when i used to pour concrete in the winter in manitoba you couldnt use direct heat from propane because it would cause spalding or flaking off of the concrete. i think you have a good idea but should have left the mortar dry naturally. time will tell . try it next time. merry christmas and a happy new year
@BRP42
Жыл бұрын
I’ve used this cement before and it is typically dried this way. You are right that it could spall if it were a thicker coat. This is thin enough that it generally isn’t a problem. I can’t imagine pouring concrete in the winter! You’re a better person than me! Lol.
@48thstateprospecting
Жыл бұрын
Usually in areas with freeze thaw conditions the concrete is air entrained the air entrainment allows air pockets to be formed in the concrete to help with contraction and expansion so it doesn’t break apart. the extreme heat directly on the concrete will heat up those air pockets causing the air to expand and break or explode the top off the concrete. Air entrained concrete is harder to finish since the air will cause the top to peel off on your hand trowels or power towel if you put to much down pressure on it I hate air entrained concrete lol. The refractory cement he was using probably had very little air in it so he should be ok except maybe for the lid that he moves all the time…
@StevenHanover
Жыл бұрын
Long lost artform
@melebmotors
Жыл бұрын
you have another piece left why not try making another one and let the cement cure fully before applying heat. it can be a control .when i was building chimneys you let them dry for a bit before using. just a thought. and a wrap or two of haywire around the outside.
@darrenbenson2606
Жыл бұрын
Love these videos
@richardrobertson1331
Жыл бұрын
Jason, you're a good man. I wanted to see how you made your propane/oxygen regulator and you provided me with all the details I needed. Thanks.
@phatrobsgames5561
Жыл бұрын
this.
@ja5onl6
Жыл бұрын
I was literally thinking less than a week ago I wish Jason would make a video on a furnace!
@technovikingfan
Жыл бұрын
Hi Jason! What a wonderful channel you have created! I have been hooked on chemistry and mining videos for the last while and I must say, your approach and style (all real, no bullshit fake crap) has me a dedicated subscriber!). Please keep up the great work man! So great!!!! Chris from Canada
@gregwright6281
Жыл бұрын
I feel the same way. Pure simplicity, no fluff, just functionality.
@ProfaneGod
Жыл бұрын
You could probably use the refractory cement on the brick base to fully seal the inside and have the portland cement as well that way there wont be any spills that leak out and causing a hazard to anything near the furnace.
@bentationfunkiloglio
Жыл бұрын
I make my own furnaces as well. Keeping thermal mass low definitely important! I like to build my furnaces inside of 25 gal steel drums. Wrap kaowool on inside. Pour a thin cylinder of refractory rated to approximately 3000 F. Protects wool. Also, provides more even heat. I use almost exact same shop vac blower set up. Have been experimenting with creating a waste oil/diesel burner instead of forced air/propane but haven’t had success yet.
@camojoe83
Жыл бұрын
You need a more substantial blower than a shop vac for that.
@StevenHanover
Жыл бұрын
Excellent
@Quahogstacker
Жыл бұрын
I Have washed your channel for a while noticed you have a nice furnace seems to work really well. Thanks for this great information
@jamesmihalcik1310
Жыл бұрын
I always overengineer, spend hundreds, weld for days and Jason nails it for pennies on the dollar! Awesome :) I have imbedded temp probes, mix vanes, special coatings, variable blowers, foot control double doors and Jasons performs just fine.
@angusmcnaughton4570
Жыл бұрын
Right. I just built one out of shiny polished stainless steel, have a dozen hours into it and now I am overengeneering a pivoting lid with a cam lift system... and still not fired up . probably won't work.
@VeeVets
Жыл бұрын
Simple and yet quite effective. Thanks for your explanation Jason.
@AtomicSaunders
Жыл бұрын
This is amazing. You don't need a big expensive furnace to cast metal. I'm going to do something like this to cast bronze art pieces. Thank you so much for sharing the knowledge Jason. ~ greetings from Los Angeles
@bkgold9968
Жыл бұрын
Thanks for showing us how to do this.
@larryevans7669
Жыл бұрын
The difference with "high flow" and the other type of regulators is when you want a large volume of propane the non high flow regulators think there is a broken line when you really open them up, and automatically close. They really limit how much gas can be injected in the system. I believe they look for back pressure. The high flow allow you to really fire these up. Merry Christmas to you Jason.
