Thank you again for an awesomely detailed video, going to get this done on the weekend. Love your helpful videos👍
@linksgarage1985
Жыл бұрын
Thanks for watching! I appreciate it. 💪🏼
@capesterr1
Жыл бұрын
Great video as always, Looking forward to Fcr39 video.
@linksgarage1985
Жыл бұрын
Thank you. I appreciate it.
@joshdillon5711
2 ай бұрын
You are the go to guy whenever I even think about doing something to my drz. I’m glad I found your channel man thanks for giving all of us idiots a little help.
@linksgarage1985
2 ай бұрын
@@joshdillon5711 dude I appreciate it!!!! Just some dork tinkering in his garage. Glad it helps!
@prominence2826
Ай бұрын
@@linksgarage1985I appreciate your vids too man, they’ve been a big help for me when tinkering on my 21 sm
@mrsmel269
Жыл бұрын
great diy Link. enjoy the rest of the weekend
@napper1496
10 ай бұрын
Having done secondary air deletes on R1s/zx9rs/R6s etc, not 1 has benefited from it. It doesn’t solve popping etc. 90% of popping and backfiring is down to ovaled emulsion tube/s on carbs or airleak.Secondary air is emission related
@linksgarage1985
10 ай бұрын
Nice!
@dcjano75
Жыл бұрын
Awesome!!!!
@linksgarage1985
Жыл бұрын
Thanks man! Appreciate you watching!
@anuruddhaperera4215
9 ай бұрын
Pair valve Removing , what is the main reson for that , can u give some explanation
@600DoubleRR
Жыл бұрын
Hey Link where did you get those plastic frame guards?
@linksgarage1985
Жыл бұрын
Not sure what ones you mean man. Where at on the bike?
Always so informative and detailed. You make all the DIY mods easier for the other guys.
@linksgarage1985
Жыл бұрын
That’s the idea! I searched for these videos myself and never found ones I liked, so I decided to make them myself. Thanks for watching I appreciate it.
@max.b92
Жыл бұрын
Very nicely done and detailed. Your channel is exactly what the drz community was missing on youtube. Did you really notice any real world difference doing this? A video on the drz locktite fixes would be epic! Would also save your countershaft from premature failure
@linksgarage1985
Жыл бұрын
Thank you Max! And honestly I didn’t ride it very much. I almost immediately swapped to the FCR39 Carb and was busy filming that. But after I rode it all together it sounded and ran fantastic. I appreciate that. And I hope I’m offering something that helps people out there.
@jayminasi6073
Жыл бұрын
why are you replacing the excellent suzuki petcock? you want a pet rock instead? The debil made me say that.
@linksgarage1985
Жыл бұрын
Well Bobby Bouche.. the debil is wrong. 💪🏼
@craigvideos5063
Жыл бұрын
I have a 2016 drz400sm doesn't have any of this.?
@linksgarage1985
Жыл бұрын
Emissions garbage.
@craigvideos5063
Жыл бұрын
@linksgarage1985 also thank you for that detailed Kickstart lever for the DRZ. you definitely gave me the confidence to try to do it myself 🫡
@linksgarage1985
Жыл бұрын
@@craigvideos5063 thank you for watching! Man I hope it helps!
@jayminasi6073
Жыл бұрын
my 2005 400s doesn't have that
@linksgarage1985
Жыл бұрын
Probably added later. To meet emissions shit
@sumokid
Жыл бұрын
I got a 2021 and take it from me. Get that vacuum petcock off there ASAP. That sucker was leaking gas by. I got a Pingel Manuel petcock and it’s perfect. Very heavy duty.
@linksgarage1985
Жыл бұрын
Yep. It’s gone. Installed a manual one. Did it a couple months ago. Didn’t get a pingel. But those are prob the best ones out there. Thanks is for watching. I appreciate it!
@TBOSUMO
Жыл бұрын
How many miles per gallon are you expecting after the FCR carb swap?
@linksgarage1985
Жыл бұрын
Don’t know. I’ve only got about 10 miles on it
@Silojohnson
Жыл бұрын
For the guys removing the pair valve and installing a Yoshi pipe and header Buy a pipe for the older model of drz without a pair valve system. They actually shaped different to clear the valve. Older style pipe looks cleaner. I found out the hard way.
@linksgarage1985
Жыл бұрын
That’s great input. I never knew there was a difference. Thanks for sharing!
