www.diybookbinding.com/diy-boo...
Holding the pages of your perfect bound book together while you glue everything together can be frustrating. This simple DIY tabletop bookbinding jig is an easy way to get the job done.
Here are the supplies you need:
- 1"x2" board about 4 feet long - poplar is a good option
- 1"x2" board about 2 feet long
- 4 adjustable clamps
- Table with a straight edged top that overhangs the base
MY CURRENT VIDEO GEAR:
Sony a5000 Mirrorless Camera with 16-50mm kit lens - amzn.to/2LytxQH
Canon 50mm f/1.4 FD Manual Focus Lens - amzn.to/307DF78
FD Lens to Sony E-Mount Adapter - amzn.to/2Jp4ixy
TAKSTAR SGC-598 Microphone - amzn.to/2XIuJrq
Zoom H1 Digital Audio Recorder - amzn.to/2JlbBGJ
SUPPORT US:
/ diybookbinding
Visit Us on Facebook:
/ diybookbinding
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links and make a purchase, I may receive a small commission at no cost to you. This helps support the channel and allows us to continue making great content for you! You are in NO WAY obligated to use these links. Thank you for your support!
Негізгі бет DIY Tabletop Bookbinding Jig
Пікірлер: 4