I thought the height offset with the gas and brake pedal was to make heel-toe easier under heavy braking, you know when heel toe is most useful.
@Stigmaru
2 жыл бұрын
Agreed. Heel toe has always been easier when you're braking and sliding the foot over. Bringing the pedals level could be fine for light normal day driving but might be annoying when you need to heel toe while attacking a corner.
@julyllerena5185
Жыл бұрын
88 989 99ii 88 989 99ii 99999oll09ooiio 99999oll09ooiio es un operativo9o de la lic o8{88
@RennfahrerCembalist
Жыл бұрын
@@Stigmaruthe one solution is just change the master cylinder and make the brake hard as shit so its the same pedal height for both daily and track driving
@Bones12x2
Жыл бұрын
Agreed... The pedal is meant to be lower. When braking they are even. I don't get this mod.
@tims9294
2 жыл бұрын
Clutch spring is a must! Night and day better clutch feel.
@K86UP
Жыл бұрын
Just installed and getting ready to test out. I would suggest to install the Cusco pedal to the stock one while the pedal assembly is off. It will save your neck and about 15 minutes contorting to snug down the hex nuts to the 7mm bolt. As noted you don't need the pedal stopper supplied. It doesnt appear to stress the pedal links when smashed to the floor at 100% throttle. Might want to edit the video regarding this. Great video. Thanks!
@gt4.86
2 жыл бұрын
The versus part brings the gas pedal almost the same height as the brake pedal. I don’t know how you do heel toe with that unless you always blip when you are almost fully release the brake. It’s not gonna be useful for heel toe under heavy braking, especially on the track. Even on the street the stock height difference is already good enough.
@ArchyCr250
2 жыл бұрын
'My heel toe action is really really good', .... Up shifts twice 😄 Tha F
@feelsgoodS2K
Жыл бұрын
This dude is a clown
@NightKidBrandon
Жыл бұрын
@@feelsgoodS2K it’s called *sponsorship* lol paid actor basically
@michaeljohn1160
2 жыл бұрын
I have a 2018 brz and a 2022 GR86. No clue why you feel the oem steering needs to be replaced in 2022? I love the 2022 GR steering wheel. It’s thicker than the earlier model, they used a slightly softer foam and softer leather wrap. Spending $300-$400 for a wheel with suede is a waste. Instead buy the door stabilizers. I have them in my 2018 brz and they are great. They fill the gap between the door and frame. Agree with boost333 on the pedals. The position is fine for heel toe.
@boost331
2 жыл бұрын
Ya'll must have some little bitty feet. I find the gas and brake almost too close together. Heel toe is super simple as is. I do like the clutch spring though. I put mine in with less than 500 miles on the car a few months back. Makes the car much easier to shift smooth.
@kylejones1466
2 жыл бұрын
i have a size 11 shoe and i need to twist my ankle uncomfortably to heel toe. The Cusco pedal was all i needed to heel toe comfortably
@mikecurry6847
2 жыл бұрын
I'm about to put both of these on my car. One thing I noticed in this video, the Verus website says that with the pedal spacer for the 2022 brz/gr86 doesn't need the stop to be swapped out. I'm not sure what the difference is, I'll compare them in a few minutes. But it's in big red lettering right under the description for the product
@86Speed
2 жыл бұрын
Let us know - we can also follow up and see why that would be
@mikecurry6847
2 жыл бұрын
@@86Speed they're definitely different sizes. The supplied stop is a little bit thicker than the oem one but not much really. I left the oem one on for now and I'll just keep my foot off the floor for the time being. I sent them an email to ask for a bit of clarification
@mikecurry6847
2 жыл бұрын
@@86Speed they emailed me back this morning and confirmed that the 2022's don't need the provided pedal stop. Apparently with the aftermarket stop on, you won't be able to get 100% throttle. I'm going to try to figure out why that is because honestly it's not making sense in my head
@86Speed
2 жыл бұрын
@@mikecurry6847 thanks we got a copy of yoru email - we will update our description
@itaybutavia1204
Жыл бұрын
I think the Subaru engineers knew how to place the pedals properly
@Turtleswan
6 ай бұрын
Yep, shit like this is why we laugh at you lot. We know better than the engineers and development team let's fix their mistakes with a shitty metal plate bolted on. Yeah right.
@subuguru3
Жыл бұрын
With this installed on my 9.5 shoe it is still not tall enough. Im not sold on the verus, i think cusco could have made the padding taller. Another 1/4 inch would prolly do it. May jimmy rig it w longer screws and more of that semi foam rubber ..
@oatsfavorite
2 жыл бұрын
Fantastic!
@86Speed
2 жыл бұрын
Thanks - you thinking 22 soon?
@oatsfavorite
2 жыл бұрын
@@86Speed I'm only 50% done building my current platform, can't jump ships just yet ;)
@RippedPantsss
Жыл бұрын
Where did you get the steering wheel suede done at?
@RevolveAuto
2 жыл бұрын
Very nice!
@db_outlaw8278
2 жыл бұрын
I wish they showed the steering wheel being replaced and how to take it off 😕. I haven’t found a video on how to do it and I wanna put my vertex wheel on 😩
@86Speed
2 жыл бұрын
We gotcha - we kinda left that part out
@Its_takaa
2 жыл бұрын
what short hub are you using on your gr86/brz?
@86Speed
2 жыл бұрын
@@Its_takaa - Thats a stock wheel
@Its_takaa
2 жыл бұрын
@@86Speed I was referring to the original post
@86Speed
2 жыл бұрын
@@Its_takaa gotcha the previous hub is the same - the works bell is the crowd favorite
@parvariramin
Жыл бұрын
What change does it make? Is it really worth buying?
@StudlySoldier
Жыл бұрын
Don't attach the cusco pedal in the footwell, it's a pain in the ass. Just remove the 2 bolts and the cable clip attaching the pedal to the car, then take the pedal somewhere more comfortable to attach the pedal cover.
Пікірлер: 36