The RC was off bro. When you press the power button once on the RC it only shows the battery level. You had to turn it on the same way as the drone. I'm sure you have it figured out now.
@TomLeeman
2 жыл бұрын
Thanks for the tip
@angelmanuelcamacho8690
Жыл бұрын
Yes you can see it 😂, its off 😂😅😢😢😮
@jeremyboyce1537
Жыл бұрын
Hahahaàaaa , turn the Remote on my Brother !!!! Hahahaaa , you got me Cracking up !!!!
@GrooveOn
2 жыл бұрын
Nice video, I've had the exact same issue but I fixed it!!! What I eventually found the cause to be was that my phone's USB connection was faulty! Even though my phone charges, when I plugged it into a PC, it did not show up as a recognised device. You must have this to communicate with the controller. I used another phone, downloaded the DJI fly app and boom all working!! You do not need to press anything to connect, if it's all set up correctly, it will automatically recognise your drone type. Good luck!
@TomLeeman
2 жыл бұрын
Thanks for the info and notes I finally got it working thank you and thanks for watching
@marceloalmeida3780
2 жыл бұрын
@@TomLeeman what did u do to work?
@aKnoLedgeEd
2 жыл бұрын
@@TomLeemanCould you please share the solution?
@serdiefgotreb
2 жыл бұрын
@@aKnoLedgeEd solution was he never turned the RC on. You have to press the power button, release then press again and hold.
@Trout-Anator
2 жыл бұрын
That worked for me I plugged into my tablet and boom issue resolved, my phone is older and the usbc port is not very good any more so I’m sure that’s what the issue was in my case
@wayntiole
2 жыл бұрын
SOLVED! I had the same problem with my RC not connecting to a new Android Tablet that I got because it had an HDMI output port on it that I planed to use with HDMI goggles to fly my Mini 2 FPV. The RC had always connected to my Samsung phone but would not connect to the tablet. The tablet worked fine with my Skydio RC though. I kept trying various cables and adapters including an OTG adapter and finally found a combination that worked every time! The first was with a specific USB A male cable into a USB A female to micro usb OTG adapter into a micro usb to USB C adapter then this adapter end into the RC with the other end of the cable with the USB C connector into the tablet. Since then, I have found out that I can use the same combination with the exception of just using a USB A female to micro USB adapter in place of the OTG adapter. The thing that is very critical is a few USB A male to USB C male cables will work but most won't! I have only two that worked and one was short (about 5") and the other was long (about 3') so length does'n seem to matter either. The only way of knowing which cable will work is to try it.
@TomLeeman
2 жыл бұрын
Excellent tips I’m sure that not only will I but all of our viewers enjoy your information very good enjoy your drone and thanks for watching
@vincenzopromedia
2 жыл бұрын
Why use type A at all? Why not just get a replacement for the DJI controller cable? Skip the type A cable, and just use another micro USB to USB C. Male to male with no adapters.
@JW-uv7ww
Жыл бұрын
Android is the problem. Biggest piece of garbage on earth.
@jeremyboyce1537
Жыл бұрын
Mr.Leeman , I just Subscribed to your channel cause every time I look at this , I have a good laugh and that helps the Soul , take care my Friend 😁
@TomLeeman
Жыл бұрын
Welcome aboard!
@EllieBCN101
8 күн бұрын
I came in here to find a solution and it was for the same reason: USB was not connected to the controller on the other end🤣🤣 After reading the comments it is finnaly working and downloading new firmware.. Thanks KZitem users!!
@TomLeeman
8 күн бұрын
Glad to hear it enjoy your drone. Thanks for watching.
@vincenzocerioli
2 жыл бұрын
Your video save my Mini 2 with a firmware update went wrong.....thank you very much !
@TomLeeman
2 жыл бұрын
You are welcome thank you for watching
@Mr740624
2 жыл бұрын
Pool popPanasonic - LUMIX G7 Mirrorless 4K Photo Digital Camera Body with 14-42mm f3.5-5.6 II Lens - DMC-G7KK - Black
@kenblinn6627
2 жыл бұрын
What is the solution?? I’ve watched the video and read all the replies!? THERE IS NO SOLUTION
@muscleboundmovers9446
Жыл бұрын
I know you probably already fixed this since it was so long ago, but mine wouldn't work because my phone was not compatible with the latest upgraded version that recommended on the instruction manual. So I called DJI Support and gave them my phone model number and they are going to send me a link to an updated software version for my phone. I have an A series Samsung and DJI assured me that even though it's not on the list of compatible phones on their support page, they confirmed that it is compatible and they are going to send me updated software to work with my phone.
