An hour on DJI tech support and they could not solve the problem. But your 4 minute video did. Thank You so much
@Tips2Fix
3 жыл бұрын
Wow Im happy to hear this, thank you for sharing this comment , if you can share this video with your friends will be helpful for tips2fix , Blessings.
@Bobi-ow6ou
10 ай бұрын
This saved me hundreds of repair cost, I flew my drone without problem then I took out SD card to download photos and videos the next day my drone couldn't connect to controller, luckily enough I came across this video followed all the steps and boom my drone is back in the Sky again.
@Tips2Fix
10 ай бұрын
Im happy my friend that you like this video, and was helpuf for you. Thank you for your comment sharing with us your experience .
@jenniferbroomhall7400
4 жыл бұрын
Finally, after much searching on forums you have given clear instructions and I am flying again after tearing my hair out for weeks. Thank you
@parsanaeimipoor5569
4 жыл бұрын
Thank you so much , this helped me after 2 years of not using my MavicPro , i emailed DJI and they didn't respond but thank you my friend you really made my day ALOT better
@Tips2Fix
4 жыл бұрын
Wow how is possible they did not respond , wired! i'm happy to hear that this video was helpful for you. Please subscribe the channel and share if you can , this should be helpful for us to Grow Thanks 😊
@kriswilhelm36
3 жыл бұрын
this did not work for me. I don't get that "primary" / "secondary" option. Mine just says "linking remote controller and then pops up and says "link to RC" and after I click it then it does nothing.
@mdubault
4 жыл бұрын
I just got mine back from DJI service for a left rear arm repair. Knowing that they had flight tested the unit I figured I would have to go through the BIND process again. Your video was spot on. Thanks much
@Tips2Fix
4 жыл бұрын
Thanks for sharing
@SaltWaterSalmon
4 жыл бұрын
Excellent instruction. Quick, easy, effective. Let's go flying!
@Tips2Fix
4 жыл бұрын
Enjoy Bro , thank you for watching
@stevenlindgren3314
Жыл бұрын
Awesome video, I'll have to try this out after I recharge my remote. I recently had a crash and discovered that my drone is no longer connecting to my remote. Thank you for making this video easy to understand.
@Tips2Fix
Жыл бұрын
yes im happy that i was helpful for you , let me know if everything works well now
@ilovetucson
4 жыл бұрын
This has been very helpful. The tablet sees the camera however the controller still says trying to connect.
@gelosoriano
Жыл бұрын
I haven't been using my Mavic Pro for quite some time and tried using it today and had issues connecting. Thanks for your video - very helpful! 𝕊𝕒𝕝𝕒𝕞𝕒𝕥 from the Philippines!! 💗
@Tips2Fix
Жыл бұрын
Im happy to hear that this video it was helpful for you , and thank you for sharing your comment with us
@mjnojemar9759
Жыл бұрын
Merci pour la vidéo...cela m'a permis de ressoudre le problème que j'ai eu hier.... après 2h de déplacement je n'ai pas pu décoller avec mon drone.. Merci pour la vidéo
@aalapparmar1
4 жыл бұрын
easy short simple way to explaining a big issue. thanks a bunch mate
@Tips2Fix
4 жыл бұрын
Yes , you're welcome
@PedroMacedovideos
Жыл бұрын
Thanks man, this video really help i thought i was going to have to purchase another drone
@Tips2Fix
Жыл бұрын
Glad I could help! And save some money 😃 If you can share the video as a post in fb it will be helpful for tips2fix
@booneymoonrock3152
3 жыл бұрын
Thanks man that really helped me out. All the way in Lexington Kentucky 💯
@byrdhouse2105
3 жыл бұрын
Just got gimbal replaced and controller wasn't recognizing drone. This video helped quickly get it back connected, thanks 😚
@hacketstown8
10 ай бұрын
Top man, sorted in 5 minutes. Thank you 🙏
@Tips2Fix
10 ай бұрын
Thank you for your comment bro
@peterhewitson71
2 жыл бұрын
Thankyou so much you saved my drone , I had to change controllers and it would not connect . Again you are a champion
@harristeins3776
4 жыл бұрын
hate to say it but my German Shepherd found the original RC delicious so I got a replacement from a friend and your video allowed me to link them and fly again.
