A little toe-in in the rear will add stability under hard braking (like after a long straight on the track) so "0 toe" is not ideal. A small amount of toe-out in the front can also help with turn-in, but will increase the amount of wear on the inside of the tire. Some alignment shops also add a small difference of toe-in for the front to help keep the car tracking center on the road, which generally always has a small amount of crown to help water run off the road into gutters. I often need to give specific instructions to my shops to give me 0 toe or a small amount of toe-out, but an even amount when I'm expecting an immediate track day vs street driving.
@JoeOvercoat
Жыл бұрын
You can tell them that you don’t want that offset for the crown and they will look at you funny, but they will comply with your request after warning you that it voids blah blah blah.
@donewhiskey
2 жыл бұрын
The Gen 2 BRZ looks incredible
@JoeOvercoat
Жыл бұрын
Absolute delish.
@XxZ1GGYxX
11 ай бұрын
No it doesn’t…
@Chill_Please
2 жыл бұрын
I didn't think I would like these more than the prev gen but goddamn that car is so beautiful 😍
@keithedisonmarquez4271
2 жыл бұрын
Thank you for helpful info. It really help me choosing my fitment as i just got my first brz.
@86Speed
2 жыл бұрын
No problem 👍
@zrob
2 жыл бұрын
So looks like 18x8.5 +45mm should be good on stock! Sweet.
@al3x14
Жыл бұрын
I know this might be a dumb question I also want to go basic mods/upgrades so basically the 18x8.5 rims like the ones in this video which I like with a 45mm tire? I can’t use the stock tires and just switch rims or would I rub and would it not be fitted correctly?
@tims9294
2 жыл бұрын
Thank you for the video! Could you do a video comparing the HKS drop in filter to the K&N filter vs stock? Maybe taking out the charcoal filter as well? Do some dyno runs and check the difference? Much appreciated!
@86Speed
2 жыл бұрын
NOTED
@DriverGuy23
2 жыл бұрын
18x8.5 +40, done! Thanks
@86Speed
2 жыл бұрын
Glad we could assist
@alphabeta8403
Жыл бұрын
Stock height? Got a picture/video of stance?
@LandyG19
2 жыл бұрын
great video. also you can run a less wide tire and the stretch should be just enough to avoid any rubbing.
@86Speed
2 жыл бұрын
Thanks for the info!
@necrolordtv1595
2 жыл бұрын
I have that style lower control arm and I run 18x9 +35 with 1.8 degrees front and -3.2 degrees rear camber no rubbing, no scrubbing. front flush rear nearly flush.
@86Speed
2 жыл бұрын
Anything is possible - Watch our ruined video posted before this one. What is your ride height and tire , these things matter also. There are always 4 things to consider 1. Wheel specs 2. Tires size / stretch / profile 3. Camber 4. Amount of drop and suspension travel and dampening stiffness.
@necrolordtv1595
2 жыл бұрын
@@86Speed 26.25" from ground to fender lip front and rear with Eagle sport AS 235/40r18s
@okthen8445
2 жыл бұрын
Maybe do a similar style video with different tiers of ride height explaining what you need suspension wise the more you lower your car. Daily Street Track Stance
@86Speed
2 жыл бұрын
We kinda did that on our video title ruined. We dumped the GR86 all the way to the ground
@Sookigarage
Жыл бұрын
Tire specs would have been really helpful, at least in the description. If I had to guess, they are probably running a 245/35/18 for option 1, but they would have to confirm. Also, what is the suspension setup on the BRZ for option ? Looks lower than stock.
@harrybuhse8622
2 жыл бұрын
Thank you so much for this video it's been a burning question for me! So if someone was running track camber (-2.4 to -3) then 18x8.5 +40 would be ideal flush fitment? Does that mean you'd be able to fit 255s front and rear or only 245s? My state is very strict so I can't afford to have poke but I'd also hate to have too much tuck as well. Also this is a silly question but does this fitment involve any fender rolling? Thank you 🙏🏻
@DenisDamulira23
Жыл бұрын
255 is too wide. 245/40 is too tall to fit without major adjustments. 245/35/18 works on 18x9.5 +45 with coilovers and no mods
@RR-cg2rq
2 жыл бұрын
What tire size do you have on the 8.5" wheel?
