My recontoured mag release is back from refinishing. I ran my P10C and new CZC mag extensions at Sage Dynamics Defense in the Home. Also picked up a Sirt pistol.
Glad I found your channel. I'm enjoying your content.
@stevenleflar5152
6 жыл бұрын
Dude these are great videos. Nobody has videos on this gun that are this in depth, thank you!
@lumpvision5746
6 жыл бұрын
your videos are awesome man. a lot of really good detailed information.
@LeonardMichaelis
6 жыл бұрын
Your CZ P10c videos are fantastic. Thank you so much for making them and sharing the knowledge. I just got a CZ P10c and have all kinds of questions (e.g. heavy mag release button for right thumb, and extremely heavy for the left thumb, etc.)
@earlan2569
6 жыл бұрын
The "V" in the mag release button is probably rougher on one side. Once the black oxide coating wears in that area it should even out. Just work the mag release while watching a movie.
@slamfire5382
6 жыл бұрын
Excellent
@cano1732
6 жыл бұрын
I was able to get +4 on my czcustoms extension base.
@oklahomaterritory9539
6 жыл бұрын
Who did the stipple work on your CZ? Gun looks awesome!
@earlan2569
6 жыл бұрын
I used an OT Defense kit. kzitem.info/news/bejne/yZhvmKytfpqDmG0
@nachonad
6 жыл бұрын
Loving your vids! In one of you videos you mentioned something about Cajun Gun Works possibly working on stuff for the P10c. What information do you have on this? I would be very interested in this gun if they got into the P10c market outside of just providing sights.
@earlan2569
6 жыл бұрын
CGW posted in their CZ forum section. Late November is the latest estimate. www.czfirearms.us/index.php?topic=89409.75
@hobbez84
6 жыл бұрын
Great videos as always. Based on your videos, I decided to send off my P10C slide to Jagerwerks for a RMR cut. Would you mind sharing your thoughts on the iron sight heights?
@earlan2569
6 жыл бұрын
Jagerwerks cut my P10s RMR pockets .185” deep. Glock rear sight dovetails are ~.080” deep. The RMR body is ~.350” tall. So on a P10C, a .245” tall rear sight (including the dovetail) would be about flush with but hidden by with the RMR body. Most rear sight notches are .100” deep. So a .345” tall rear would be the lowest height that gives a full rear notch. Also, a sealing plate is .100” thick and raises the RMR by that amount. So Ameriglo GL-408 (.360” tall) with an RMR sealing plate leaves .105” of rear sight notch visible. I run a .245" tall front from Dawson Precision. My POI at 25 yards is about 2" high. A .260" tall front would give me a perfect zero with my dot but they weren't in stock and I find this acceptable considering they are backup sights. This is all based on someone running irons forward of the RMR. Here's a great explanation of why I prefer it that way: kzitem.info/news/bejne/26io0qx7sIeShYI
@oklahomaterritory9539
6 жыл бұрын
How much does it cost to have rmr cuts done? Do you know how much it will cost to redo the irons as well?
@maxhayward2127
6 жыл бұрын
Enjoy your videos and I'm giving you a sub! With some of the issues you have had with your P10c, is it a gun you would personally feel confident in carrying? Thanks brother!
@earlan2569
6 жыл бұрын
I've been carrying it for the past few months.
@maxhayward2127
6 жыл бұрын
Earl An thanks for the reply. Glad I subbed you
@Bobby83SWMP
6 жыл бұрын
Hey, I was wondering if you could do a video of what IWB holster you would recommend for a p10c with an rmr on it? I’ve been searching for a good one but can’t decide on what to get. I just got a p10c and I’m going to be sending my slide to jagerwerks soon. This will be my daily carry so I am searching for a good holster for it. Thanks.
@earlan2569
6 жыл бұрын
I run an Armordillo Concealment Lux but I carry with a weapon light in the appendix position. Otherwise I've been happy with CJP Custom Concealment and TR Holsters.
@adamlichman1181
6 жыл бұрын
What holster do you run for your p10c with the TLR 1 HL? I have the same set up and can't find an owb tactical holster.
Thanks for your videos on training. What trigger do you have on your glock?
@earlan2569
6 жыл бұрын
Agency. It's my fave followed by Overwatch and Apex.
@LilYeshua
6 жыл бұрын
Earl An Thanks. It looks like a mod that Tire Iron did on his Glock. kzitem.info/news/bejne/06CKmH2lcoeQfWk
@karlarndt9348
6 жыл бұрын
Earl, Karl here. Would it be possible to refit the magazine release spring with a lighter or softer spring?
@earlan2569
6 жыл бұрын
I tried a Glock Striker Block spring a while ago. A little big but it fits. Drops the pressure by about half. It was too light for me though. I accidentally dropped the mag a few times while shooting. Video here: kzitem.info/news/bejne/uJyYnaFjZoqDa2U
@RockyMountainBear
6 жыл бұрын
Good video. Thanks for the info. What holster were you running with the light on it? I just ordered the safariland als for glock with tlr1. I'm going to return my apl and get the surefire
@earlan2569
6 жыл бұрын
Armordillo Concealment Lux
@RockyMountainBear
6 жыл бұрын
Earl An Thanks! I'll have to check that out. Your vids have helped the most with my CZ. I just got back from the range after adding a nice sandpaper grip and a stainless steel super black guide rod with a 15lbs recoil spring from Gray Guns Industries. She shoots like a dream now! Just wanted to say thanks for everything, in case KZitem screws your channel out of existence too. Oh, and I meant streamlight, not surefire in my previous comment.
@LeonardMichaelis
6 жыл бұрын
Who did the slide top serration in continuation of the existing ones ?
@earlan2569
6 жыл бұрын
Jagerwerks
@Codyfarmer
6 жыл бұрын
what kind of troubles wasn't having? And is it a pretty good gun as of today?
@earlan2569
6 жыл бұрын
It's been running great. No issues in the last 5 months.
@kurtpittsenbargar6956
6 жыл бұрын
Do you know if there is a way to mod the standard P10 magazine from 15 to 20 rounds? Great vids!
@earlan2569
6 жыл бұрын
I think the Springer Precision P07 140mm basepad with a Grams follower and spring will add 5-6 rounds.
@kurtpittsenbargar6956
6 жыл бұрын
Earl An thanks!
@renosnutzz8592
6 жыл бұрын
Can you please post a link to this extension I can’t find the right one ?
Пікірлер: 42