We are extremely happy with the new custom bracket! For the M1000RR guys, here is the link to the kit to be able to upgrade your rear caliper: tinyurl.com/5ayumry6
@jonbeattie2609
Жыл бұрын
Why on earth, would you ‘need’ to upgrade the rear caliper - even the front Nissins for that matter? The Stock calipers even with the stock master cylinder has more performance on tap than most could master - Especially when all you guys do over there on these bikes is pulls down the highway.. lame af!
@QuarantaQuattro
Жыл бұрын
That bleeder valves can be use on stock brake lever ?
@ivanbarcialastra9847
9 ай бұрын
Front Caliper?
@ivanbarcialastra9847
9 ай бұрын
Link for front caliper, pelease? Best regards
@teerawutnuekchaiphum6887
Жыл бұрын
I am Fc from Thailand.🇹🇭 I like motorcyclein your channel. But I don't have money. Just watching your video makes me happy.🥰
@Motomillion
Жыл бұрын
You can do it!
@ruzbehmusic
Жыл бұрын
Props to Motomillion for collaborating with top notch designers are machinist to have these purpose built, customs parts made for us Motorcycle enthusiast! Keep it up!
@Motomillion
Жыл бұрын
Thank you!
@TheRoca2994
Жыл бұрын
Great up grade Motomillion Looking forward to it. I recently lost my 2023 M1000RR Due to a Nissin master cylinder failure. It was confirmed by BMW That something went wrong inside the master cylinder. As a result I’m getting a full motorcycle replacement since this mechanical failure on the brakes caused an accident and all carbon fairings and front end of the bike were damaged. “ just lucky to be alive “
@Motomillion
Жыл бұрын
Wow. Have not heard of this from anyone else. Happy to hear you are okay!
@myagoodbody7942
Жыл бұрын
I’ve been looking forward to this one 😉
@viktorskarlatov8227
Жыл бұрын
Just the master cylinder itself makes a huge difference on the street as well as on track.
@Motomillion
Жыл бұрын
It does for sure!
@LeeTillbury
Жыл бұрын
Brembos sure are the shizzle Mani❤
@Motomillion
Жыл бұрын
They sure are!
@Ed_gg
Жыл бұрын
I love this series
@Motomillion
Жыл бұрын
Thank you!
@tranphuongquy1305
Жыл бұрын
Beautiful my friend 😍!!!
@Motomillion
Жыл бұрын
Thank you! Cheers!
@christopherazarias9372
Жыл бұрын
Great video, and we'll explained 👍
@Motomillion
Жыл бұрын
Glad you liked it!
@prs26
Жыл бұрын
Best Upgrades
@Motomillion
Жыл бұрын
Thank you!
@MRR-qv3bw
Жыл бұрын
Hey Mani I need to purchase this bracket from you to install this setup on my 2022 M1000rr! I purchased these calipers from you a couple months after placing the down payment on my bike and had to get the Nissin calipers reinstalled after finding out the rear wouldn't bolt up. My mechanic put the idea in my head that if a bracket doesn't eventually come out then we could swap out the swing arm on my 2020 K67 to my K66 and then I just couldn't put the black swing arm on my K66! It might sound crazy but I really feel like the color change on my 22 k66 would mess up the entire look! THANK YOU FOR SOLVING A PROBLEM IVE HAD FOR OVER 2 YEARS, I JUST HOPE I CAN PURCHASE THE BRACKET!
@Motomillion
Жыл бұрын
The swingarms are the same, it is the wheels and chain adjuster blocks that are different. Thankfully the mechanic didnt make you buy a swingarm since it wouldnt have solved your problem. Send us an email regarding exactly how we can help you and reference this comment.
@bunkbmx2059
Жыл бұрын
Love how u are hands on your bike unlike jaret campisi he has dado to do all the dirty work 🤟♥️
@Motomillion
Жыл бұрын
I try
@Sharpedge3
Жыл бұрын
Super happy that you have the Brembo parts fitted. Any reason why you are using the 17 RCS over the 19 RCS master cylinder?