@TomLeeman
Жыл бұрын
I did have to update the firmware on the drone and then I had to update the software on my iPhone, so yeah that’s probably it but then I found out that one press and then a press and hold on both of them and then you have to wait a couple minutes before it like initiates so each time I did it, and I have the drone backwards to the back of the drone facing me, and then I would have to wait and then it will pop up so anyway good luck with your drone. Thank you for the comments and thanks for watching.
@muscleboundmovers9446
Жыл бұрын
@@TomLeeman Hey Tom, I just got off the phone with DJI Support and they told me that they have not finished testing my Samsung A13 5G and it is not yet compatible with the Mini 2. I also have other phones and devices like old Samsung Notes 4 and 5, iPad 68 and Nord 10 5G, but DJI told me none of these have been tested or are compatible either. Man this is frustrating. I have two other lower quality drones SG906 Beast Pro and EXO Ranger that I can fly until I find a solution. Do you know of anyone that has been successful with a third-party app like Rainbow or Litchi? It seems that these apps claim to work with more phones than DJI has bothered to completely test. DJI can not even give me a date as to when they will complete the testing compatibility of my A13 so that's really frustrating knowing that I might have to send this drone back or buy a new phone.
@slack619
Жыл бұрын
I am having the same issue how did you contact anyone with DJI because i can't fly mine at all
@muscleboundmovers9446
Жыл бұрын
@@slack619 First you have to find the master list of phones that are compatible with this drone. I listed the one that I worked from in the comments above.
@Street6996
Жыл бұрын
Thats what i had to do also..
@SelectedResidences
11 ай бұрын
I just changed the USBC to USBC Cable and it worked!!🤩 👍
@TomLeeman
11 ай бұрын
Nice work!
@baldurkubo
2 жыл бұрын
Did you connect your RC-Phone wire to the right socket on the RC? There are two, one works.
@TomLeeman
2 жыл бұрын
Yep I finally got it working
@MrJasonbrito
2 жыл бұрын
It worked lol thanks guys
@michaelmckinstrey2462
Жыл бұрын
Hi there I had the same problem today .I removed the app and reinstalled it and removed my open video cache.That solved the problem
@TomLeeman
Жыл бұрын
Excellent good information we appreciate the tips. Hopefully that will help other people to thank you for watching.
@Chameleon_AoC6033
2 жыл бұрын
damn tom did you realize you never pressed and held the power button on the rc controller yet
@TomLeeman
2 жыл бұрын
Yup I had about 20 people tell me that which helped thanks for the tips I now know how to do it Have fun with your drone and thanks for watching
@user-2df90a0z1
Жыл бұрын
Found the solution! The phone connection port on my iPhone 11 was dirty and full of lint and dirt from being in my pocket all the time so the connection wasn't good. It would charge my phone while plugged into the DJI controller but didn't communicate with it. Pockets are pretty dirty and carry dirt and lint that gets inside the phone's charging port over time. I just wrapped the male end of the charging connector with a tiny bit of cotton from a Q-Tip, soaked the cotton in alcohol, and used it to probe the port to clean it. It worked like a charm after that! I still waited 15 minutes until the stupid "liquid detected" message on my iPhone went away. You probably don't have to wait because mine was functioning perfectly and communicating with the DJI controller after that.
@TomLeeman
Жыл бұрын
Excellent information. Thanks.
@angelmanuelcamacho8690
Жыл бұрын
The rc was off😅
@kurtisa.murray2711
Жыл бұрын
I think y9our actually problem was you never turned the remote on haha. tapping the button once only shows battery level. the lights flashing werent saying it was powered on, it was saying it was charged. gotta hold the button til the lights fill up and stay on.
