I'm not a DCS ace but i can give you maybe a couple of advice: - focus on correctly aligning with the runway, which is 9 degrees off left respect to the carrier course: sometime you align better, but some landings are totally misaligned. It is important: you risk to crash on other planes otherwise! - practice on managing the throttle: you can't keep a fixed configuration, there isn't a magic position, you should continuously calibrate it by applying moderate corrections. learn to anticipate the plane's vertical movements - use the TACAN course and the HSI for helping with the traffic circuit: you can discover the carrier heading with the F10 map by clicking on the carrier icon - after you trim the plane for being on-speed with the AOA, during the glide you can still help the plane keeping the glide path appling small inputs on the stick Y-axis, but be careful to always remaining between the E-bracket, otherwise you have big chances to not hooking the wire - watch some more tutorial on YT! :D have fun!
@Simenthusiast
3 жыл бұрын
Thanks for the tips! I've been practicing more since I recorded this. I started using the TACAN on HSI to better align, but I can honestly say it's still pretty hard to align on the runway. I'm going to take your tips, and continue to learn from others, and post a follow up video when I HOPEFULLY make some progress.
@NBATIPS
3 жыл бұрын
Your a Boss Great Job
@Simenthusiast
2 жыл бұрын
thank yoU!
@AliBaba-vw7mo
3 жыл бұрын
You still using your Gladiator NXT?
@Simenthusiast
3 жыл бұрын
Hi Ali, yes I’m still using it. What are you using?
@AliBaba-vw7mo
3 жыл бұрын
@@Simenthusiast still crying with my Logitech Extreme 3D Pro
@Simenthusiast
3 жыл бұрын
@@AliBaba-vw7mo it's a good starting point! i loved my first logitech extreme 3d!
@AliBaba-vw7mo
3 жыл бұрын
@@Simenthusiast mine has a crap ton of problems though... The sensor is all over the place.
@Simenthusiast
3 жыл бұрын
@@AliBaba-vw7mo thats a good point, not going to lie, my main problem with my x52 pro was the jitters in the axis.
@AliBaba-vw7mo
3 жыл бұрын
The fully landing configured turn is very hard to pull off.
@Simenthusiast
3 жыл бұрын
it really is, gotta keep the speed up and but also, not go too fast near the end of the turn or else you'll balloon upwards.
@AliBaba-vw7mo
3 жыл бұрын
@@Simenthusiast hard to keep that perfect AoA during turn
@daniellebduska9972
3 жыл бұрын
try to ILS :-)
@Simenthusiast
3 жыл бұрын
Daniel, I’ve been practicing using tacan, ILS, and coming in at the correct glide slope. Hopefully I’ll have a follow up video soon.
Пікірлер: 19