@Sinancan93
2 жыл бұрын
Option 1 definetely for daily use like i am planning to without wild modification on the body and suspension geometry
@tristanhighsmith4034
2 жыл бұрын
Love the video and the channel just wondering if option one is with Coilovers or stock suspension
@chrisgagne6489
2 жыл бұрын
Is option 1 18x8.5 +40 front and rear? Also, how much is the car lowered? This is exactly the look I want.
@MercuryGlide
2 жыл бұрын
Great video, thank you!
@alphabeta8403
Жыл бұрын
1:20 18x8.5 +40 mm ..ideal setup for non-agressive stance. Can you share picture/video of this set-up on STOCK suspension, i.e., NOT lowered? Thanks!
@bigfatdeal5
2 жыл бұрын
What were the tire specs on the first option?
@dloyer4
Ай бұрын
On this, or any other "fitment guide," it would be helpful to know if the car is at stock ride height or if it has been lowered. And if it has been lowered, how much has it been lowered.
@TABRO284
2 жыл бұрын
I want to see some different 17" wheels on the 2022 model.
@cybertroy2
2 жыл бұрын
i reckon this car looks good in white.
@niceprince
2 жыл бұрын
These look just like the Foregestar wheels I had on my Z!
@ravenstylea2
2 жыл бұрын
The 9.5" rear wheel looks great, but it's not ideal for autocross and will hurt your top end on all straights. It also won't help as a daily because the really grippy rear end is no longer playful around turns. The 8.5" wheel is best. Run a spacer if you want to fill that gap.
@alphabeta8403
Жыл бұрын
How does it look on stock suspension? Got a picture/vid/link?
@DIGPLatinodriftking1
2 жыл бұрын
So at what ride height do you start running into this sort of issue as well? And yes I realize wheel width is the biggest factor when dealing with tire to fender contact. So are people dropping down 1" inch? 2" inches? 3"? Personally I'm not a "stance" kind of guy so camber really isn't my taste. Thanks in advance
@willbobig
2 жыл бұрын
Awesome vid! Can you confirm if the first setup (18x8.5) will fit the AP sprint kit designed for this car? I believe the AP fits the stock 18” wheel.
@avery4528
Жыл бұрын
I like 8.5 x 17 with 225 rubber for now.
@ZMacky
2 жыл бұрын
Can u test fit a volk ce28 18x9 +40 255/35 and do this on the 2 finger gap or decent drop not crazy. Just enough to remove the wheel gap
@andrewxu2618
2 жыл бұрын
Hi, when will the 18×8.5 40 titan wheel be available? there is only 18×9.5 on website currently.
@86Speed
2 жыл бұрын
Shoot us a DM on IG - we got ya
@rutleyj
11 ай бұрын
Titan website says 9x18/17 +47 for the gr86 BRZ. Can you please do an updated video with the new recommended size. I'm not sure what tire will fit and what mods need to be done
@jeeps005
2 жыл бұрын
great vid
@jackivan2131
2 жыл бұрын
Cant seem to find the titan wheels in a 18x8.5 +40. I can only find the 18x9 +47. If anyone has a link for the 8.5 it would be much appreciated!
@PBrooksSawyer
2 жыл бұрын
My 18 x 8.5 + 38 wheels stick out more than yours. Not sure whatsup. Hoping these BC racing coilovers I just ordered will have the proper camber adjustment Ill need. Im pretty worried about rubbing.
@chrisgagne6489
Жыл бұрын
+38 should stick out more.
@Yungwalt
2 жыл бұрын
What if you run 18x9’s with a 245/35?
@IcyFrxsty
2 жыл бұрын
could people who may run bags on their 22 brz be able to run tucked fitment with the 18x8.5 +40 wheel and 245 35 18 tire?
@rockcrawlerchurch2976
10 ай бұрын
Im not in the americas, and as such wheel choices here are different without paying stupid markups. I'm looking at running an 18x8. They come in either +35 or +42, i was thinking +35. With the stock 215 on the front and a 245 on the rear. Do you recommend 40 or 35 for the side wall? The suspension is stock ride height. I wont be lowering it, as im 6'4" and only getting older. I probably wont be adjusting any of the suspension or steering parts for the warranty period because its only a street car. I just want to personalise it to my taste. Any help is appreciated.