@kurtisa.murray2711
Жыл бұрын
also your attempt to turn off the drone was wrong too... holding the button once its on only puts it in manual sync mode. to turn either device on or off, you have to tap once to initiate, then hold to power on or off.
@TomLeeman
Ай бұрын
lol thanks have fun with your drone
@tonyfresh1
Жыл бұрын
if your new to this drone here is the problem , the remote is not powered on. just pressing the button once does not power on the remnote. pressing once is to show battery level. you have to push once then press it again for 2 seconds to power ion the remote.If the remote is powered on the green lights will always be on and not turn off. hope this helps anyone out.
@TomLeeman
Жыл бұрын
Thanks for that information and thanks for watching😎🤙
@Roludiseno
Жыл бұрын
UPDATE FROM ANOTHER PHONE. IT WORKED!!!
@TomLeeman
Жыл бұрын
Excellent enjoy your drone
@jeremyboyce1537
Жыл бұрын
Entertaining though , you are an honest Person ! Hahahaaaa .😁😁😁
@TomLeeman
Жыл бұрын
Thank you 😁
@bbarxx
Жыл бұрын
I had the same issue, switched phones. went from a Asus Rog 2 to a Pixel 6 Pro, worked.
@TomLeeman
Жыл бұрын
It’s kind of weird busy it takes a while to initialize but I figured out how to get it turned on one press and then press and hold both the drone in the controller good luck have fun thanks for watching
@AZTEC_ARTS2023
Жыл бұрын
I was having the same issue plugging it into an older iPAD AIR (IOS 12.5.6) 32 GB tablet .... got 2 different USB-C to LIGHTNING cables, and the SECOND one worked ! Here's the Brand : AUTOTECH (Mizco) .... plus, it's a re-inforced / polymer braided / 5-year warranty cable / $20 CAD DO NOT get the "elink PD" cables / brand ... it does NOT work in this situation. Hope this helps
@TomLeeman
Жыл бұрын
That was very technical. Thank you for that information.
@macichiro4817
Жыл бұрын
It worked!! Thanks!!
@TomLeeman
Жыл бұрын
Excellent glad to hear it. Enjoy your drone. Have fun.
@Matanumi
2 жыл бұрын
Oh man..... This guy didn't even bother to look.at the power button on the remote and turn it on 😂
@TomLeeman
2 жыл бұрын
Thanks for watching
@michaelconnor5922
2 жыл бұрын
You got yourself an awesome little unit there. Once you know the procedures. Try turning that remote on. Press twice, holding down on second press
@TomLeeman
2 жыл бұрын
Thanks appreciate it
@benjohnson5445
2 жыл бұрын
@@TomLeeman absolutely useless so you basically say if anyone knows how to get it going to help you out why do you have this posted I'm looking to get mine going not looking to get told how it's not going out already figured out how it's not working
@stevieleep
2 жыл бұрын
For me, when I had this error, I thought my hand remote was on (because the green lights were on) but it wasn’t really on. So, I restarted the controller and made sure it beeped when I started it and then it connected.
@TomLeeman
2 жыл бұрын
Excellent that’s exactly the right way to do it good luck have fun with your drone thanks for watching
@jpbredenkamp5091
Жыл бұрын
Lmao the RC was off the whole time man
@TomLeeman
Жыл бұрын
Thanks I appreciate that
@slick917719
2 жыл бұрын
If you had an SD card inserted into the aircraft while doing the set-up try taking out the SD card from the aircraft and repeat the set-up and the aircraft, software and RC will communicate after removing SD card.. after communication is establish then reinsert SD card and its should read it no problem.....
@TomLeeman
2 жыл бұрын
Excellent Tips and Notes appreciate it thanks for watching
@martindonohue371
2 жыл бұрын
Thankyou very much Jimmy. I got my Mini 2 today and was pulling my hair out for a bit until I read your comment. Seems these little devils don't like some sd cards too, as it won't read a Transcend Premium 300x that I had laying around. It would be nice if they included an sd card as part of the package, especially for the price point, but we live and learn. Took the card out and it connected straight away.
@allfvetizzlest9573
2 жыл бұрын
This was my solution to my problem.
@TomLeeman
3 ай бұрын
True, it does have its drawbacks
@anthonymaduska5483
9 ай бұрын
TY for the info. I've had mine for a year and still won't connect.