@robs9574
4 ай бұрын
Forgive my ignorance but how do these keep the flame from traveling back to the tank? Second question, would this burner setup work on much smaller 3 gallon and 1 gallon furnaces? I like the idea of using the tank vs small bottles. Thank you for your time.
@larryevans7669
3 ай бұрын
@@robs9574 propane does not burn in the absence of adequate air or oxygen, so, normally no fire back up the gas line. If it worries you, get a back flow filter check valve usually available for oxyacetylene setups. If somehow air is in your propane tank, it's just a bomb, and will detonate at some point. Smaller furnaces will work pretty well with just venturi effect air in the mix. Adding air from some kind of blower will heat things up a lot, and is very helpful for larger spaces you are heating.
@robs9574
3 ай бұрын
@@larryevans7669 thank you👍
@BRP42
Жыл бұрын
As usual, a great video! Just a recommendation: when cutting the wool a face mask is needed. The fibers are very dangerous to breathe (think asbestos). I’ve cut this a bunch and you can also use scissors, but that tends to dull them. ;) Also, this looks like it is 2” thick. Folks should know that it comes in different thicknesses. Thanks again for the video.
@ohcrapwhatsnext
Жыл бұрын
So one inch or two??
@justinotte1163
Жыл бұрын
My wife surprised me with a long sleeve shirt with your logo:), Very cool…love your videos..Thank you😊
@64RWD
2 ай бұрын
I agree with you I also tried venturi and it was also weak now I have a blower from an old gas boiler and it is 100% better.
@saltyberserker4235
Жыл бұрын
This is great. I have been at a magnesium foundry for a few months and have worked with the maintenance department some. They have to repair the pumps we use to transfer the molten magnesium from the pots to the casting molds. Anyway, they have this furnace to heat the pipes on the pumps to melt out any magnesium that cooled inside, so that they can work on it and change pipes out. I think I'm going to show them this video and build a better furnace, using this technique, for them.
@xenaguy01
Жыл бұрын
Nice and simple. Proof positive that one needs not spend a bunch of $$$ (or AU$$$, £££, or €€€) to start smelting ore, or even recycling aluminum cans or copper wire.
@scruggsbuster9458
Жыл бұрын
Yeah I always wondered how you make those things but they're made out of and how to do it thank you now I know how to do it but I'll be watching your video again to make sure I'm doing it right so thank you and merry Christmas Happy New Year I'll see you on the next one
@williamscoggin1509
Жыл бұрын
Jason, you put out some great information that no one else does. 👍🏻👍🏻🇺🇲
@peteroliver3408
Жыл бұрын
Kaowool life depends on the grade, and use conditions, the most common variety is essentially a Mullite (aluminum silicate) fiber. Mulites are a bit more sensitive to contamination and thermal cycling as they tend to recrystallize and become brittle at elevated temperatures. But, are a lot cheaper than pure Alumina or zirconia (Zircar) insulation given the nature of the materials your using a low cost disposable like your using is likely the best option in compromise
@TechGorilla1987
Жыл бұрын
@4:33 - If you're looking for a high-flow regulator, look for ones that are used for soup cookers. I'm not sure how many BTU that is, but it's all of them.
@gazzwonga1414
Жыл бұрын
I used to work with ceramic fibre blanket,board and cloth. we would enclose it in ceramic fibre cloth (same stuff fire blankets are made from) to give it longevity
@jasonhowarth6789
Жыл бұрын
Nice tutorial! 👌 Thank you for the upload, Jason!
@daz41262010
Жыл бұрын
awesome job Jason :) looks nice :)
@jimmime
Жыл бұрын
Merry Christmas, Jason!
