That's still a super cool workaround to stay economical and keep it simple for you! Thanks for sharing!
@mystic24100
3 ай бұрын
You must have an “open center” valve. It should be a “ closed center “ control valve then you would not need the valve that shuts off the oil to the control valve. Good job for getting it to work. At that time all the other tractors had high volume low pressure. But AC had high pressure low volume hydraulic system.
@fritzhawes1784
11 ай бұрын
Very nice hydraulic setup …….I like seeing the WD still working!😎
@hilbilie4g788
Жыл бұрын
Thanks for update
@benterbieten9540
7 ай бұрын
Nice looking WD.
@floydblandston108
5 ай бұрын
Good job- glad to see an old WD still working. I did basically the same thing when I bought my New Idea 483 in 1992 around when they first came out. Does yours have the gear down sprockets on the main drive? That's why I chose it over the smaller Hesston most people preferred. For dry hay/1st cut it made an excellent combination, but for rowen the bales tended to be more loose than i'd have preferred, and I never tried to make baleage with it- I just didn't see it coming out well. Moving up to a WD45, I could get a tighter, denser bale but still wasn't impressed with the balers ability to make something silage worthy. Can't complain though, since I knew it when I bought it; the local dealer had demo'd it out all summer and the general consensus was that it was 'no good' for baleage, allowing me to buy it that fall for 40% off its list price! With both the baler and the Allis about as 'hi-tech' as an anvil, you should be able to keep them both at work for another 40 years, easy, my only advice would be to ditch those haybines and spend the money on a disc mower. You won't believe how much easier they make everything about mowing.
@ontariovintagetractor
4 ай бұрын
That’s a great story! I’m pretty happy with the combo. I’m on the hunt for a better mower , but these are paid for and work. When the right deal comes along, I’ll upgrade. Cheers thanks for watching
@dustinwhittington3208
4 ай бұрын
Would something like this work to upgrade the hydraulics for my loader, would like to have the ability to tilt the bucket and put down pressure for plowing snow and such
@ontariovintagetractor
4 ай бұрын
It will work , use a single cylinder , and it won’t be fast
@amandanowak5763
11 ай бұрын
where did you get a 1/4 in shut off valve?
@ontariovintagetractor
11 ай бұрын
I didn’t use 1/4 on that it’s 3/8 or 1/2 I can’t remember
@donvoll2580
Жыл бұрын
Good day INteresting. So pump is pumping all the time? Thanks
@ontariovintagetractor
Жыл бұрын
Pump is creating flow on all hydraulic systems all the time, the valve creates the pressure. When you actuate the valve it will go into bypass , then you use the remote lever to run the hydraulics, when not in use I shut it off
@haydenward8285
11 ай бұрын
@@ontariovintagetractorhow did you get the return line to go to the cap? Did you drill into that hex piece or did you get one with it already tapped??
@ontariovintagetractor
11 ай бұрын
This one was tapped when I got the tractor
@haydenward8285
11 ай бұрын
@@ontariovintagetractor do you think it would be easy enough for a guy to tap it himself? or would he have to bring it to a shop??
@haydenward8285
11 ай бұрын
@@ontariovintagetractor how far into the filler neck does the threading go on the inside
Пікірлер: 19