@TomLeeman
9 ай бұрын
I just have to make sure the controllers on and also the drone. Good luck. Thanks for watching.
@neillamine
2 жыл бұрын
The solution, very simple, change the cable...! i had the same problem, i did everything, i called DJI technical support, i just change the cable and the problem resolved.
@TomLeeman
2 жыл бұрын
Excellent thanks for the tips
@pinoywanderer8185
Жыл бұрын
Which cable? The one that connects to the phone?
@mightycarver6441
Ай бұрын
finally figured it out, had to switch the usb cord
@TomLeeman
Ай бұрын
Excellent enjoy your drone
@solojoe1193
10 ай бұрын
Actually turning the controller on definitely helps with your problem
@TomLeeman
10 ай бұрын
Thank you, excellent info
@ps5guymn118
21 күн бұрын
On the controller click the power button twice and hold the third til it beeps.
@TomLeeman
20 күн бұрын
Excellent tip
@Fratm
Жыл бұрын
Since this is a year old, I still wanted to comment on why mine wouldn't connect. Seems I had my usb cable plugged into the wrong port on the controller, one port is just a place holder and the other is the actual port.. I plugged mine into the place holder port lol.. Felt pretty dumb after, but now it is working.
@TomLeeman
Жыл бұрын
Glad to hear you got it all working enjoy your drone
@ragekitn232
Жыл бұрын
Lol, I did the same 😂😂😂😂 wouldn’t have noticed it without your comment though 🥴🥴😂😂
@FinnishSoccerman1
Жыл бұрын
I had my Bluetooth off once I turned it on everything started working. Good luck 🍀
@TomLeeman
Жыл бұрын
Good to know!
@asulliv1954
Жыл бұрын
Go outside mine didn’t work until I went outside has to pick up satellites!!Hope it works for you as it did me!!
@TomLeeman
Жыл бұрын
Have fun with your drone and thanks for watching
@Jakeydroney
6 ай бұрын
You saved me ass mate 😂
@TomLeeman
6 ай бұрын
Glad I could help. Thanks for watching.
@ps5guymn118
21 күн бұрын
On the controller, click the power twice and hold a third til the beep
@TomLeeman
20 күн бұрын
That’s it thank you for the tip
@almostabigj
Жыл бұрын
Bro, the RC was off for the whole duration of the video... If the RC is on, it will show green light ... 🤦
@TomLeeman
Жыл бұрын
Excellent tip. Thanks.
@MusicNinja12345
Ай бұрын
Turn your controller on first lol
@TomLeeman
Ай бұрын
Thanks for the tip enjoy the drone
@davidbarter303
2 жыл бұрын
You turn off everything the same way. One short and one long press. The reason it’s getting hot is because it’s just sitting there on the chair. The mini 2 does not have a internal fan to cool it down.
@TomLeeman
2 жыл бұрын
Excellent tips thank you very much I really appreciate it I actually got the thing to work yesterday so I’m gonna make some videos a hat feel so stupid that I couldn’t get something to go but I finally figured it out thanks for watching
@yyohimbe1
Жыл бұрын
Also if you temporarily set the drone down, turn it over on its top. The drone gets very hot while is on if its sitting on the sofa
@judyesquilin6035
Жыл бұрын
I had the same issue. The controller had to be charged. It was very low in battery. I hope you were able to fix it since this video.
@TomLeeman
Жыл бұрын
Yes, I figured it all out. Thank you.
@playstation41
Жыл бұрын
I have the same issue so I just need to charge the controller?
@TomLeeman
Жыл бұрын
@@playstation41 yes make sure that you have your controller charged and your batteries charged. It’s a press press and hold and both the drone and the controller.
@Bigbaza-zd7pj
Жыл бұрын
Your handset turns on same as drone 1 press then a long press 😊
@TomLeeman
Жыл бұрын
Thanks for the info
@sullivanvega5345
Ай бұрын
I've heard that it's not recognizing the port. You need to change it
@TomLeeman
Ай бұрын
Thanks for posting and enjoy your drone
@truettbloxsom8484
2 жыл бұрын
wow, great tutorial, had this problem and you solution worked perfectly, thank you!