@Tumish74
4 жыл бұрын
Really thanks dude for your hint. Appreciated it and definitely time saver 👌
@Tips2Fix
4 жыл бұрын
Happy to hear that , don't forget to subscribe 😃
@paulrawstron3170
4 жыл бұрын
Great help thanks. My drone away for repair and when I got it back would not connect to controller. Now sorted. Cheers !!
@Tips2Fix
4 жыл бұрын
Great 👍
@Friscone
Жыл бұрын
Thank you my friend.THANK YOU VERY MUCH FOR YOUR HELP
@Tips2Fix
Жыл бұрын
You are welcome
@PajaD25
4 жыл бұрын
Hello. Thank you very much for the step by step tutorial.
@Tips2Fix
4 жыл бұрын
Im happy to hear that , your'e welcome :)
@Kofipong
3 жыл бұрын
After 2 years and this is useful! Thank you!
@andrashorvath8753
Жыл бұрын
Thank you, very quick and useful!
@Tips2Fix
Жыл бұрын
Glad it helped!
@kreativekraal
11 ай бұрын
THank you so much my brother
@Tips2Fix
11 ай бұрын
You are welcome
@winsmediagh
Жыл бұрын
You just got a new subscriber for this very helpful video.
@puangpambudi
3 жыл бұрын
Very Helpful.... Thanks for your video
@vedantawachar6969
Жыл бұрын
Thanks man ❤ you saved my life
@Tips2Fix
Жыл бұрын
I'm so glad to hear that my video was helpful to you! It's comments like yours that motivate me to create more content. Take care!
@billsstudio2528
Жыл бұрын
Another, thing to check, although obvious. On Mavic Pro 3 Classic, make sure your wifi is connected by double swiping DOWN and accessing WI SETUP and Other critical items.
@Tips2Fix
Жыл бұрын
Thank you for contributing to help others , thank you for sharing :)
@markgil7681
3 жыл бұрын
is this possible with DJI MINI 2? can't find that button in MINI 2. please notice my comment🙏🏻
@Fonz19
Жыл бұрын
Thank you I'm up and working now
@Tips2Fix
Жыл бұрын
Supper , enjoy piloting the drone
@rizjani405
3 жыл бұрын
Thanks .. U r a life saver
@glennmarron
2 жыл бұрын
Very useful. Thank you!
@vehicleobsessed3389
4 жыл бұрын
Thanks! Your video helped me.
@MRBATTISTA1
4 жыл бұрын
thank you.....got it working !!!
@scandinaviatrip8328
3 жыл бұрын
Bro thank you very much for your explanation and help.That worked perfectly 👍
@kaidkyoung4298
Жыл бұрын
which app are you using on you Ipad? I can't find any related APPs in Google App Store
@dvstudio7521
2 жыл бұрын
Thanks
@kiran.vedula
3 күн бұрын
Thank youuuu!!!
@antonioefalate
3 жыл бұрын
thx bro you video very helpful
@v0lkmaster252
3 жыл бұрын
My sh1t just says. Ready to fly then disconnected and back and forth. I bind the controller and drone and I don't even see the camera mode
@bryceeckert4200
2 жыл бұрын
Many thanks
@Jimrogalski
4 жыл бұрын
You saved the day! Thank You!
@dbtech6272
2 жыл бұрын
thanks a lot bro, this is very helpful
@swagsurfer05
Жыл бұрын
Thanks man, it worded immediately
@Tips2Fix
Жыл бұрын
Supper im happy that you found this video helpful
@darrinanddonna
4 жыл бұрын
Great tutorial, looking for a cheap second hand Mavic with problems like these. Subbed 😀
@Tips2Fix
4 жыл бұрын
Thank you for sub :D
@IkonicLionProductions
2 жыл бұрын
Fantastic instructions. Cheers!
@christopherseymour7044
3 жыл бұрын
After pressing "Link remote controller" button, mine doesn't give an option to click "Primary remote controller" Instead, mine says "Confirm controller frequency?" And I can only click "Ok" or "Cancel" Whats the issue with mine, whys it different?
