Thank you so much. I was looking for a tutorial exactly like this!❤
@KannonStudiosOfficial
6 ай бұрын
Glad it was helpful!
@DonFassbender
8 ай бұрын
Nice tutorial, thanks for sharing!
@KannonStudiosOfficial
8 ай бұрын
Thanks!
@thinkbolt
4 жыл бұрын
A Kiki Kannon tutorial!
@KannonStudiosOfficial
4 жыл бұрын
😂
@Batsand_bones
3 жыл бұрын
Don’t know if you still answer but do you know of another glue to attach the foam pieces together that isn’t toxic? I don’t have a mask and can’t really afford one right now
@KannonStudiosOfficial
3 жыл бұрын
Hello! I was looking around my studio and did a test with Elmer's Craft Bond a spray adhesive. It seems to be holding well for the thinner foam 2mm. You do not need a mask,. but avoid skin contact. It is flammable and recommenced to use in well ventilated areas (these are kind of a standard for most glues). As far that the pieces that may need a better bond on thicker pieces hot glue should work. Score the pieces first for a better bond with the hot glue. Once everything is sealed,. it should also help hold everything together but honestly I think it should hold together just fine! Hope this helps! Just from my small experience,. it could be useful to tape down pieces right side down and then spray the glue on the wrong side. This way they won't go flying about and you will not get glue on the right side. Also be sure to spray both sides for a better glueing! :)
@KysEcstacy
Жыл бұрын
Hot glue works, although it may pour through some seams if you use too much. High temp is what u reccomemd since it sticks better due to it nelting some of the foam together
@andygarcia3599
3 жыл бұрын
This is awesome
@KannonStudiosOfficial
Жыл бұрын
Thanks!
@KysEcstacy
Жыл бұрын
How would i do this if i dont havw an emblem on the belt to hide the foam in?
@KannonStudiosOfficial
Жыл бұрын
I hope that I understand the question. You could put the seam at the back, and minimize its visibility by adding a piece of hook side velcro on the backside of both ends - then use one piece of the loop side velcro for those attach too. Giving it a fairly seamless look!
Пікірлер: 13