@TomLeeman
2 жыл бұрын
Good to hear enjoy your drone thanks for watching
@kiddjubbz
2 жыл бұрын
@@TomLeeman whats the solution?
@vetteguy1647
7 ай бұрын
You have a much better chance of connecting the mini 2 if you power on the controller.
@TomLeeman
7 ай бұрын
So true
@stefla9250
Жыл бұрын
The rc was off the whole time man 🤣
@TomLeeman
Жыл бұрын
That explains it
@TheEclecticAcademy
Ай бұрын
You didn't turn the remote on you have to press it twice.
@TomLeeman
Ай бұрын
Thank you for that info. Enjoy your drone.
@davidbarter303
2 жыл бұрын
your remote is not turned on pressing once only shows how much battery power is left in the controller. quick press the power button than long press the button the same way you start the drone
@TomLeeman
2 жыл бұрын
Excellent that worked thanks!
@fanthonyfictions
2 жыл бұрын
You fucking God among men!
@capeRCouple
11 ай бұрын
your transmitter was not turned on,it is the same as the drone .The power button has to be pressed twice to power it on which you did not have done,you only pressed it once...lol
@TomLeeman
11 ай бұрын
Yes, you are correct sir thank you appreciate it. Thank you for watching.
@Br0wnDogProductions
9 ай бұрын
Turn the controller on. Pushing briefly just show the state of charge of the batteries.
@TomLeeman
9 ай бұрын
Thank you for that tip and thanks for watching
@saltygaming7029
Жыл бұрын
You need to do a short press and than do a long press just like you turned on tue drone and you do it the same way with the controller I hope that you have figured it out
@TomLeeman
Жыл бұрын
Excellent that thanks for watching
@ericjohnson1620
Жыл бұрын
DUD, you have to do a short press then a long press (just like you did on the drone) on the remote. YOUR REMOTE IS NOT TURNED ON.
@TomLeeman
Жыл бұрын
Excellent tip. Thanks for the info.
@Shannongacusana
8 ай бұрын
Press the remote botton the same way you turned on your drone. It’s the same on the controller
@TomLeeman
8 ай бұрын
Thanks for the tip. Happy holidays.
@studiotrics
8 күн бұрын
which world u sir ??? u not switch on the remote ?????
@TomLeeman
7 күн бұрын
Excellent tip thanks for watching
@jeremyboyce1537
Жыл бұрын
It works better when the Remote in on !
@TomLeeman
Жыл бұрын
You are correct thank you
@jeremyboyce1537
Жыл бұрын
@@TomLeeman, well I assumed that after I haven't seen the LED lights on your remote but all is well Sir cause I also realised that this was a year ago , thanks and take care .
@crazyleg2006
2 жыл бұрын
Did you ever figure this out, Tom? It’s happening to me now
@TomLeeman
2 жыл бұрын
Yes I did figure it out you have to push once then push and hold I made a video on it check it out thanks for watching
@crazyleg2006
2 жыл бұрын
@@TomLeeman where can this video be witnessed?
@manushivendra
2 жыл бұрын
Facing same issue , neither connecting not getting switched off properly
@RJO6581
Жыл бұрын
Mine has never worked. I ordered it the day it came out. It’s just been sitting for like 2 years 🤷🏼♂️
@TomLeeman
Жыл бұрын
I had to download new firmware and update the app and then you press once and press and hold on the controller and then do the same thing on the drone and it takes a while for it to initiate good luck thanks for watching
@MgrArmani
2 жыл бұрын
You fixed it? I have the same problem?
@TomLeeman
2 жыл бұрын
Yep I got it working it was one press then a press and hold on the controller and then all the lights blanked and it made some beeping sounds that I did the same thing on the drone and then it paired with a drone but it took a while for it to be able to takeoff so you have to be patient good luck thanks for watching
@johncooper5674
Жыл бұрын
I couldn't connect to the Mini 2 using my Samsung Galaxy Note 10 - no problems previously! So, I changed phones to Samsung galaxy s7 edge & no problems! Updated the firmware, switched everything off and reconnected Samsung Galaxy Note 10, connected no problem! Strange.