@nickvie71
Жыл бұрын
Jason, you are just awesome. Have a great X-mas time with your beloved ones and stay safe. Thank you so much for enterteach us throughout this year. 💜💜💜💜
@davidrowe9168
Жыл бұрын
It’s a delight to watch your work. Thank you
@COOPERSCICHILDS
Жыл бұрын
Coooool happy holidays
@rockman531
Жыл бұрын
Hi Jason, I have a small Kaowool furnace that works great! Time for a larger one! Great video to help with construction. I use chicken wire around the small furnace instead of baling wire - gives better support. Thanks again! Merry Christmas to you & your family and the entire MBMMLLC gang. Take Care, Jim
@kevinlewis9151
Жыл бұрын
Make sure you wear a respirator when cutting the wool
@vinnieg.6746
Жыл бұрын
That was cool. Looked simple enough. Thanks J. 👍
@Alondro77
Жыл бұрын
This is very useful. I'll be making one of these furnaces in spring.
@PaulAllee
Жыл бұрын
Just in time! I'm making one soon! Thank you Jason
@THR33STEP
Жыл бұрын
Merry Christmas Jason!
@jimgoodman1845
Жыл бұрын
🔥FIRE in the HOLE🔥 MERRY CHRISTMAS 🎅
@downyourtube
Жыл бұрын
Merry Christmas to you and your Family Sir!
@josephcormier5974
Жыл бұрын
Awesome this should work much better than just the wool six Stars sir
@indrin12
Жыл бұрын
Thanks for sharing, awsome video.
@davidbwa
Жыл бұрын
Thanks. I was looking at your similar one in a recent video and mentally doing that build in my head based on what I was seeing but it's nice to see it clearly and have bits explained. SUGGESTION - maybe include links in the description for the various products you used in case anyone isn't sure. I know it is fairly straight forward but might help some.
@waynoswaynos
7 ай бұрын
You know what would be a great thing to make? A flue that sits about that thing and pipes the poisonous smoke and fumes outside. Maybe made out of some old stainless steel fireplace flue tubes.The heat would make its own up draft I am pretty sure.
@windyhillfoundry5940
Жыл бұрын
The irony, you and I putting out a furnace build vid the same day😂
@darrenbenson2606
Жыл бұрын
Love these videos
@HRM.H
Жыл бұрын
Awesome !!! Thanks for these videos. Really helpful for starters. I hope to do my own silver smelting in the future so these will be very helpfull
@Fatamus
Жыл бұрын
Cool 😎 happy ho ho🎅🎅🎅 thanks👍
@haroldishoy2113
Жыл бұрын
Jason, Thanks for the demo and I hope the lined furnace lasts considerably longer than previous ones. I can’t imagine the difficulty of this back in the 1800s without propane. Merry Christmas to you and your family.
@camojoe83
Жыл бұрын
Never seen an oil furnace, have you?
@ElectricPoliville
Жыл бұрын
I think you should have let the factory cement dry for a few days before firing. Keep up the good work and you and your family have a wonderful Christmas ⛄
@d.t.4523
Жыл бұрын
Keep working. Good luck! 👍
@rodneynormanhersom3583
Жыл бұрын
i wish you had my old furnace it was cast iron made from a bit of iron pipe and refactory cement it would fit a 9-liter cup man i wish you had it
@inhotwater457
Жыл бұрын
I just found your channel. You are my new favorite person. I am inspired. Can I come hang out with you and prospect? Merry Christmas!
@miketanner1920
Жыл бұрын
Merry Christmas brother and a happy new year Thank you for all the great videos
@dewardtaylor4192
Жыл бұрын
Jason thanks for another great video Happy Holidays
@silvaorgold
Жыл бұрын
Merry Christmas Jason can't wait for the next one thanks for the great tutorial
@jesselyall7519
Жыл бұрын
Merrychristmas an happy newyear.!! Godbless
@davidsidwell8749
Жыл бұрын
That k wool is amazing how it is that flexible and can withstand that high of heat.
@scotthultin7769
Жыл бұрын
Merry Christmas to you and your
@mohammednovalija
Жыл бұрын
Wonderful tape - Thank You for sharing
@matter3232
Жыл бұрын
Like the blower set up i got the blanket for my furnace and ill get the cement but i need it mobile so ill get a 55gal barrel for 15 bucks mabe....
@JimTcarver
Жыл бұрын
Thanks for sharing this information. Question, do you use an orfice or straight flowing the gas into the pipe?
@user-np8uz3qu7b
Ай бұрын
Does he use an orfis?
@longriderxx
Жыл бұрын
Merry Christmas
@jasonlacasse2724
Жыл бұрын
Happy holidays great educational video.