@Motomillion
Жыл бұрын
The calipers we used have 30mm pistons, 17mm master is the recommended one by Brembo.
@TheRoca2994
Жыл бұрын
Sadly I’m that 1 in a million cases, but I did a research and Nissin has recalls for master cylinders on many different bikes!!!
@Motomillion
Жыл бұрын
Second person to reply about the Nissin master cylinders.
@FlexFast
Жыл бұрын
This is 🔥
@Motomillion
Жыл бұрын
Thank you!
@guillermoquinonez8356
Жыл бұрын
Awesome
@Motomillion
Жыл бұрын
Thank you!
@Evo836
Жыл бұрын
Oh Yes! Nice.
@Motomillion
Жыл бұрын
Definitely Oh Yes! Especially when you squeeze that brake lever!
@quincyjackson8167
Жыл бұрын
Great video! Can’t wait for the full belly pan! I installed the carbon tank on mine and it looks amazing! I’m undecided if I want to put the decals back on it or leave them off. It looks amazing without them. When will the belly pan be instock?
@Motomillion
Жыл бұрын
Belly pan is already in stock. www.motomillion.com/collections/bmw-s1000rr-23/products/zmm-carbon-fiber-belly-pan-extension-for-bmw-m1000rr-k66-2023-2024?variant=40443980808258
@quincyjackson8167
Жыл бұрын
@@Motomillion thanks just ordered!
@alessandrodellacqua6831
Жыл бұрын
Great video as always! Just one thing: i’ve read that anti-seize drastically change the torque values of the bolts, so when installing Proti caliper bolts do you apply the same torque as per service manual or do you adjust it? Thank you!
@Motomillion
Жыл бұрын
Same torque values.
@alessandrodellacqua6831
Жыл бұрын
Got it! Thanks again
@VishalSingh-lv1zl
Жыл бұрын
Mani bro legend ❤ love from India
@Motomillion
Жыл бұрын
Thank you!
@matheusrgomes
Жыл бұрын
When are you installing a V4 engine in it, Ohlin's & MoTec ECU
@Motomillion
Жыл бұрын
Got the SP2 for that.
@Mikej345h
Жыл бұрын
We would like to see this bike in action. For example, you went ride the bike after installing the brakes. Well do a video of you going ride the bike with new brakes. Looking great though.
@Motomillion
Жыл бұрын
Check out the video coming out tomorrow. You will like it.
@jasperpearce8316
Жыл бұрын
Amazing. Criminal this never came with brembos from factory. Safe to say i now have a xmas shopping list😂
@Motomillion
Жыл бұрын
Happy to see others think the same way as we do!
@IlovemySubaru
Жыл бұрын
Mani why does BMW not have single side swing arm? You would think that BMW would have that on the bike.
@Motomillion
Жыл бұрын
Probably less complicated and a dual sided swingarm gives better flex characteristics.
@vishnuiyer_
Жыл бұрын
do GP4 MS gives more stopping power compared to stylema calipers?
@Motomillion
Жыл бұрын
More stopping power in terms of being able to squeeze the caliper in a more consistent and stronger manner.
@Terank786
Жыл бұрын
Love frm 🇮🇳🇮🇳❤
@kennethengstrom9261
Жыл бұрын
Nice🤩👌
@Motomillion
Жыл бұрын
Thank you!
@IakovosSianoudis
Жыл бұрын
Are those the 14mm or the 16mm Stahlbus bleeding valves??
@Motomillion
Жыл бұрын
For what part?
@IakovosSianoudis
Жыл бұрын
@@MotomillionFor the corsa Corta
@hby7768
Жыл бұрын
what is recommended for track spec bremebos on the M1000RR?
@Motomillion
Жыл бұрын
Stylema is probably the best bang for the buck.