@melvinnevarezelmenol6226
Жыл бұрын
that does not affect anything in the engine
@linksgarage1985
Жыл бұрын
Correct
@melvinnevarezelmenol6226
Жыл бұрын
Ok ok i will remove mine from my bike thanks again 💪👌🙌
@linksgarage1985
Жыл бұрын
@@melvinnevarezelmenol6226 very welcome!
@kvnm4850
Жыл бұрын
Hey Link, I really like your videos they are great and really helpful. I have a huge crush on DRZ's but here where I live (Finland) you can't buy new ones only used ones and that kinda sucks, the newest one I found was 2006. But in the other hand these bikes are pretty reliable so that might not be an issue. Next summer I'm going to buy one forsure! Keep it up man, you are the best! 💯
@linksgarage1985
Жыл бұрын
Heck yea!!!!!! Thank you for watching from Finland! I appreciate that. If you ever need any help let me know. Good luck with the DRZ search! 💪🏼
@rotard
Жыл бұрын
Will you be doing a video on the drz free power mod?
@linksgarage1985
Жыл бұрын
I’m not sure. I’ve had several request for that one. I’ll def look in to it.
@brendang5814
Жыл бұрын
So I’m having a problem when down shifting from 3rd to 2nd and the bike going into neutral 9-10 times any idea what it could be?
@linksgarage1985
Жыл бұрын
Worn parts. Bent shift fork. Misaligned shift gears etc. could be quite a few things. If you find out exactly what it is let me know!
@sharpbj
Жыл бұрын
Does that turbo on the bench have a home on the DRZ coming soon?
@linksgarage1985
Жыл бұрын
No. That’s a different project. 😳. Good eye
@kevinkillsit
Жыл бұрын
Is this a new emissions piece? I have an 09, but I have never seen this before. Must be new BS
@linksgarage1985
Жыл бұрын
Newer. Yep. I missions crud. It’s gone. 🤣
@armored-clown
Жыл бұрын
How much would you say doing the pair valve delete got rid of the annoying decel pop? I’ve done all the mods and this is the last thing I have left to do. Full aftermarket exhaust system on mine.
@linksgarage1985
Жыл бұрын
87% for me
@marknewgent8428
8 ай бұрын
is this like an unneeded emissions thing? thanks for the awesome vids.
@linksgarage1985
8 ай бұрын
Maybe.. lol. Thanks for watching I appreciate it!
@77OliverPuller
Жыл бұрын
Just found your channel, awesome job on all the DRZ content.
@linksgarage1985
Жыл бұрын
Thank you!!!!
@maxwell9734
Жыл бұрын
'Passive Air Injection'. Did they have to put that on the bike to make up for the way that they suffocate the engine with the stock muffler and spark arrestor/emissions crap? Or, something else?
@linksgarage1985
Жыл бұрын
The Pair Valve is to passively "Inject" fresh air into the exhaust system at the exhaust port, to cause ignition of unburned fuel vapor *before* it leaves the exhaust pipes, or to thin out the mixture with enough air to pass emissions. It also causes popping and backfiring on deceleration when you jet, and exhaust it.
@busatrx850
Жыл бұрын
Why do you need to change from the vacuum petrol tap and what benefits are gained by removing the PAIR valve
@linksgarage1985
Жыл бұрын
It is. It needed to swap the petcock in this step. However I changed carbs to a FCR39. There is no vacuum port. The vacuum petcock can fail. If there is no vacuum you get no fuel. A gravity or a standard petcock, will always let you get fuel. Plus the vacuum petcocks leak. And the benefit is, decor pop. I explain it briefly in the video
@NFWUGAMeRZonE
Жыл бұрын
Does the vacuum petcock work with that line caped off? Also any decel pops after the install?
@linksgarage1985
Жыл бұрын
Yes. The vacuum works after called off. And no pops on deceleration. I’ve already swapped the petcock, and the carb. No issues.
@georgespoirier481
Жыл бұрын
Awesome! Just got a Keihin fcr39 for mine also. I’m cleaning it and replacing gaskets and rejetting. What kind of petcock did you get, what bike did it came off of? Or is it a chinese part like the fcr carb?