@goldieirish9958
Жыл бұрын
I think it was more dangerous w/o some kind of sealant because WHAT IF it blew or fell open while that huge flame is blowing? But I like it! What about some metal tape strips all the way around the outside to hold it tight. Like a barrel.
@Englishkyle
Жыл бұрын
Dude thanks so much for that video
@AmericanPatriot_420
Жыл бұрын
Very Kewl. Thx for sharing this.
@Drachenfang
Жыл бұрын
Does the refractory cement cure or dry? I know that regular portland cement uses the water it is mixed with to react and form the crystals that holds the aggregate together. I was concerned when I saw you heating the refractory cement that you might have been evaporating the water it needed for the curing reaction but I do not know if refractory cement cures like a concrete or gains its strength from a dehydration synthesis type reaction. It does strike me that if it needed water to cure you'd be left with a lot of mineral hydrate crystals in there which would decompose with the heat of the furnace anyway.
@wombatillo
Жыл бұрын
At least Rutland 211 is water cured alumina based refractory and doesn't need heat to cure. It does say "Does not require (but is stronger with) heat curing" and I assume that before this there is a minimum room-temp period of drying/curing. Depends on the refractory I guess? Some of them say let cure (react with water) for so and so many hours or days and then you can fire them up. Always read the manuals and instructions of use with construction materials.
@dionh70
Жыл бұрын
See, I've long wanted to smelt down scrap copper, aluminum, and brass that I collect during handyman projects, but a $500 furnace with hundreds more in crucibles, molds, tongs, etc. just doesn't make economic sense. This looks like a far cheaper method for hobbyist-level use, and I can weld up my own cone molds, pouring tray, and so on. Thanks, Jason! I would love it if you could post links in the description to the sources for your wool & firebrick, especially if your suppliers are willing to either give you a commission or a discount to us viewers.
@reginacarroll8149
3 ай бұрын
Thank you
@bitsofeverything8385
Жыл бұрын
Works great, would be nice to have it in a container and with more rigidizer to not have fibers release in air, still love the simplicity of his model.
@Peter_S_
Жыл бұрын
You can always cut the bottom and top from a 30 or 35 gallon steel drum and weld handles on the sides if you want something that will last longer and weigh 40 times as much. Coat all the exposed wool and you're golden. You can even use the sealed end of the drum as a lid. Some people weld a piece of pipe to the sides of the pieces and slip a smaller pipe through them as a swivel. Works a treat for the hobby miner.
@bitsofeverything8385
Жыл бұрын
@@Peter_S_ Devil forge has a half millimeter thin foil.
@wilfor03
Жыл бұрын
Hey Jason.....you da man on these builds...got a quick question for ya........do you have a small jet orifice in the 90 degree coupling on your 18" pipe, and if yes, what size....? You're my hero.....Bill
@ja-canadian5451
Жыл бұрын
With all the splattering I have seen in your videos I was wondering if you ever take retired furnace wool and process it to recover any metal that got onto the wool from splattering melts.
@alanpecherer5705
Жыл бұрын
Lowes is having a sale on Craftsman baby vacuum cleaners which would probably work as a blower. I DON'T KNOW if they have a single output port or if they let out the air they suck in thru multiple vent holes. That would surely matter.
@jamesharris4695
Жыл бұрын
Using the shop vac was an idea I never came close to thinking about, thanks for the tip
@011CJ
6 ай бұрын
Mine has ben waiting to have the wool sealed for over 3 years now 😂 sealing it will make it last, and you won't be breathing fibers 👍 i use rugidiser then the refractive coating .evryone hase their own methods. Thanks again
@rgrg3683
Жыл бұрын
very nice , you can also use adobe blocks, easy n cheap, or a ground earth pit, all good 🕳️🔥👹
@markroper9269
Жыл бұрын
Love the video!!! I would be interested to see if the cement works. Merry Christmas!!
@phillipremondini5617
Жыл бұрын
And that was the last time we ever saw Jason
@orsud1890
Жыл бұрын
Salut mon ami, très bonne solution. Bravo 👌👌✨
@Ydnar1155
Жыл бұрын
2:20 Did you say "2 Pi R or Pi D"?. Glad you cut it a little long.
