Thanks for the vid. It was really easy. The paper clip hook is the key.
@henrylong45
5 жыл бұрын
Please, please, please STOP WHISPERING!!!
@sandeepphul
7 жыл бұрын
Perfect, thank you for making this video. All sorted now!
@SHK188
9 жыл бұрын
If your key is not working or functioning properly, you need to visit dealership, unfortunately there is no way around that due to security restrictions.
@ZionistJewTube1
7 жыл бұрын
I took it to an electrician, because water got into it from heavy rain. The key now has a signal but still doesn't open the doors nor turns the engine on.
@seneca65r
8 жыл бұрын
Thanks
@lindsayfoyle2295
4 жыл бұрын
Took me longer to find the paper clip than replace the key fob. Many thanks for the video.
@7777777sportbilly
6 жыл бұрын
Thanks for posting this excellent video. I have been pondering how to get the internal board out on the key for the last 1/2 hour without busting it. After watching this, had it done in 1 minute. A precise, too the point, no messing around video. Thanks a bunch....................
@michaelmcmillan9064
9 жыл бұрын
Just received my key fob blank from Ebay and changed it out in 5 minutes. Thanks.
@MikayilAbdullayev
9 жыл бұрын
Man, thank you for that. I don't know why Mercedes makes most of its parts so counterintuitive to disassemble.
@Cortez77fr
9 жыл бұрын
Probably for selling new complete keys at high price :/
@spencerpalmer15
9 жыл бұрын
this video saved me 300 dollars.
@SHK188
9 жыл бұрын
That's awesome
@mk5717
3 жыл бұрын
Yesterday I fixed my key along your video. Thank you very much.
@dneal9835
8 жыл бұрын
Thank you for this video. I was successful at removing the key fob chip and replacing it into my newly ordered key fob. I paid $17.00 for two replacement key fobs and now have one to spare. All the Best!
@janetshields605
10 жыл бұрын
Thanks, my lock button stopped working, pulled the chip out to find the push button had broken off, soldered it back together and hey presto a working key!
@DellAnderson
8 жыл бұрын
Thanks for this video. Hint: If your key starts the car but remote light doesn't work even after changing batteries, try giving the spring-loaded battery clip a bit of an extra bend (but don't break it!). Apparently they sometimes lose their spring and poor contact prevents batteries from working. Your video and checking the obscene price of replacement keys inspired me to investigate. Was going to remove chip but fixing the short battery retaining clip was all that was needed. Thanks again!
@vbiruk
Жыл бұрын
most idiotic key is VITO 111.Not all german is good.Chip is not reliable. Manually open doors is difficult.
@RadzaLT
4 жыл бұрын
Just broke the key buton🤬🙈realised you dont need to put wire inside between white plastic, you can do from outside white plastic. If you put light all way down, you can see small hole where you can catch with wire under chip and pull out safely
@MunchyKrunch
4 күн бұрын
Does it work without the casing by chance? I'm wanting to put it in a custom project to see how thin of a card I can build it into so it's more convenient to carry
@Huff238
9 жыл бұрын
Worked perfect...saved me from tearing my old fob apart...thanks
@informediatech-bruno5766
3 жыл бұрын
omg you just need tweezers and 30 seconds to open it? I TAKE MAIL IN REPAIRS WORLDWIDE dont pay mercedes 500 bucks, microsoldering and board repairs on mercedes key fobs
@BudderGamingMCYT
8 жыл бұрын
Thanks for sharing! You saved me $800 to replace both of my keys. THANK YOU!
@elijahfrendberg4952
5 жыл бұрын
Great video! Worked first time and no damage done to the circuit board or fob
@konstantinosoriginalistas
4 жыл бұрын
Thank you for the great video, man! Very useful, it helped me a lot 🤙
@vladito80
8 ай бұрын
Ive done all that.. the buttons work, lock and unlock but when i put the key in the car, it doesnt recognise the key and wont do anything, while the other key unlocks the steeringwheel and can turn on the car.. what have i done wrong?
@georgi2502
10 жыл бұрын
Thanks a lot bro, I had a key fob replacement for months but didn't replace it because I was afraid that I will damage the key chips. After I looked at your video I did it in 10min. Thanks a bunch!!
@SHK188
10 жыл бұрын
No problem, I had the same fear.
