I have this power supply and its spot on, i have other supply's but i just like the simplicity of this one and i like not needing to use a pedal, its small enough to just put a food bag over as well to keep it clean
@lodarnffs
Жыл бұрын
I had the Critical MNML power supply, wich I lost the power cable to, so instead of buying a new cable around $70 with shipping I bought this for $50. Im waiting for it right now, hope it works as great as the critical which didn’t even show the voltage. Great video btw!
@lukedorrington7455
3 жыл бұрын
I use the small square dragonhawk power supply cannot fault it. It has the constant on function but I have to hold the foot pedal down first then click the button. (although I also have a hurricane just for when I'm building and tuning my coil machines)
@DanielYuck
3 жыл бұрын
Ahhh very very nice bro! Me personally I like this little power supply! It’s a consistent dope little power supply I feel, especially for the prince. Also very user friendly which is a great addition
@HARLINSVIKINGLIFELNC
Жыл бұрын
AWESOME very descriptive video! OKAY..so what exactly does the power supply actually do? What if I already have the cordless Dragonhawk Mast Tour pen.? Thank you. Tj
@user-dq7yd1po4k
23 күн бұрын
Does it have a magnet on the back and is the vibration making it move on the table?
@begoruiz8557
2 жыл бұрын
which voltage you useforline?? greatvideo!
@DanielYuck
2 жыл бұрын
Great question! I use 7.5 to 8 volts depending on what machine I am using. Typically it is 7.5 to 8 volts that I line at.
@KVRB2012
2 жыл бұрын
I need a replacement AC power cord can’t seem to find one not sure if I can use a universal power cord..?? I checked out dragon hawks website no luck
@elfred_brother5855
2 жыл бұрын
saludos cordiales, donde puedo ver escuchar este video totalmente en español???
@alexix3533
2 жыл бұрын
Copia el link de este video ve a google escribes www.youtube.com atento a que no sea la aplicaciónde youtube instalada tiene q ser la de búsqueda) y en los 3 punticos que hay arriba en la derecha lo pones en sitio de escritorio y ahy te da la opción de su títulos y traducción automática y pones español. Listo y de nada Otro tutorial jajajajajaja
@KYDTV
2 жыл бұрын
i'm a newbie in tattooing can you give info about the power supply for RL and M1?thanks in advance
@tonipietarinen1440
2 жыл бұрын
Same power supply works for any tattoo needle and machine. Volts depend machine and personal preference.
@gotink6tattoos561
3 жыл бұрын
How long did it take to get your order from inkclaw buddy
@DanielYuck
3 жыл бұрын
Thats a good one! If i remember correctly it took about 1-2 weeks OR within that time frame. I don't remember the wait being long at all.
@renatamarian705
2 жыл бұрын
Hello, where can i find the cable/plug that goes into the wall? Can’t find it anywhere! I bought this machine in Europe and i need the US plug thing! Thank you
@marcobc9461
2 жыл бұрын
Just look for a DC charger it works with that
@Benny-fc2yq
Жыл бұрын
Mine stopped working :(
@courtneybeverage-wr6yu
Жыл бұрын
I plugged in the foot pedal and the tattoo pen and pressing the foot pedal or pressing the power supply button once does nothing absolutely nothing happens please help me figure out what’s going on
@grandmaazzy999
Жыл бұрын
I have one- I had to hold it down firmly for a couple seconds for it to kick on, it says in the instructions. Then hold firmly for a few seconds to turn off
@HARLINSVIKINGLIFELNC
Жыл бұрын
Allowing me to run without a battery?
@emapalcekova5637
3 жыл бұрын
what type of connector it has for pedal?
@DanielYuck
3 жыл бұрын
It is a standard RCA input. So any pedal with an RCA output will be compatible with this power supply.
@emapalcekova5637
3 жыл бұрын
Thank u very much! Great and really helpful review 👍🏻
@DanielYuck
3 жыл бұрын
@@emapalcekova5637 Of course! You're welcome! Thank you for your support I appreciate you.
@lextertorres-rosas2980
2 жыл бұрын
Bruh mine came with fucking Chinese plugs. So I can't plug it into the socket
@subwooferroads
2 жыл бұрын
I bet the voltage not accurate
@arthurpogue8231
3 жыл бұрын
Noisy compared to your cnc models
@DanielYuck
3 жыл бұрын
May you elaborate for me? I apologize. Are you referring to the M5 Atom Tattoo Machine?
Пікірлер: 29