Not even finish watching the video i can put them all back together saving lot of time .Thank you!
@boobuucallado
3 жыл бұрын
Thank you for explaining how to put it back together, novice here decided to take it apart not knowing you can clean in the plastic housing. Thanks again!
@mistifeyed
4 жыл бұрын
I had watched like 10 different videos on how to clean the filters and THANKFULLY found this one! This was by FAR the most helpful video on how to put these filters back together. I was ready to give up but it was a breeze after watching this! THANK YOU!
@bmm7132
2 жыл бұрын
I agree 👍
@amysalvador4460
Жыл бұрын
Thanks for the tips. We clean our filter today and it was a success. ❤
@darylre7935
2 жыл бұрын
Backwashing should be done prior to starting the procedure. This will help to remove some (hopefully most) of the DE prior to starting. The one grid was not properly locked in place, it was away from his sight of view but obvious on the camera side. These filters are a pain to work on and more time consuming than the 4 in one. Nice video overall, got my thumbs up.
@michaelchenevert3363
4 жыл бұрын
Thank you posting this video. The information is very helpful.
@joescholz5168
3 жыл бұрын
This needs to be louder. My volume is on high and hard to hear ...
@lapnguyen3369
3 жыл бұрын
You missing the part turn off the pressure in the beginning of video 🤔is that not important?
@pirimid9
2 жыл бұрын
I have a question for you. I have the same DE filter I'm trying to find replacement filters there's two different types. one is wider and then one is shorter The wider one is model number fg-1005. I don't know what is the model # for the shorter one. In your video at the 3 min 34 sec mark you place the larger one back- then the last one is not as wide at the 3 min 40 second mark you place the smaller one. I wonder what that part number is? Would you know. Thanks
@mickinirvine
2 жыл бұрын
at what point in this process do you backwash? Or do you? I'm so confused by how that plays into this process.
@nickh3809
3 жыл бұрын
Why are you whispering, im watching on my phone i dont have a Home Theater sound system to hear you on at the moment 😂 Good vid tho
@elainejeremy8484
4 жыл бұрын
What is the name of your company? I live in San Diego.
@universaldonor3100
Жыл бұрын
My techs don't use lube on the oring.....just clean it well and put it on...but, if you are gonna use lube...use the Red Magic Lube!!!!
@roller9158
7 күн бұрын
Why are you grids flat when you open your filter? When I opened my filter, the grids were filled with water and I couldn't pull the whole unit out, since the grids were bloated.
@TheHcharpe1231
4 күн бұрын
Sounds like your grids need replacing asap. These grids away have a curve shape, whether under pressure or not
@kaypea4874
4 жыл бұрын
you missed 2 of the filters......
@thepoolposse2409
4 жыл бұрын
I never miss anything
@ashwinkamath57
4 жыл бұрын
@@thepoolposse2409 2 of the filter grids are not held under the manifold (at 5:13 mark in video)
@mattc.310
3 жыл бұрын
I was wondering the same thing. Still out when the filters were installed in the case at 6:32. Would that make any difference in operation or is it cool if a couple won't go in? Good demo on how the filters line up with the circles on the bottom grate. I'm getting ready to put mine together and it looks easier now. Thanks for the video.
@deependfrank
Жыл бұрын
lol, don't want to be weird. What about us guys that can't help it?
Пікірлер: 22