In the first video I showed how to make a DIY open air mining frame to house your cryptocurrency mining hardware. In this video I show how I mounted the hardware on the frame I built.
Currently I have 7 GPU's mining in this rig. I am dual mining with Claymore's miner. I am doing abuot 211 towards Ethereum and 2100 towards Siacoin. This project has been very fun to do. I just hope the currency holds its value.
Correction in the video. I meant to say the power supply on the left powers the motherboard. Here is what each powers to help you do two power supplies.
Main PSU Powers: Motherboard, 7 PCIe risers (4 SATA Cables using 2 connections each and 1 Molex for the last PCIe rister), 3 Graphic Cards
Second PSU Powers: 4 Graphic Cards, SSD Drive, Contains a 24Pin jumper and requires manual turn on and off with switch on the back.
Here is a list of hardware I used:
Asus Prime z270 - A motherboard
Corsair Vengeance DDR4 8gigs ram
Intel i3-7100
EVGA 850watt GQ x 2 Power Supplies
7 PCIe risers
7 MSI GTX 1070 Gaming X graphics cards
ADATA 128gig SSD
M.2 PCIe Riser: www.amazon.com/dp/B0757525X2
SATA Powered PCIe Riser: www.amazon.com/dp/B07573TDRN
24Pin Dual PSU Cable: www.amazon.com/dp/B07575CW64
Facebook - / samreviewbyowner
Негізгі бет Cryptocurrency Open Air DIY 1 to 8 GPU Mining Rig Build Complete
Пікірлер: 20