@TomLeeman
Жыл бұрын
Excellent glad to hear that you got her connected. Good enjoy your drone.
@FRISCORAY1
Жыл бұрын
Same exact thing is happening to me. It use to work on my old iPhone XR . Then I got a iPhone 13. Have not used drone for months,now does not connect. Crazy thing.
@TomLeeman
Жыл бұрын
I finally got it to connect and so I made a couple of videos on that. Once you do get everything turned on and hook up your phone it takes a while for it to engage.
@stellykostova3348
Жыл бұрын
Hi.. I have a problem, I bought a dji mini 2 combo drone and I can't turn on the camera and sharpness... what should I do, I installed for android 12 and it still doesn't start....?
@TomLeeman
Жыл бұрын
You gotta download the new firmware, and the app update. What’s that on your phone and on the drone you’re gonna press the controller once and then press and hold in the light so I’ll beep then you do the same thing for the drone and then it takes about I would say at least two minutes for it to activate and you’ll see your phone open and then you should be ready to go. Good luck. Thanks for watching.
@crlguitar1
3 ай бұрын
Push the button once quickly, then hold it and the unit will shut down...
@TomLeeman
3 ай бұрын
Thank you for the info
@crlguitar1
3 ай бұрын
@@TomLeeman There's a lot of things I don't like about my Mini 2.... The start up and shut down is one of them. I also don't care for the 'fly' app in general. You MUST log into your account or you can only fly within a few feet of your controller. It's awkward, and you waste a battery preparing to fly.....
@prefix808
2 жыл бұрын
If you've come here looking for a solution, you can skip this video.
@TomLeeman
2 жыл бұрын
To turn it on press once then press and hold you’ll hear a ring or beeping sound and do the same with a drone should work thanks for watching
Жыл бұрын
Boa noite eu me chamo Odair José, sou do Maranhão e o meu drone deu um problema com as mesmas falha desconexão com o dispositivo!
@TomLeeman
Жыл бұрын
Yes, these things are a little glitchy. Good luck. Thanks for watching.
@cnkaufmann
Жыл бұрын
It’s most likely the cable. They wear out in about 6 months. I buy extras.
@TomLeeman
Жыл бұрын
Excellent tip. Thanks for watching.
@earthwormdew9535
Жыл бұрын
You need to press the on button on the controller, then hold it, it will keep blinking afterwards
@TomLeeman
Жыл бұрын
Thanks for the tips
@RiksC80
2 жыл бұрын
Have you tried……TURN ON THE CONTROLLER……..????????????!!!!!
@TomLeeman
2 жыл бұрын
Excellent tip thanks for watching
@user-te9bh6nq9p
10 ай бұрын
I am having the same problem. Damn poor instructions.
@TomLeeman
10 ай бұрын
We have to press once, then press and hold, and that turns on the controller and then you turn on the drone
@richd1054
6 ай бұрын
Turn on your controller!
@TomLeeman
6 ай бұрын
Thanks I appreciate it
@anthonymclennan7773
2 жыл бұрын
ive done evrerything is it a phone setting,theres got to be a simple solution ive had heaps of drones before.do you need wi fi turned on on the phone, how do you activate when the screen doesnt appear and try the linking to no prevail
@TomLeeman
2 жыл бұрын
I have a video on how to download app and how to update the drone itself but to get it start it once you’ve got that all done it’s one press on the controller and press and hold the Controler beeps and then one press on the drone and then press and hold and then it actually takes a while for it to actuate so you’ve got to wait and then you’ll see the takeoff signal on your phone
@anthonymclennan7773
2 жыл бұрын
@@TomLeeman thanks Tom still having grief,I have another go today cheers
@darkfitmc1754
10 ай бұрын
if u would know how to turn on the controller LOL press and hole the power button on controller xD
@TomLeeman
10 ай бұрын
I know right it was a dumb mistake
@frankgaubeca6592
2 жыл бұрын
Your remote is off. Press one time for battery information and a second time for turning on.
@TomLeeman
2 жыл бұрын
Thanks for the tips
@667sept62.
