Well, for a long time using low cuts on the subs i didn't realize that it leaves artifacts and alter the phase relationship between the two sounds. In that case kick and bass. Even with a linear phase eq there are artifacts. And the steeper the low cut is, the heavier the artifacts is. So when i begin with a kick and a bass, the first thing i take care is the phase relationship between those two sound's. To avoid the phase mess from the low cut's and the latency added from various VST effect's, i usually follow this order: when i am finally happy with the kick and the bass sound's like, the first thing i do is to export one single note of the bass on wav, i shape the bass sound with fades so each individual notes to hit clear with no overlapping each other, i load the sample in simpler with the performed fades (ableton users know what i am talking about), and from the simpler i put the transient of the sound to start from the beginning. So this way i eliminate the low cut's artifacts (for example the pre-ringing effect that linear phase eq leaves) and the latency added from each individual VST effect i use. Then i go to the kick synth and i make the final adjustments to achieve the best phase alignment i can. When i do that i export the kick on wav and finally i have a clean and stable kick and bass no matter what. This process i know take some time but for me it worth it! The truth is today the kick and the bass is the most important thing in trance genres.
@babyfacelokito2469
Жыл бұрын
Tutorial please
@UralaTAO
3 ай бұрын
Good 1 brother :)
@Laseurda
5 жыл бұрын
Thank you for teaching people to make it right , to work with frequencys!!!
@cedricdhermo8493
3 жыл бұрын
WHAT a track !! and that was 2018 !!! Wow i need to learn !! Thanks man !!
@rieyaadismail830
6 жыл бұрын
I like how you mix your vids from mixing to sound design etc :)
@christophschofmann-herzarb1987
4 жыл бұрын
thx man - very enlightening
@LuisMejia-qv1om
6 жыл бұрын
good tutorial, make a video about the types of processes for bass lines, I would like to get a bass line like this track Re-Twin - Sophie (Original Mix) Greeatings from Mexico
@allanoliveira6674
3 жыл бұрын
Thanks man
@MrDobleagent
2 жыл бұрын
Great tuto, do u have one of how do u manage general levels on the mix? there is non tutorial about this in Psy-Trance so could be good to have one of how u do, and maybe this push others to make more, there is a lot tutorials about mixing other kind of genres
@1811can
5 жыл бұрын
Dude what is the point of reducing frequency that you boosted on bass? They dont hit at the same time they cant clash ?? Can you make it clear..
@deathmetal5156
4 жыл бұрын
i think its becouse of the release of both
@Etnikal54
6 жыл бұрын
Great idea to take down 2 picks points instead of one. I will try that. But you didn't make the inverse process? Like moving the kick pick frequency on the bassline ?
@DashGlitch
6 жыл бұрын
You can apply the theory both ways, I was just explaining the process :)
@gomezalex1995
6 жыл бұрын
🤙🏻
@DashGlitch
6 жыл бұрын
🕺🕺🕺
@lavi061997
6 жыл бұрын
Can you do a full track tutorial one day it would be great.
@DashGlitch
6 жыл бұрын
Check out my full psytrance playlist ;)
@rohittambulwadikar4724
4 жыл бұрын
Can you please please do a tutorial about the bending bass sounds in the drop of Answer from the stars vinivici vs bizzard
@q3rageq3
6 жыл бұрын
great tut! why don't cut kick fundamental from the bass as well?
@DashGlitch
6 жыл бұрын
You can do that as well, I just wanted to show the concept so people can apply where they feel it is necessary. In this example I feel the bass already has a lot of EQ processing, so I didn't want to overdo it and make it too dull, but you can certainly apply the theory in converse
@omerfaran8514
3 жыл бұрын
Thank you very much for the great tutorial. Just a question - how would you deal with the option of the bass being changed over the course of the track (and so the fundamental freq and so on would be changed as well) ? Would you still just treat with eq only the fundamental freq of the key? Thanks in advance
@lepureur4657
6 жыл бұрын
When I heard -12db etc does it mean you’re mixing at very low levels ?
@DashGlitch
6 жыл бұрын
Yes I like to leave plenty of headroom
@Channel15901
3 жыл бұрын
@@DashGlitch yea But what is the headroom Good for What i Learned (at SAE) is loudest chan. (For me Kick) -0.2 dB and everything else in the mix (Level as you want/as the Song Needs) Ok due to freq adding will you have to level the master down until your master signal peaks at max -0.2db. ! Does this make any probs ? Is that -12db rule just something you like to do or is there a reason for it. Like the -6db master for KZitem to avoid unwanted compression ? P.s. awesome channel , great work. keep it running !!!
