In this video, we will discuss LIVE the E2 error and how you can identify and resolve it. This is a common error that can cause problems with your drivers, so be sure to watch this video to learn how to fix it!
If you are having problems with your CLBIO drivers, be sure to watch this video to find out the most common cause and how to fix it. We'll talk about PELLETS LOADING and how to troubleshoot any problems you may be having. Don't let E2 stop you from enjoying your pellet stove, watch this video and learn how to fix it!
Discover one of the most common causes that cause this ERROR E2 so mentioned and that brings many users of pellet stoves, NEMMAX, DOKII, Extraflame, Albin Trotter, IFLAME and many others that are equipped with CLBIO controllers.
By manual they describe 4 possible causes and all of them are valid, but really in many cases this ERROR E2 is unknown that one of the most common causes is the deficient load of pellets in the ignition cycle of the stove.
Yes friends, really the community of BIOMASS FOR ALL works, and the comments that you leave us here under each video we publish and the amount of messages you send us through our website, helps us to detect and correct in many aspects problems that have easy solutions, and many of them without spending a single Euro on spare parts or costly repairs.
That is why we continue to publish and spread the message of BIOMASS FOR ALL, as a change and we are proud that this family continues to grow, and among all enhance the knowledge and operation of pellet stoves and the most typical parameter errors.
It is important to know each of the ERRORS in pellet stoves and what are their possible causes.
That is why from BIOMASS FOR ALL we always advise you to read the contents of the pellet stove manuals, to know the correct operation of a pellet stove, the possible errors and how to solve them.
If for any reason you do not have the original manual, we have great news for all of you and that is that from January 2023, we release a new download section on our website.
There you can download a huge amount of user manuals for many brands of pellet stoves and we continue to add week after week.
In addition to downloading pellet stove parameters of the most famous controllers and used in the industry of domestic and industrial pellet stoves.
It is simply to enter the user menu of your stove and enter up to parameter 7 and there check what are currently its values.
The process gradually and in several ignition cycles of the stove.
ERROR MESSAGES:
Error E1
This error is due to a flue gas temperature below 40-45°, the probable causes of which may be:
1. Not enough pellet.
2. The worm motor is faulty and does not feed the stove.
Error E2
This error is due to a misfire at start-up. Probable causes may be:
1. The burner is dirty or with hard unburned debris.
2. The ashtray has not been properly installed.
3. The flue gas temperature sensor located on the combustion fan is faulty.
4. The ignition resistor is faulty.
Error E3
It means that there has been a sudden movement of the stove while in operation or the stove has tilted. This error code is programmed mainly for earthquake zones.
Error E4
Problems with the temperature sensor.
Means that the high temperature sensor is faulty.
The temperature is so high that the stove does not work properly.
Error E5
It means that there are some problems with vacuum switch. Such as the door has not closed properly.
The combustion fan speed can not accelerate.
There is some leakage around the stove or the combustion pipe is blocked.
Error E6
It means that the high temperature sensor under the hopper has some problem, such as:
1 . The switch is broken,
2. The temperature is too high and causes the stove to shut down.
Error E7
During operation the stove has stopped due to some power failure.
If you like the information and videos with your simple subscription and alert in the notifications you help us a lot to continue creating quality content.
SUBSCRIBE: / biomasapara. .
www.biomasaparatodos.com
We hope to see you often on the channel and count on your comments to stay in touch and generate great feedback for the whole community.
We believe in change, we are committed to the environment, we make biomass a way of life.
Негізгі бет Ғылым және технология Don't let E2 prevent you from enjoying your pellet STOVE, watch this video and learn how to fix it!
Пікірлер: 34