4 ай бұрын
En voyant tous les commentaires qui disent de prendre plusieurs câble de connexion ou d'appeler dji ou faire n'importe quel manipulation ca ne sert à rien si vous avez ce problème c'est juste que ci vous utilisez le câble avec les deux connexions en type C vous avez avez un sence pour le brancher si il et branché dans le mauvais sance sa ne fonctionne pas
@TomLeeman
4 ай бұрын
So you have to turn on your controller by a press and press and hold in the same thing with the drone you want the back of the drone facing you and you have to make sure that you have your app working on your phone it will work good thanks for watching
@drsimonkent
Жыл бұрын
RC is not turned on. Press power-button twice, like you did on the drone.
@TomLeeman
Жыл бұрын
Thanks for the tips
@mrdeanthebean5917
Жыл бұрын
you have to turn your controller on. pews the power button and then press and hold
@TomLeeman
Жыл бұрын
Thank you for that information
@WestVirginiasBigred271
Жыл бұрын
Pres the button on your Rc then press and hold until all the lights go across the same way as on your drone
@TomLeeman
Жыл бұрын
Thank you, thank you very much and thanks for watching
@jdf9742
11 ай бұрын
Turn on the remote controller dude
@TomLeeman
11 ай бұрын
Lol thanks
@jimmypop4001
3 ай бұрын
Try reading the instructions 😅😅
@TomLeeman
3 ай бұрын
Excellent tip thanks for watching
@selimbaccar3622
2 жыл бұрын
i found the solution. had the same probleme on my huawei Y9s. at first it worked fine for a month and one day it just stopped could not connect any more to the drone. i have tried everything, download the dji fly again and again, etc...used other phones, used several different cables, type c to usb adaptors, made sure to do everything i red on the internet and nothing happened. made sure all the batteries where charged, folowed the connection sequence, updated the software, went on the dji help faq, etc....was driving me crazy when i finaly tried on my friends's phone as mentioned as of one of the compatible phones on the dji web site. guess what....it worked and is stilll works perfectley fine.....a xiaomi note 10 pro. why?how? i don't realy know it just works......
@TomLeeman
2 жыл бұрын
Excellent information appreciate all the notes and tips have fun flying and thanks for watching
@bradfordmagnetmansmicroadv2482
2 жыл бұрын
opps lol 1short 1 long press on the remote
@TomLeeman
2 жыл бұрын
Thanks I finally figured it out thanks to you guys answering my question “one quick press and then a long press and then those lights flash thanks again
@Joey_Randazzo
Жыл бұрын
Dude. Your controller isn’t even on. You have to hit the power button once and then hit it again and hold to turn it on.
@TomLeeman
Жыл бұрын
Thanks for the info
@ripsmedia
2 жыл бұрын
You don't actually have the controller on properly, the way you turn the control on is to tap on the power button first and then tap again to turn it all the way on, tapping on the power button one time only indicates how much battery power you have, when you hold the button down after you tap, you'll see that your lights come on and stay on, then you can link the controller to the drone
@TomLeeman
2 жыл бұрын
Thanks for the tip appreciate that information and thanks for watching
@amistadedriankurtn.8898
5 ай бұрын
Dont press your RC just once
@TomLeeman
5 ай бұрын
Thanks for the tips
@lizbethpadilla2620
Жыл бұрын
My problem is that it only connects when I take the SD card out. When I put.the SD card it disconnected. So got a new problem.
@TomLeeman
Жыл бұрын
I have never heard about that before. I will have to do some research on it. Thanks for watching.
@hugolamaire6132
2 жыл бұрын
at 1:30 you didn't put it on, you only show the battery level, you need to make the same as the drone : push then push and hold.
@TomLeeman
2 жыл бұрын
Excellent tip thank you very much
@theroofingcrew5670
2 жыл бұрын
Hey I was having same issue not 15 mins ago, I played with everything, then it dawned on me. Like every other problem I have had with my tablet has led to my VPN. Once I had turned that off I was able to sync and get everything connected. It is the only thing I did differently. And once vpn went back on I had same issue. My guess vpn throws off drone
@TomLeeman
2 жыл бұрын
Thanks for the tips in the notes this thing does have a learning curve but we can figure it out can’t we, thanks for writing and thanks for watching
@alexnvlp
2 жыл бұрын
Man, the controller is off! You have to turn it on the same way you turned the dron on. One push and another push hold
@TomLeeman
2 жыл бұрын
Hey thanks for those tips appreciate it enjoy your DJ Mini 2
@darthfader6835
Жыл бұрын
How about turning on the Controller?