@blitz8634
6 жыл бұрын
so, the peak of the kick + bass channel is -12dB? I usually put my kick on -12dB and my bass little bit lower, something like -10/-11dB, and the kick + bass bus channel peaking at -12dB. Is this correct or it may be too loud?
@DashGlitch
6 жыл бұрын
Well there is no "correct" way to mix levels, this is just my prefered method for the amount of headroom I prefer which is around -6db, but as long as the balance is achieved on the whole mix, the exact numbers are irrelevant - I hope that makes sense
@Brainlapse
6 жыл бұрын
tip: the kick should be your louder volume, followed by the bass
@blitz8634
6 жыл бұрын
thank you!!!
@MujjOMusic
4 жыл бұрын
Blitz Beats side chain can make bass cut through the mix with kick even if ur bass is louder then kick if u have enough strong side chain u can get bounce bass but the kick sound punchy and it will not lack energy make sure kick sound punchy then drop u have to do the side chain that way and give a space to bass in a kick
@Leoguerrero86
6 жыл бұрын
What about a little boost around 60 hz with a pultec emulation. Do you think is a good idea or maybe it turns into a muddy mix ?
@DashGlitch
6 жыл бұрын
Yup, but it all depends on the content, I think I actually have it loaded here, but I'm saving the explanation for a future video :)
@DashGlitch
6 жыл бұрын
but it seems like some of my viewers already know the secret sauce 😈 haha
@Leoguerrero86
6 жыл бұрын
hahahaha... Thanks Dash !!
@DashGlitch
6 жыл бұрын
P.s. when I use it I like to put it before the EQ, that way I can analyse the resulting frequencies, to make sure they're still not clashing with the kick etc :)
@Leoguerrero86
6 жыл бұрын
Dash Glitch I ll try it on that way. Thanks for the advice 😎
@OmaxFullOn
3 жыл бұрын
Kick and bassline bus LFUs should be ??? .... Kick lfus ? Bass Lfus ? Bus LFUs ?
@AlphaXZone.
6 жыл бұрын
*Punchis punchis punchis :'v*
@DashGlitch
6 жыл бұрын
It's all about the punch of the kick 👊👟
@kishork7319
4 жыл бұрын
This software?
@truthbetold2012
6 жыл бұрын
kick goes dunk bass goes da da dunk dada dunk dada dunk....can you do a tut on staying inspired in a world of automation?...psy seems is so same same these days I often wonder how it will sound in 2030....tough to be original now thankfully the drugs keep em grooving even trains sound good on eggs....rant over
@DashGlitch
6 жыл бұрын
Tip #1 to stay inspired: don't be so negative :)
@truthbetold2012
6 жыл бұрын
lol truth is considered negative more and more as we enter an era of socialism...sound design is great but the music is automated more n more same tune over and over and over what are your thoughts on music in the future with everyone learning to sound like everyone else?...the internet has more influence than people give it credit:)...stay positive and keep my integrity?...
@DashGlitch
6 жыл бұрын
I took a quick look at your channel and couldn't find any original content, what were you saying about originality? Something a wise man once told me, if you only have a hammer, every problem looks like a nail. If you have this perspective, I can understand why you are frustrated with the state of the scene. I have been there before, and guess what it took to change the way I felt, my mind set :) all the best
@hotzemusic
6 жыл бұрын
listen to other genres man. Techno, Tech trance, minimal, DnB, etc. And not just electronic music either. Metal, jazz, classical, prog rock. Immerse yourself in all things creative whether its music or not. It sounds cheesy, but if you keep an open mind you can find inspiration anywhere and learn that automation is just a tool to allow you to articulate that inspiration. If you're not satisfied with the state of whatever scene or scenes you're into, then be the disruption that the scene needs.
@truthbetold2012
6 жыл бұрын
bud I was listening to all those styles and djing from the early nineties I am a skate and create guy art, music,design,sound design photography, videography etc music is dead...automation will be the death of music... soul will disappear can you not see it?...look at the future see the truth automation is the death of creativity...but our tracks will be super polished and sausage loud!
Пікірлер: 51