@Mr082645
9 жыл бұрын
Hey Shams, Good job on that info/video about changing guts of MCB ignition/key/alarm fob. It worked so easy I thought I had done it wrong... Thumbs up! Thanks, Sonny
@SHK188
9 жыл бұрын
D Rey Im glad it helped, thanks for the thumbs up!
@habanadg
7 жыл бұрын
My key got wet and was not working, this video instruction hrlped tremendously and now its all good. Tganks
@SHK188
7 жыл бұрын
im glad man!
@adolfochapa8187
7 жыл бұрын
David Habana Funny comment about the national secrets. But that is how MB treats their stuff. Top secret. 🙊
@jonathanvance6873
8 жыл бұрын
Sound quality was a bit off. I thought he was giving national secrets out the way he talked the entire time.
@keithslloyd
7 жыл бұрын
I couldnt understand him at all
@EstNineteen90
7 жыл бұрын
Jonathan Vance 🤣🤣🤣
@7777777sportbilly
6 жыл бұрын
You couldn't understand him!!! Do you guys speak English. I heard him just fine. Im not interested in listening to some shouty crazy arse for 5 minutes before you realise the bloke knows less than you. This video is the best HOW To I've seen in a while and helped me out perfectly
@ericlindsey8100
Жыл бұрын
Maaannnnn!!! I sure appreciate this video!! 👍🏿👍🏿👍🏿
@salk9259
9 ай бұрын
Thanks … my old key was unable to turn ignition and the new one fixed the issue…
@raphang6390
10 жыл бұрын
Dude very much you just saved me a fortune! Excellent process took me 5 mins to swap the inside of my key with a newer key fob i had from another car.. Much praise..
@alanhulme5770
8 жыл бұрын
Mate you really went the hard way around with this, if you look closely you will see a small gap in between the plastic lock bar and the circuit board, insert the curved tip of a nail file into that gap and twist it. it will release one of the locating studs and allow you to rotate the lock bar around and easily remove the circuit board with no effort at all. I replaced one of the switches on mine also and now it works just like a new one. your video put me on the path though so thank you very much. I thought you might appreciate the extra info
@larrysingleton8076
7 жыл бұрын
Alan Hulme s
@alexanderstoyanov2554
9 жыл бұрын
I changed the key case, but the lock and unlock buttons doesn't work. I can ignite the car and drive but the other thing is a problem.
@erhaus
9 жыл бұрын
Hi Shams Alkari, what if the electric part of the key is damaged? I replaced the batteries and it still didn't work :( the red light came on though. Have i don't something wrong..pls advice Cheers
@alexanderwoods2055
3 жыл бұрын
Just did this! I'm happy with the result. It definitely was difficult.
@adamm784
10 жыл бұрын
Thank you so much! I dropped my key fob and it cracked the plastic on top the lock button now the car won't lock due to the crack. I bought a key fob from eBay and will follow your method. I hope the one I got from eBay looks just like the official one I have. I want to keep the logo. Thank you!
@civotbree4900
8 жыл бұрын
YES i broke one small white plastic peace :P but its working be gentlel when removing white plastic !!!!
@MrHugoeires
10 жыл бұрын
Excelent! I broke a little bit of white plastic, but still works nice :) Thank you!
@CFHottinger3
4 жыл бұрын
Absolutely the best way to replace the electronic chip/board into another new key fop that will save you potentially hundreds of dollars. Nicely done by Shams Alkari
@taransarao6637
4 жыл бұрын
Wher can I buy a blank chip for w203 ?
@unknownsamoan01
4 жыл бұрын
Good question.. I need to purchase the fob chip as well.. help anyone?
@emmanuelrodriguez2538
Жыл бұрын
Did you figure out how to get it to start lovking and unlocking again
@2711arifm
9 жыл бұрын
Fantastic. Bit tricky but worked. Just ordered a new fob. Use the spare for now.
@barrielennox-gordon7111
7 жыл бұрын
Have managed to do this with ease, an excellent video, many thanks. Barrie C Class
@Cortez77fr
9 жыл бұрын
With your help i've changed the case in 2 minuts. Thanks !
@saiko_1
6 ай бұрын
It helped. Thank you very much!
@endaf
3 жыл бұрын
7 years old, but still useful, thanks
@bradlyford3834
2 ай бұрын
The most Canadian thing I have ever seen. Explaining how to fix it in reverse. Worked tho.
