Thank you for making these videos I have to rebuild my z24 engine
@truslyd
2 жыл бұрын
This is great..this is really gonna help me when I swing the engine to replace the rear seal...great work bro.
@samwhite1345
Жыл бұрын
It's a pain to get to the transmission bolts unless you pull it out as an assembly
@guy858
2 жыл бұрын
a friend sent this to me... sorry I didn't give you the oil pan, but you got the truck with NO engine... yup, the pans are different... glad you used the header though....
@DEMOGarage
4 жыл бұрын
I was waiting for the bread technique on that crank bushing. Never seen that before you. Sorry about the troubles.
@Jerod_Helt
4 жыл бұрын
Stephen DeMocko that bushing was so thin I didn’t think it would work. Thanks for the comment 👍
@lowwsgarage8172
3 жыл бұрын
Dang man I was hoping you had sort of detailed instructions on the valve adjustment segment. I have got to do that to mine.
@Inherit_Drums
2 жыл бұрын
I swear my Z24 In my 89/90 D21 is the exact same as a 720 despite everyone saying it's not. As far as I know it's never had an engine swap, but it looks like the older 720 version
@Damnsun720
10 ай бұрын
Hey boss this is kind of late but the difference between the two is that the one in the hardbody is a Z24I. The regular Z24 is carburated meanwhile Z24I was fuel injected. (Throttle Body Fuel Injection). Some of the last 720's came with the Z24i but depending on what model/trim you got
@mymadness299
3 жыл бұрын
Hey Brother , don't forget you need the 4x4 oil pick-up tube as well AS the Pan as the 4x4 pan is deeper and further away , I just ran into the same problem as I watched your video for help LoL 😜🙈 unfortunately
@retro720overlander7
4 жыл бұрын
Well that’s anticlimactic 🤦🏻♂️😂 I have three 4x4 720’s with one spare motor out of another 4x4 that I’m getting ready to rebuild for my Bushmaster. The one that’s in it is toast, I’ll rebuild it later and hold onto it if I blow one. Can’t wait to see yours run👊🏻
@Jerod_Helt
4 жыл бұрын
Don Peterson it should run soon🤞
@vayabroder729
4 жыл бұрын
Wow; that sucks! A little setback but maybe with a different oil pan you should be set. Everything else looking great!
@solomonrammutla1209
Жыл бұрын
I think it would be great if u explain step by step what u r doing.
@Jerod_Helt
Жыл бұрын
I’ve started doing that in my newer videos
@jakeb.5489
Жыл бұрын
Did you use any sealant on the engine rear plate? If so what kind? Thanks.
@joshuahsublett8482
4 жыл бұрын
Oh man I would be livid. That sucks
@JLin576
4 жыл бұрын
Ugh, that is bummer. It always seems like two steps forward and three steps back sometimes with these jobs.
@AckwellKayumba
Жыл бұрын
Filagega number to use for setting tampent
@mitchlanier884
4 жыл бұрын
Sorry! to see you are having such a problem with the Nissan's motor. I know you waited a long time for it. I have faith you will figure something out, due to your confidence and competence in your abilities. Good luck with the rest of your builds.
@Jerod_Helt
4 жыл бұрын
Thanks buddy
@marcelomaciel6756
4 жыл бұрын
Oh man! Disappointing.... well, better for us viewers... at least another episode will come. cheers
@КалыванКалыванов-э9к
29 күн бұрын
Привет.Какие зазоры выставлял щупом на клапанах?Впуск и выпуск.
@Jerod_Helt
26 күн бұрын
I don’t remember, but you can do a google search, thats what I usually do.
@КалыванКалыванов-э9к
25 күн бұрын
@@Jerod_Helt Спасибо за информацию.Я нашел информацию.Два разных параметра.Буду пробовать выставлять зазоры.
@dennislane4140
3 жыл бұрын
Whys your block red mines blue
@Jerod_Helt
3 жыл бұрын
Someone painted it before I got it
@Dark_Knight_USA
3 жыл бұрын
Wrong oil pan. That oil pan is 2wd. When I 1st saw the pan I figured the truck was 2wd. Then I saw the grill. I'm thinking Hmmmmm. I must have did something wrong. I had 31in tires. I did my engine and didn't need 2 pull them off... or the hood. Oh well. He sure is quick w/ that ratchet.
@renzobelmonte4761
4 жыл бұрын
Thats a nice front bumper. Where did you get it?
@Jerod_Helt
4 жыл бұрын
It came with the truck
@Dark_Knight_USA
3 жыл бұрын
That is a OEM bumper. It just has a nerf bar on it.
@fractalrender
4 жыл бұрын
Fu.... you know, I imagine you have already meassured everithing, change the oil pan or make a cut away to the one you have, dont you have the original one?. Or was it diesel??
@Jerod_Helt
4 жыл бұрын
juan rossi I’m working on getting the correct oil pan. I bought the truck without an engine, so I don’t have the original pan. I have to have the correct engine and all original components to get it to pass smog here in CA. So it’s been a struggle to find the correct parts. But I’m getting close👍
@fractalrender
4 жыл бұрын
JNH Classics i didnt know what a bummer to pull it out again good luck whith the pan!!
Пікірлер: 34