@GAMERIC5
2 жыл бұрын
Other examples of the 18x8.5 +40ish on stock suspension show the rear being pretty close to flush but the front wheel having a lot of tuck. What has been done to the car in the video? just lowered? spacers?
@86Speed
2 жыл бұрын
Only suspension - we have a video link in this video that shows what we did earlier to this car
@malcansdell5778
2 жыл бұрын
Thanks bro well do ne vid.
@chadhislop4041
2 жыл бұрын
On option 1, what size tires are you running?
@elyssesmagcaling
2 жыл бұрын
are these the older gen titan 7 wheels? did it require any fender rolling?? I heard titan 7 is coming out with a updated version for 2nd gen GR86
@kind1st
Жыл бұрын
I am wondering if I Can Pop Firestone Firehawk 235/40R18 Tires on my GR86.. ON Stock Rims??
@deubyslife7645
2 жыл бұрын
18x10 +25 rear with a 225x40
@86Speed
2 жыл бұрын
make it work - thats aggressive af
@Kaiju.FL5
2 жыл бұрын
How about the front end if you run the 18x9.5 wheels? Do I need some control arms to make it fir with no rubbing?
@gauravawadhwal5988
Жыл бұрын
Is there much difference between last gen and this gen on fitment? e.g. would option 1 also fit the previous gen without modification?
@RR-cg2rq
2 жыл бұрын
Will 255/35r18 tires with 18x8.5 +44 fit without any issues?
@yoojayy8712
Жыл бұрын
That’s a crazy tire stretch
@brandonn2584
2 жыл бұрын
Would 18x9.5 +45 rub???
@joserios2973
2 жыл бұрын
if my 86 isnt lowered can i put the 18x9.5? since its a lil hight off the ground the tire wont rub against the fender…right?
@jl5731
2 жыл бұрын
What about the fronts? Is there no rubbing issues with full lock turn?
@86Speed
2 жыл бұрын
naw
@r6mt09
2 жыл бұрын
Will the 17x9 +37 ts5 fit with stock suspension without any issues?
@chuckd_8905
2 жыл бұрын
.
@Morganotanii
8 ай бұрын
does 18x9.5 rub even with a gr86 at stock height and suspension?
@451jbelen
Жыл бұрын
What about in the middle, 18×9" wheels?
@chrisgagne6489
Жыл бұрын
18x8.5 isn’t available on your website.
@Tastypieinyourmouth
2 жыл бұрын
Thank you for the video, this was extremely helpful! One question though: For people who are opting for option 2, could they also go with thinner aftermarket coilovers instead of aftermarket control arms to fit that 18 x 9.5 wheel with 255 tires? Maybe with a slightly bigger offset? Or to put it differently: Is there a way to fit 18 x 9.5 wheels without exceeding 2.5° of camber AND without having to trim that fender part as it was shown in option 3? And a follow up question: Why is a 255 tire no problem on a 8.5 wheel but problematic on a 9.5 wheel? Shouldn't the tire width be the deciding factor when it comes to fitment, because it is the part that comes closest to the fenders?
@seannguyen2135
2 жыл бұрын
Offset is based off the center of the wheel so 40 offset with a 8.5 pokes out less than a wheel with 9.5 40 off. You need to run more negative offset to make up for the difference.
@86Speed
2 жыл бұрын
Did you watch the ruined video - we explain the 9.5 on or GR86 and where all the issues are in detail - offset and camber and ride height all will play a part
@DenisDamulira23
2 жыл бұрын
With stock power, I'd just run 18x9 +38-42 with 225/40/18 gives a wide stance and speedo stays within specs. Best of both worlds
@oscarpowers4169
2 жыл бұрын
I have 18 9.5 +45 enkeis on 255 ps4s with 2.2 camber all around with no rubbing issues.
@brandonn2584
2 жыл бұрын
@@oscarpowers4169 Can you send me a pic
@oogalee
2 жыл бұрын
How much camber is at the front and rear with the 18x8.5 +40 fitment? The car in the video is lowered so its not completely stock.