@linksgarage1985
Жыл бұрын
This is the petcock I used. Worked perfect. The fuel nipple points tout instead of down, so just loop the hose and you’ll be good. www.ebay.com/itm/265344699648?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8tjRy9AxRMi&sssrc=2349624&ssuid=fNTislqYQny&var=&widget_ver=artemis&media=COPY
@timothybryant3126
Жыл бұрын
Hey awsome video im deffinatly takung that off putting frame sliders in. Do you no if you can delete the canister under rear fender?
@linksgarage1985
Жыл бұрын
You sure can. But mine didn’t come with it.
@aaronbritt2025
4 ай бұрын
Runs better AND reduces weight.
@linksgarage1985
4 ай бұрын
Fosho
@acuraintegrar5
Жыл бұрын
Great vid man 🍻 thanks again for an easy vid to follow, there is only a few others on this and they are on Australia bikes which have a diff carb and vacuum setups
@linksgarage1985
Жыл бұрын
Thanks for watching!
@Shadow9091
Жыл бұрын
Thanks for the video! Had the same situation on my DR650.
@linksgarage1985
Жыл бұрын
Hell yea. Thank you for watching!
@keldonator
Жыл бұрын
What does that pair valve and parts weigh?
@linksgarage1985
Жыл бұрын
Not sure. 8oz maybe.
@WillMein-ho6hi
Жыл бұрын
Question The pair valve create the vacume needed for the carb? You talk about going to a gravity feed. Is that needed. I just did it and the carb seems like it is not getting the fuel needed
@linksgarage1985
Жыл бұрын
Yes. You can still run factory petcock, but you must cap off the vacuum line. If you don’t, the carb won’t pull fuel.
@WillMein-ho6hi
Жыл бұрын
@Link’s Garage thanks for the info, that's my issue. Great videos, much thanks
@linksgarage1985
Жыл бұрын
@@WillMein-ho6hi for sure. Just cap off that little vacuum port from the line you disconnected from the pair valve and fuel will pull. (A truck if you were ever in a jam, you could probably run on PRI or prime) in this setting fuel continues to flow regardless if vacuum. Let me know if you need anything else!
@MikeNardella-ry4gh
Жыл бұрын
Is there a solenoid you had to take off also or just the pair valve itself? Only cuz I read online you have to delete the pair valve and the solenoid
@linksgarage1985
Жыл бұрын
Nope. Everything I did is in the video. Just the valve itself. Might have a solenoid in a California bike with a canister.
@timbo24
Жыл бұрын
@@linksgarage1985 I live in NV and my 2021 was originally from CA so it does have that rear canister. Can I remove it while doing the pair valve removal or will that screw something up?
@linksgarage1985
Жыл бұрын
@@timbo24 I’m pretty sure yes. But I’ve never done one.
@orwellhuxley6301
9 ай бұрын
Great content man! Thanks for posting.
@linksgarage1985
9 ай бұрын
Very welcome! Thanks for watching!
@CraigSmith568
Жыл бұрын
Are you replacing the petcock because of the carb swap or just to eliminate the vacuum style one? Looking forward to the carb install. You might try taking your sharpie and blacking out the vacuum cap even though that is getting replaced soon. One question, do you have the baffle in the muffler? I would like to change my exhaust, but that is a bit louder than I want. I guess I'm getting old.
@linksgarage1985
Жыл бұрын
Replacing to get rid of vacuum operation. I’ve already replaced the carb and it’s all together. It rips! And yes. It has the baffle in it. Sounded a bit cleaner that way. Thanks for watching!
@NittoSmoke770
Жыл бұрын
@@linksgarage1985 why get rid of the vacuum petcock?
@linksgarage1985
Жыл бұрын
@@NittoSmoke770 the vacuum Petcocks are known to be problematic. And fail/ leak. So I went with a standard gravity style. Plus, the FCR doesn’t have a vacuum port like the CV carb. I could have used the vacuum port on the cylinder, but this was cleaner. And hopefully more reliable. Thanks for watching!
@StreetbeatDesigns67
Жыл бұрын
Hell yeah, I need to do this to mine and I've been putting it off
@linksgarage1985
Жыл бұрын
Easy peasy! Thanks for watching I it!
@skatman3872
7 ай бұрын
What airfilter do you recommend
@linksgarage1985
7 ай бұрын
I have a K&N. But twin air makes some nice affordable ones also .