@cocopufer5667
Жыл бұрын
That is interesting!
@Makobadger
Жыл бұрын
I have an assethelene regulator on mine has a presure guage on i use a small usb blower i bought on wish can run it of a power bank 😊 i use an old aircon sillender as the housing i also use cale wool but the flux eats away at it if it spills on it
@chasemuehlbauer14
Жыл бұрын
Unga bunga me makem furnace. Crude, simple, effective.
@jasontaylor6827
4 ай бұрын
Could you melt brass and copper in that? Thanks
@Stevesbe
Жыл бұрын
That's a higher pressure regulator then like you would use on a grill
@sandstorm6605
Жыл бұрын
Pretty dang cool man. I might have missed this in the comments but what did you call that wool exactly? I couldn’t quite tell what you were calling it.
@leewhite1969
7 ай бұрын
Can you explain your burner a little better? I’ve seen them built with mig tips to inject the propane. Does yours just flow freely through the elbow?
@carsonrush3352
7 ай бұрын
When using Portland cement as a base, doesn't cement explode when it gets superheated?
@ChatterontheWire
Жыл бұрын
Instead of refactory cement on it, you probably want to look into a rigidizer to seal it up and protect yourself from the fibers off of it. The Refactory cement may work just the same, but t hink it is going to cost you more and be more work to install. In general though, simple and effective furnace for sure!
@StevenHanover
Жыл бұрын
What is that rigidizer
@ChatterontheWire
Жыл бұрын
@@StevenHanover Lots of different types, but a few name brands to look at: Mr Volcano Rigidizer Simond Store Rigidizer Simwool Rigidizer no idea on best option there
@jozefigueiredo8792
Жыл бұрын
Hello, i don't understand what you mean by nipple, it looks like just a 1" pipe. Is there something else that attaches to the front of the pipe? Because i didn't see it, thx.
@JackJack-pq8eu
10 ай бұрын
So is there no threat of the fire heading up the pipe to the propane tank?
@ATF.California
Жыл бұрын
You could use a stainless steel bucket and put that insulation in it that works even better then this idea also you do no that you could ignite the gas farther away from where it’s coming out of
@pnwprospecting
Жыл бұрын
Thank you for doing this! I have some samples to crush and smelt! Would love too see your facility if that’s possible to do in the future?
@user-dv9ze1nt2d
Жыл бұрын
I'm having a problem with the flame going all the way to the nipple that comes off the regulator hose do I need some kind of special nipple or do I just need to turn up the pressure something
@CuriousEarthMan
Жыл бұрын
Thanks Jason! I hope to see how the refractory cement holds up. I've seen Water Glass (sodium silicate) used (sprayed) on the kaowool too, and it will adhere layers of kaowool too. Were the firebricks the IFB, lightweight kind? Thanks again!
@jimcatanzaro7808
10 ай бұрын
Put a small turbo charger on it but keep it away from the heat that will speed it up
@coldwaterprospecting3806
Жыл бұрын
Great video. Thanks for details. I see two types of Kao wool for sale. 6# and 8#. What type do you use? Thanks. Shawn.
@edwingolddelirium
Жыл бұрын
mix it with waterglas the cement
@danielmcgrath7519
Жыл бұрын
👍
@ericatavares4697
Жыл бұрын
Encontrei um afloramento de rochas quartzo especificamente com muitos sulfetos pirita calcopirita um pó preto quw não sei o que é e algo mais com processo de triturar as rochas e torrefação dos sulfetos posso detectar algum ouro caso ele esteja presente dentro dos sulfetos?
@thedopplereffect00
Жыл бұрын
Is there any way you could recycle the hot air coming out the top with a heat exchanger? If you could somehow preheat the air from the shop vac, maybe it would be more efficient?
@user-uf2wr2uq3y
Жыл бұрын
hi is exist iron in ore constrains copper of collect gold
@joseparedes4975
8 ай бұрын
Is it also for smelting copper ? Please let me know.
@xyzabc4574
Жыл бұрын
The instructions that came with my refactory cement said to let it air dry naturally. If you experience any problems with this refactory install over the long run, keep this in the back of your mind as a potential root cause for failure. I'm not a pro. Just a hobbyist. Grain of salt and all that.
Пікірлер: 183