Evil_Dead_Chainsaws hey man that’s awesome! I use Sunlu PLA+ and Monoprice
@emmabanks553
3 жыл бұрын
If the tension on the extruder arm is too taut, how do I loosen it off a little?
@carpanetosoccorso
3 жыл бұрын
Hi, better ender 5 plus or cr 10 s pro v2
@jpage5303
3 жыл бұрын
ender 5 plus
@thestreetzking
3 жыл бұрын
Hey Frank, was the bed sliding around causing banding? Im having a bad banding problem now since I started doing taller prints, its super noticable at heights over 7 inches. All belts are tight, I just got new flex couplers and anti-backlash nuts but I havent installed yet, thats next step. But I was wondering if its the binder clips like you said
@FranklyBuilt
3 жыл бұрын
Could be the clips. Kind of odd. Mine doesn’t do that
@raimiallpowerful2020
4 жыл бұрын
out of curiosity, how much did it cost? i want to get into it (i'd start with some faceshells i want to print)
@FranklyBuilt
3 жыл бұрын
Uhhh no idea haha hop on google
@stormacraft9882
4 жыл бұрын
I'm going to start 3d printing what modeling software do you use
@FranklyBuilt
4 жыл бұрын
None. I don’t know how to 3D model yet
@stormacraft9882
4 жыл бұрын
@@FranklyBuilt but how did you print the suit
@FranklyBuilt
4 жыл бұрын
stormacraft with my 3D printing lol you’re confusing 3D modelling with printing. Keep watching it videos. Go watch my “how to 3D print” video
@stormacraft9882
4 жыл бұрын
@@FranklyBuilt ok
@stormacraft9882
4 жыл бұрын
@@FranklyBuilt but what I'm trying to say is how did you get the files
@zeraigon9833
4 жыл бұрын
May i ask ender 3 V2 , ender 5 pro or ender 5 plus which one is better for beginner ???
@FranklyBuilt
4 жыл бұрын
That’s not even a competition haha Ender 5 plus all day. It’s huge
@zeraigon9833
4 жыл бұрын
Tq for the reply and i cannot wait for the finish mk39 of yours 😊
@shanobix
3 жыл бұрын
Frank! What do you think about the direct feed?
@FranklyBuilt
3 жыл бұрын
I think it’s a waste on normal FDM printers unless you start printing crazy weird materials
@shanobix
3 жыл бұрын
@@FranklyBuilt ah okay. I actually heard about it in a tpu video lol. Thanks for the response !
@Tullerion
3 жыл бұрын
Take a shot when he says actually lol
@tanman226
2 жыл бұрын
So I need a lot of help, what is happening is that the Bowen tube is slipping from the metal plate where the filament goes into. The little rubber part that you push down to lock in the Bowen tube keeps popping up. I have a ender 5 pro, the fully upgraded version with the red feeder and the blue bowen tube. Please help and FAST
@izoyt
3 жыл бұрын
this (with few mods) or cr-10s pro v2? i really have hard time deciding...
@FranklyBuilt
3 жыл бұрын
This with a few mods only if you’re okay getting youre hands a little dirty
@snax_4820
3 жыл бұрын
Show man
@fotomeinema-annemeinema3974
3 жыл бұрын
Hi, can you tell me what the buildplate size is of the plus see everywhere 350x350 but i believe it is 370x370
@FranklyBuilt
3 жыл бұрын
350x350x400
@fotomeinema-annemeinema3974
3 жыл бұрын
@@FranklyBuilt Thank you
@tanman226
2 жыл бұрын
Ok I need a lot of help, so what is happening is that I have the endet 5 pro, and the Bowen tube is slipping mid print out of the the metal plate where the filament goes into. Please help
@franktt736
3 жыл бұрын
Did you do the hot end fix?
@FranklyBuilt
3 жыл бұрын
Nope never needed too
@stephenlindsey9233
3 жыл бұрын
I can't get my Ender 5 to set the Z0.0 when I set properly and push the Z 0 button it raises up the 20mm. I've tried everything I would appreciate any help
@rd5033
3 жыл бұрын
Thanks for the video--I bought one from Creality but the coupler does not have anything to screw into. There are no threads at the top of the extruder for the coupler. Is there supposed to be an insert or something?
@FranklyBuilt
3 жыл бұрын
Yeah that’s super weird. Might be a defective one
@ph_low628
2 жыл бұрын
My filament is grinding. Gonna throw it at the wall.
@curtokay8046
2 жыл бұрын
Does anyone know what size the set screw on the extruder gear is?
@ammarali5134
4 жыл бұрын
Is it just as loud as the cr-10?
@FranklyBuilt
4 жыл бұрын
A little louder actually but a silent mainboard makes it invisible
@ammarali5134
4 жыл бұрын
That's always been creality Achilles heel. Supposedly the new CR 6 is silent but we will see.
@tomdamage9321
2 жыл бұрын
Wtf i cant screw coupler on top because there are no threads inside of the metal hole ffs
@theancientones3755
2 жыл бұрын
good vid nice info but be alittle nicer to your hands dude
@oneofthechosen874
3 жыл бұрын
Dude. Please take care of your fingers...those look painful.
@redshadow3095
3 жыл бұрын
Nice video however it is nothing like a core xy or even close to that type of concept, A core XY printers movement mechanics like a delta, having multiple motors working on movements to lighten the load while moving, like a delta math calculations are a lot higher load then this Cartesian printer, it has nothing to do with the shape of the cube, or bed movement up and down, its to do with how it moves, Core xy uses two motors at the same time to make xy movements working together on same belt paths. as a delta does using all three motors and belts at once for its movements, :D just so you sound smarter for your other printer videos as to not compare apples to oranges. Also to bad companies would stop putting in cheap crap quality parts to make some one spend a half a grand or more to have to spend more to ensure it works properly so irritating to me and im sure others.
Пікірлер: 143