@nettojd1666
3 жыл бұрын
press the linking remote Controller button to startlinking Remote controller is linking. Linking will timeout after
@krsavchik9654
3 жыл бұрын
2:05 and if the red LED is on and flashing slowly where is the WI FI and RC switch
@derrinrguitar8011
3 жыл бұрын
Thank you!
@marcaobilly
2 ай бұрын
Obrigadoooo. Parabéns , inscrito no canal!
@joshhouston7682
4 жыл бұрын
Thank you bro! You've saved me
@Tips2Fix
4 жыл бұрын
You're welcome Bro, enjoy flighting your Dron :)
@vishalp.chaliha6723
5 ай бұрын
Thanks a lot for the solution. It worked for me! Subscribed your channel too👍
@Tips2Fix
5 ай бұрын
Thanks for the sub
@12POLIO
4 жыл бұрын
The little light doesn't change color to red for me and the drone will not connect the controller, it counts down from 59 to 0 and no connection. Any ideas?
@KylieGayle
4 жыл бұрын
We have the same problem here
@Tips2Fix
4 жыл бұрын
Try Hard Reset Now open the DJI Assistant 2 application on your computer, then plug your drone to your computer via USB cable. Afterward, click on the Mavic Pro icon to select it. Then click on the Firmware Update. Now click on the Factory Reset button in order to restore the device to Factory Settings.
@davidscottblacksmith
3 жыл бұрын
Thank you for helping me 😊
@chrh2929
3 жыл бұрын
Big help bro !
@klastorps
3 жыл бұрын
Do you know is Mavic mini has a button to?
@yahoolyafool
2 жыл бұрын
It didn't work for me; remote still says connecting, and the camera footage will not appear on my device (tried with two separate phones). Did the whole remote link to no effect. I am able to make the drone take off, but without being able to record or see what I'm doing, it makes it very pointless. Ugh, this issue has caused me to waste so much of my holiday time just looking and trying solutions.
@Ale_-bx6jb
2 жыл бұрын
Have u found a solution got problems too
@mahmoudbamarni3803
2 жыл бұрын
good night. how can I contact new controller to mavicair2
@charleshall2942
4 жыл бұрын
ok so my Mavic Pro turns on but I get no bilking yellow light. also no light in small door next to button. it also won't connect to assistant 2 to do a factory reset on drone or controller. need help please.
@Tips2Fix
4 жыл бұрын
did you fixed yet? Try Hard reset. Now open the DJI Assistant 2 application on your computer, then plug your drone to your computer via USB cable. Afterward, click on the Mavic Pro icon to select it. Then click on the Firmware Update. Now click on the Factory Reset button in order to restore the device to Factory Settings.
@tahaatl3449
2 жыл бұрын
hello, did you solve the problem, i have the same problem
@aharleyguy
3 жыл бұрын
Using a very small screwdriver, i could not get the button pushed to change the light back to red? What can I do next?
@nenavathdharma4238
4 жыл бұрын
Super bro drone
@abedimathias9424
2 жыл бұрын
aider moi svp, j'ai tout essayer; je n'arrive plus a synchroniser mon drone dji mini 2 avec la télécommande; j'ai tout essayer mais ca ne marche pas, aidew moi svp
@randycrocker114
3 жыл бұрын
Someone help me? My drone is doing the exact same thing not wanting too connect too the drone and the camera is going crazy and couldn't get it too connect what should I do?!
@chadkaloy9161
Жыл бұрын
can u do one for the DJI Spark?
@Tips2Fix
Жыл бұрын
Good idea
@eroextha2952
4 жыл бұрын
when i click linking remote control it says link RC? with cancel and OK option but nothing happens . .. plz help . , i m using i phone
@asiazri7754
4 жыл бұрын
ME TOO. Did you fix it I really need help I’ve been trying to fix it for THREE years. Please help
@ugolovniyrozysk
2 жыл бұрын
Worked. Thanks!