@86Speed
2 жыл бұрын
This car is on Coil-overs - watch the earlier video on fitment with the RSR Coil-overs
@alphabeta8403
Жыл бұрын
@@86Speed How low is it compared to stock? Any rubbing?
@rutleyj
11 ай бұрын
Why does the titan 7 have 9 inch wheels with 47 offset listed as the wheel for this car? Will that wit without spacers?
@alexc7864
10 ай бұрын
Yup. I have them and they fit flush.
@Blacklisthgs
2 жыл бұрын
Will the wheels that are linked fit in stock suspension?
@Netryon
4 ай бұрын
It's beautiful outside, but inside something is missing.
@jameisonroyce7550
2 жыл бұрын
What about a 18x9?
@86Speed
2 жыл бұрын
That will fit also - more offset will be needed
@paulshi5974
2 жыл бұрын
@@86Speed Would a +51 offset work for 18x9 on stock suspension? Because I'm looking into the new Advan GT Beyond 18x9 +51 for my GR86. Also, as for 18x8.5, how much play can we have in the offset from +40? Thank you.
@86Speed
2 жыл бұрын
@@paulshi5974 Give a call in to us and we can confirm and get you a great price - Talk to Oscar
@paulshi5974
2 жыл бұрын
@@86Speed Oh sorry my car hasn't been delivered yet haha. I'm getting a bit hyped about mapping out what I want to do to it. But I will come back and give you guys a call when I get the car
@86Speed
2 жыл бұрын
@@paulshi5974 ok. Wheels might take just as long or even longer to get -fyi
@123410tan
2 жыл бұрын
Was wondering what are the tire specs on option 1? Thank you!
@bramiz86
2 жыл бұрын
245/35/18 , was able to catch it one of the scenes
@cody1964
10 ай бұрын
why dont more BRZ owners get the 86 front bumper? Looks a lot better (I am bias as fuck I just bought a new 86)
@pchae1
2 жыл бұрын
I put a deposit down for a GR. When will the 18x8.5 +40 TS5's be released?
@86Speed
2 жыл бұрын
Taking orders now - Please give us a call - Oscar in sales can assist.
@GB-np4pi
2 жыл бұрын
Is 1:51 on stock ride height?
@grantkahale8933
2 жыл бұрын
Anyone know will 18x9.5 +45 on a 245 / 35 / 18 clear without rub or clearance issues?
@86Speed
2 жыл бұрын
Will be safe to trim - it will all depend on your suspension and camber settings , try it out either way.
@brandonn2584
2 жыл бұрын
Yo, Did you find out? I want to run the exact same setup
@NarekAvetisyan
2 жыл бұрын
Can you fit a 295mm tyre on the rear of the car?
@AyyGin
2 жыл бұрын
No lol. People are struggling with 255 and 265s on this new body. You can do 295 if you cut your fenders and go widebody tho.
@PBrooksSawyer
2 жыл бұрын
What are the dimensions of the tire itself? 245, 255, 265?
@86Speed
2 жыл бұрын
245 on that Titan-7 wheel
@alphabeta8403
Жыл бұрын
What is it lowered on and by how much?
@iKoNiiCk
2 жыл бұрын
Is this all aplicable for the GR86?
@86Speed
2 жыл бұрын
100%
@RR-cg2rq
2 жыл бұрын
Bro, it's the same car 😂
@nickjacobsss
3 ай бұрын
Really sucks titan 7 dropped the 18x8.5 spec as shown here. Functionally anything wider than that is just killing performance
@TheG60528XiJinPing
Жыл бұрын
This convinced me the brz looks better than the gr86
@anishnar
2 жыл бұрын
It sounds like 18x9.5 +38 with tires that are 255 is the main rubbing factor. If I got 18x9.5 +38 with 245/40 would I still rub? I’m thinking of dropping the car just an inch.
@86Speed
2 жыл бұрын
In my opinion yes
@anishnar
2 жыл бұрын
@@86Speed Okay yeah I thought it might too. Possibly 18x8.5 +35 with 245/40 or 235/40? Same drop.
@louissenn9897
6 ай бұрын
Im running 18x9.5 +38 but only 225/40 and natural camber. Dropped ~1.5inch Trimmed very little of the fender piece not the full thing and no rubbing
Пікірлер: 117