@ustokos48
4 жыл бұрын
Hi.. I have a C200 w202 car and one of my fob stopped communicating with the EIS, I guess. So I use the spare fob, hoping that someone can tell me, how to fix it. Do you have an idea?
@bodyofhealth3351
6 жыл бұрын
Atlanta georgia locksmith (lost key) 7708993687. If i can't do it none can. mobile locksmith
@KozKreoleKwenKomedi
6 жыл бұрын
YES YES YES Thanks man
@markbush7333
9 жыл бұрын
Ok, I switched out the old fob casing with a new one, put it back together. It works only partially. It locks and unlocked the doors put won't turn in the ignition to start the car. So, I then put the chip and battery back in the old casing. Same thing. It locks/unlocks the doors, but won't turn in the ignition. What gives? Is there a secret here. I really don't understand why the old unit which always worked now won't just because I took it apart and out it back together. I didn't damage the chip. Please help. (Car is a 2002 C240). Thanks!
@orvalsi
7 жыл бұрын
Never ever do this!!!!! The bent wire used to pull the board out blew out a little chip on the board and ruined it!!!..$500 for a new FOB at the dealership. I managed to remove the board from the case by simply pulling it out with needle nose pliers, but too late, the board was already ruined. Do as Alan says, and it will come out...NEVER POKE INSIDE WITH THE WIRE CLIP!!!
@legreco7834
4 жыл бұрын
You’re amazing bro thank you
@pieterkleynhans
Жыл бұрын
Cant get the white cover out plz help
@outsidebin3702
Жыл бұрын
learn to talk less and get to the point
@wasimbashir9317
6 жыл бұрын
I want to change the black key to the chrome One but dont know of IT would Fit, please answer😊 the dealer wants 700-800+ labour
@TinaTussey
6 жыл бұрын
Where can I find a replacement key for a 1998 E 320? ( Not the fob, but the complete replacement key )? Please! Anyone with information regarding this issue contact me!
@manj1699
10 жыл бұрын
Thanks video helped me out!!!!
@nadamejazenterprisenadam
8 жыл бұрын
this is fine if the buttons are not spoilt..i find cutting less risky coz most of my customers remote button are cracked and when they crack the purple plastic below the button stucks with the pcb and cant pull the board even when the white plastic already out......slowly cutting the fob from top with sharp cutter is safer coz most of customers gonna throw away the old fob anyway.
@ShoopkoTubePranks
6 жыл бұрын
Hello, an awewsome tutorial, but I just wonder where did you order, or from which supplier did you order the replacement case, because I've found many of the 2 button cases but not any of them has the Mercedes-Benz logo in the back. Can you please provide the link for us it'd be awesome! Thank you!
@rafi6666g
5 жыл бұрын
DID U EVER HAD A PROBLEM after when u CHANGE BATTERY THEN AFTER DOESN'T WORK IN YOUR IGNITION?
@syedbokhari4279
5 жыл бұрын
If you were not fully prepared to demonstrate us, why waisting precious time of ours and yours mate?
@SHK188
5 жыл бұрын
If you don't know how to use KZitem, why even comment bro? Here's a tip, skip to your favorite part!... Thank me later 👍
@nickking8103
10 жыл бұрын
pls i drive a 2003 mercedes benz G55 AMG and my key remote can only unlock the doors but can not lock it? what do i do?
@2melvyn
3 жыл бұрын
Thank you for the video especially for the paper clip key. The battery replacement would not fix the fob, but after taking out the circuit board and spraying it, and the internal fob housing, with QD Electronic spray Cleaner, the key fob light began working, and so did the key controls on the car. I can only assume crud build-up on the board and in the fob, from 2005 to 2021 was causing the problem? Perhaps, after taking out the battery, just spraying the internals without taking out the circuit board could have also worked?
@brittanychadgale5870
6 жыл бұрын
Let 99 Mercedes key problem haven't got a transponder chip k your will not run need help bad
@alanbellwood3902
2 жыл бұрын
Works just as well placing the paperclip into the little slot Merc put in for this purpose and springing thr clip in the same way.
@Keviekev115
3 жыл бұрын
This having a million views shows how many people go through this problem lol
@paredeshfco
2 жыл бұрын
thanks my keyfob works now!