@BeginnerBikeLife
Жыл бұрын
Le sigh, can't afford a M, but I love my CBR1000RR..
@jay0113C
Жыл бұрын
CFMoto 450 comes with brembo! A $6,000 usd bike but this bike that cost more than some cars does it that’s crazy!!!!
@Motomillion
Жыл бұрын
Exactly!
@QuarantaQuattro
Жыл бұрын
Many where can I buy that orange thing that u put on the sprocket
@Motomillion
Жыл бұрын
Amazon should have them, it is called Cross-Check Torque Mark.
@QuarantaQuattro
Жыл бұрын
@@Motomillion thanks 🙏
@QuarantaQuattro
Жыл бұрын
This bikes should’ve come with brembos? Are those stock calipers brembo ?
@Motomillion
Жыл бұрын
The stock calipers are Nissin.
@QuarantaQuattro
Жыл бұрын
@@Motomillion but o the k67 rear are brembo right ?
@ehiggins7476
Жыл бұрын
Why? This bikes get tested by the factory riders at the limit, and the bikes perform to BMW standards. The stock brakes are more than enough for the majority of riders that buy this bike. Unless you’re a highly skilled rider pushing this bike beyond it’s limits or just like the look and prestige of the Italian brand which is totally fine too.
@QuarantaQuattro
Жыл бұрын
@@ehiggins7476 I think if the bike wouldn’t brake enough it wouldn’t need abs
@clearskies8098
Жыл бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@andysart8147
Жыл бұрын
it 's a ducati now ...😃
@Motomillion
Жыл бұрын
Far from it.
@MOESULL911
Жыл бұрын
I like the carbonfiber downforcers, but it’s a bit of an overkill for the streets
@Motomillion
Жыл бұрын
Isn’t any modern superbike overkill for the streets?
@kowalski2334
Жыл бұрын
The blue oem calipers really do look a little tacky, those Brembos look ten times better. I like your attention to detail mani, I am the same. 😂
@Motomillion
Жыл бұрын
Glad you like them!
@thabotsotetsi3191
Жыл бұрын
😢😢..Why not make it a special build and let Christina build it.. 😂
@Motomillion
Жыл бұрын
Jaret needs to address this.
@mboksurajiyem-px9tx
Жыл бұрын
I am from Indonesia
@K-carbon
Жыл бұрын
So what 💁♂️
@Motomillion
Жыл бұрын
Hello Indonesia!
@mboksurajiyem-px9tx
Жыл бұрын
hello mister, please review the Yamaha R1M again, it's not detailed enough. I want to buy a motorbike like that, its advantages and disadvantages. Thank you.
@Motomillion
Жыл бұрын
Noted
@TheUnKnown0019
Жыл бұрын
Want to sell the m calipers lol
@Motomillion
Жыл бұрын
Already sold.
@O8l1v1ous
Жыл бұрын
It’s crazy that a 33+k bike doesn’t come with brembos
@farmind6582
Жыл бұрын
Even worse it comes with Marzocchi forks!
@Motomillion
Жыл бұрын
We have said this many times. It is 38+k Here in usa
@Motomillion
Жыл бұрын
We will be adding Ohlins forks shortly!
@farmind6582
Жыл бұрын
@@Motomillion do you like the look of the bike? To me when you see it against the Pani or anything else its so wide it looks Like an ugly sport’s tourer!
@ehiggins7476
Жыл бұрын
Are the M spec brakes not powerful enough? Or is it a prestige thing?
@peterelder1362
Жыл бұрын
Alot of wast of money.
@Motomillion
Жыл бұрын
Just like the bandwidth you used to leave this comment
@johnsnow2022
Жыл бұрын
All these expensive upgrades for a bike that will only do speed runs and wheelies on public roads.
@Motomillion
Жыл бұрын
You are confusing this channel with another one probably. Definitely no wheelies or speed runs on public roads.
Пікірлер: 106