@juancamilobastidasaponte1588
Жыл бұрын
It didn't work for me: after push the small button, I needed do it several to turn it red, and once red, it didn't connected. Any other idea?
@filipesilva1395
11 ай бұрын
I have the same problem.
@yigitc1887
3 жыл бұрын
Nice video!
@miguelito6915
Жыл бұрын
Mine still won't connect and no camera view either plus on power on of drone one motor doesn't move and lights are solid red
@studio47piracicaba
2 жыл бұрын
Obrigado pela ajuda! 👏🏼👏🏼🙏🏼
@itsmecharlie100
2 жыл бұрын
When I click on link remote controller, it says confirm frequency settings. I clicked that and nothing happens. Help.
@frankconsidine5989
4 жыл бұрын
Did not work for me controller does not connect with app at all. Also controller shutdown after 3 seconds. Any help would be appreciated. Just got three days ago
@adrijonskas6103
4 жыл бұрын
2:56 what button you have to press?
@Tips2Fix
4 жыл бұрын
sorry for delay answering we didnt see this comment , its a small button reset button , did you fixed yet?
@bobbyheising4094
7 ай бұрын
mine connects but doesn't connect the camera and won't let me fly
@Tips2Fix
6 ай бұрын
can you try to reset your drone?
@Btalks1
2 жыл бұрын
How to it with mavic air
@fbijaguar1194
Жыл бұрын
What's the app called
@Tips2Fix
Жыл бұрын
DJI GO 4
@adiwijayakusuma6970
4 жыл бұрын
I tried but failed, after I checked the dreadlocks camera problem, .... what should be replaced sir
@Legionnairemonfrere
4 жыл бұрын
thx u bro !!!
@SamJewel
3 жыл бұрын
Hey thank you for that I have been going bonkers but it still did not find the drone just kept saying "binding" on the controller and beeping with no connection. I got the drone to go red on the little light and all the rest but no connection. Can you help?
@Ale_-bx6jb
2 жыл бұрын
Same problem have u solved ?
@SamJewel
2 жыл бұрын
@@Ale_-bx6jb i think i sold it and bought a new model that one just would not match with my phone
@BeudohChannel
Жыл бұрын
where the button in mavic 3 ?
@lsantos79
Ай бұрын
Not letting me to activate it
@Tips2Fix
Ай бұрын
why does it says anything ?
@v0lkmaster252
3 жыл бұрын
Nope didn't work for me still blinks ready then disconnected ready and disconnected. I tried multiple wires and different ports
@windsongdj
2 жыл бұрын
I have done this 15 times I can't connect
@_CONBOY_
2 жыл бұрын
Mine won’t pair need help bad
@aharleyguy
3 жыл бұрын
Ok, Still having some issues here, Followed your video, Until I tried to reset the button on the drone, the light was green and I tried to push the button. not sure the button would push in or any indication that it did. The light did not change to red as in your video. so
@tracymefford8162
3 жыл бұрын
The light won't come on
@RFT2112
4 ай бұрын
Not Linking times out everytime.
@Tips2Fix
3 ай бұрын
Try to reset it all, maybe you need to firmware upgrade your drone
@AnabolicPopcorn
2 жыл бұрын
why is everyone fast forwarding the actuall stuff people want to se.. show the 100% process.
@CollinCabral
4 жыл бұрын
It doesn’t work
@nenavathdharma4238
4 жыл бұрын
Phantom 4 pro drone cost bro give me
@v0lkmaster252
3 жыл бұрын
Mine freaking blinking from ready to fly and disconnect damn annoying
@Kemal655
4 жыл бұрын
Dont work on my mavic :(
@Tips2Fix
4 жыл бұрын
why did you click that reset button? what is your situation?
@Kevin-rs7uk
4 жыл бұрын
Didnt work
@georgioantoine4194
Жыл бұрын
what App is being utilized?
@Tips2Fix
Жыл бұрын
As i remeber , it was the offical app Djj mavic pro app
@simplycher
4 жыл бұрын
Thank you so so much!
@Tips2Fix
4 жыл бұрын
You Are welcome :) Please subscribe the channel :)
Пікірлер: 146