@UBlink71
3 жыл бұрын
Hey, This was a great video. It worked perfectly! It probably took me longer to find a paper clip LOL. Thanks for the vid!
@MarcJRobinson
Жыл бұрын
Paper clip was the perfect hack. THANKS!
@Allisbuttoys
2 жыл бұрын
Very good video. Have followed instructions and completed the changeover twice without any problem.
@santodimotocicli6240
2 жыл бұрын
I was struggling with changing my case until I found this video. The paperclip trick worked beautifully. Thank you!
@SnoperMZ
8 жыл бұрын
hey all, The best guide that I have checked out was on Volt daddy (i found it on google) Probably the most detailed info on batteries and this kind of things that i have found.
@budicahyadi6506
6 жыл бұрын
thank you so much.... almost i call towing company go to dealer mercy, but your video give life !!! i just take the part, and put back again, and press the key, red light coming up.. !!! thank you i can frive now !!
@danielgyamfi4099
7 жыл бұрын
Hi, Am having problem with Benz C180 1998 Model . At times it will start the engine alright sometime very difficult . what is the problem now Thanks
@TheEtronx
9 күн бұрын
Thx my guy 👏
@wasimshabir1074
7 жыл бұрын
great be very carefull when puttin paperclip in to pull white plastic as i broke my button
@chrisdaviesguitar
6 жыл бұрын
what do so many people talk utter shite for ages before actually getting won to it
@jadesluv
10 жыл бұрын
Who was the ebay seller? I understand some sellers do not have the metal star on the back of the case
@ustokos48
4 жыл бұрын
What was the reason to change case? Was it cosmetic, or the key didn't start the car...?
@TheTurbinator
4 жыл бұрын
Does anyone know of a video like this for the newer MB keys with the silver metal trim on the edges.
@toms4123
9 жыл бұрын
Great that you have worked it out, great you went through the trouble of sharing your knowledge but unfortunately objective not achieved. Some of the most important shots are out of frame (cannot see what you are doing) or out of focus.... Result: this is still a trial and error undertaking for the prospective repairer.
@adolphvanner6522
5 жыл бұрын
#Sweet
@johnpak5182
8 жыл бұрын
stupid key..gabbage key..
@a-279
9 жыл бұрын
Great video
@SHK188
9 жыл бұрын
Thanks man,
@curtissharris8914
3 жыл бұрын
mine fell out after a couple sharp slaps on the table.
@erionpriftaj6304
4 жыл бұрын
My dad loves your videos. I have now got his phone but you are awesome.
@nickcrout8966
2 жыл бұрын
cheers just changed mine thanks to your vid
@ishankafernando5159
7 жыл бұрын
great thanks for sharing, very helpful, did it by my self and saved £40.00
@randyterpstra1239
6 жыл бұрын
Awesome! Thank you very much, for taking time to film and post.
@MelanieMcDaniel
9 жыл бұрын
thank you!
@elenabanica9573
8 жыл бұрын
To open the new shell must use the short part of metal key pushing down and then to side and the cap will be able to get off.
@FrancisPrepX
10 жыл бұрын
The laser piece to start the car, came off as I tried to pull out the chip... I did once before by breaking the key fob, it seems much safer
@yami434
3 жыл бұрын
Please make more videos
@ABRROB2008
7 жыл бұрын
You saved me $350.00 thank you. ..my key work perfect
@munyaradzimudehwe3440
9 жыл бұрын
My mercedes e320 2004 model key some times takes a few tries to engage in the ignition.i can hear a click when I insert the key.i have replaced the batteries but still having trouble.
@a-279
9 жыл бұрын
The batteries will only help the lock/unlock function, but the ignition portion is some form of a laser not requiring a battery. Try this method of removing the total inside panel and check for dust balls especially near the bottom where the laser key portion is. After a couple years of a troublesome key I finally found that was my problem thanks to videos like this.
@danielaesmaili2391
7 жыл бұрын
Thanks. It looks very tricky... I am afraid I miss it and brake it!
@Kyleramsey999
8 жыл бұрын
thanks Shams. I managed to get the exact one that I needed. luckily I just needed the shell
@Bigheadbaje
9 жыл бұрын
How do i get to the part where u started from....where i can see the circuit board?
Пікірлер: 173