@TomLeeman
Жыл бұрын
Dang thanks
@mycolfire
Жыл бұрын
The plug on the cable is plugged in to the inert side.
@TomLeeman
Жыл бұрын
Thanks for the tips
@SmookyMargiela
Жыл бұрын
I found out it was the cable that was faulty on the controller that connects to the iPhone had to buy another cable
@TomLeeman
Жыл бұрын
Excellent good to know good luck with your drone thanks for watching
@318louise
2 жыл бұрын
The top button where the flashing lights are press once then press again for a couple of seconds it will shut off ..i had the same issue but quickly learnt ..one thing i didnt learn is how to connect the drone to phone
@TomLeeman
2 жыл бұрын
Did you download the app, need that and then once you turn everything on it should connect and you should see what the camera seeing on your phone good luck thanks for watching
@allentownpaguy
2 жыл бұрын
I'm having this issue also. Not connecting to the controller
@passkat
Жыл бұрын
Omg man this is what my mini 2 is like i feel ypur pain.but my controller is on,blue tooth on drone on and sod all happens. Sent about 40 mins on the dji chat got know where... Still not working.using the dji fly app latest model. I have a Samsung a52. It's so frustrating anyone help?
@TomLeeman
Жыл бұрын
I found it you gotta do the press and press and hold on both of them then you’ve got a turn on your app on your phone. Make sure that you’ve got it plugged in all the way and then it sometimes takes a minute or two for that to initialize and to connect. Good luck. Thanks for watching.
@kalumclk3261
Жыл бұрын
i noticed in whole time you didn't turn on the RC
@TomLeeman
Жыл бұрын
Yes, that was definitely the problem
@ignis4026
Жыл бұрын
While you did this whole process you didn't switch on the remote controller...
@TomLeeman
Жыл бұрын
I knew I did something wrong
@rodel2.056
7 ай бұрын
Press rc remote😊 lights and hard there is no light rc remote nee green light on it
Жыл бұрын
Só que estudando bastante percebi que não era fácil, só que há uma 1;30 acredito que corrigir a situação
@TomLeeman
Жыл бұрын
Thanks and thanks for watching
@kenanthonyadiaz2660
2 жыл бұрын
How did you solve it
@TomLeeman
2 жыл бұрын
One press and then press and hold that turned on the controller same with the drone and then it took a while for me to be able to launch it at work finally thanks for watching
@FranciscoRamirez-gb6zc
Жыл бұрын
I think you need to turn on the controller first
@TomLeeman
Жыл бұрын
Excellent tip
@Yolodontfail
2 жыл бұрын
It’s a good try for the new bees. Ive been flying this Chinese junk for years ! There is NO solution I have found that there is no fix for the mini 2 after you firmware update. None. It’s junk. Crap happens. I got my hours… Ps thanks for try
@TomLeeman
2 жыл бұрын
I finally got it working thanks for watching
@joefuent7782
2 жыл бұрын
@@TomLeeman what did you end up doing to make it work? Having the same problem
@jazgulduishenova8717
2 жыл бұрын
@@TomLeeman Could you please tell us what you did having the same problem 😩
@Yolodontfail
2 жыл бұрын
Talked to DJI or a computer that sounded human anyway. They mentioned all the same things we have already done. Useless. Then said send it in. I’m Sure it not free service so I’m buying something new. My advice : don’t upgrade firmware . Mine flew perfect for 4 years prior to that.
@ef7480
2 жыл бұрын
Your'e talking outta ya ass. Everything in the states is from china as you do not produce anything yourselves...
@leonardomonteiro1385
Жыл бұрын
Click fast then hold
@TomLeeman
Жыл бұрын
Excellent tips
@wesleymcauley1384
2 жыл бұрын
dudes controller isn't even on lmao
@TomLeeman
2 жыл бұрын
Press once press and hold lights will beep got it thanks for the tips
@dalepaladin916
10 ай бұрын
Why is this video still up it's useless exclamation
Пікірлер: 371