@skatman3872
7 ай бұрын
@linksgarage1985 Thanks i just bought a 23 drz400 sm,my background is superbikes, ive changing lights,i noticed the muffler is really restricted, are the cheap exhausts on ebay any good ,great video thanks
@terryerickson4697
Жыл бұрын
Nice video! Looking forward to your carburetor video. Where did you pick up your carb? I have been thinking about doing the same but the price for the carburetor is steep
@linksgarage1985
Жыл бұрын
Got an FCR39 slant carb off eBay. It’s a copy. Not an authentic. But the quality actually looks really good. And it came with a great assortment of jets etc. and it freaking rips.
@georgespoirier481
Жыл бұрын
I bought a real keihin fcr39 off of ebay for super cheap. But i have to replace all gaskets. Still worth it for a genuine keihin!
@linksgarage1985
Жыл бұрын
@@georgespoirier481 yea, the genuine article is for sure better. This was kind of an experiment. For $150 what can you make. And so far, I’m impressed.
@OM-sb2bd
Жыл бұрын
Is it even necessary to disconnect the fuel line prior to the other steps?
@linksgarage1985
Жыл бұрын
No. I mention this at 1:37. Don’t need to remove tank or fuel lines. I did because I was doing a non vacuum Petcock, and an FCR39 upgrade.
@OM-sb2bd
Жыл бұрын
@@linksgarage1985 thanks! I’m going to try just adding the caps on the 2 lines while leaving everything else on the bike - just to see if stopping that bit of fresh air into the header makes any functional difference - I’ve got a jetted Yoshi RS2 pipe/header and I’ve heard rumor from some DRZ owners that disconnecting the PAIR system reduces pops/backfires….I guess we will see. 🤔
@linksgarage1985
Жыл бұрын
@@OM-sb2bd it did for me! Good luck!
@omflyer1535
6 ай бұрын
Just got a 22 DRZ sm 5k miles bought it with Yoshi R2 which is the only mod for engine. Noticing in high RPM it surges. Previous owner ran 93 octane, i just filled it with 87. I just found this video and going to do this and replace petcock. Do you think these 2 mods will help the surging?
@linksgarage1985
6 ай бұрын
I don’t think either will help with a surging issue. Is it jetted?
@omflyer1535
6 ай бұрын
No it isn't
@omflyer1535
6 ай бұрын
Reading these posts I've read that having the Yoshi on a stock motor I need to take pair valve off, 3×3, and rejet...?
@linksgarage1985
6 ай бұрын
@@omflyer1535 I would jet it and open the airbox up. It’ll make the world of difference.
@omflyer1535
6 ай бұрын
Right on bro, I'm REALLY appreciative of your help, .... Truly! I'm a newbie to this bike so it's awesome to have your channel. Is there different sizes of jets and what would work with my stock motor?
@Blitzwinger999999999
Жыл бұрын
Hey, I love your DRZ Build series, helps inspire my build forsure. I was just wondering why you did this or what the benifit is of removing this PAIR valve?
@linksgarage1985
Жыл бұрын
Eliminates popping in deceleration. And saves weight.
@linksgarage1985
Жыл бұрын
And thank you!
@jessel1217
Жыл бұрын
@@linksgarage1985 - Did you check your jetting prior? Decel pops happen much more when lean, but barely when properly jetted. Just a thought
@kwood55981
Жыл бұрын
@@jessel1217 most aftermarket full exhaust don't work if you don't remove the pair valve.
@jordan23viera
Жыл бұрын
How much hp you think you’re touching ?
@linksgarage1985
Жыл бұрын
No clue
@jordan23viera
Жыл бұрын
@@linksgarage1985 are you looking to adopt any children I’m just a 30yr old no dad learning on his own lmaooo jk man thanks for the intuitive, visual and descriptive videos
@linksgarage1985
Жыл бұрын
@@jordan23viera 🤣🤣🤣. Nah man. I’ve got plenty of kids already. 🤣. I appreciate you watching and taking the time to comment.
@TBJ_X_VISUALS
Жыл бұрын
Weird mine didn’t come with that on there. Maybe 2018 DRZ didn’t come with it. So the knock off FCR39 slant is worth a try? All I’m doing is wheelies really. How’s the petcock ? Every thing in my bike has been modded besides my carb an petcock. If you think it’s worth it send me sum links brotha. I’m down to try it out. I’d want the exact links from you tho cause I just have bad luck with buying knock off stuff. Great vid brother. Keep it up.
@linksgarage1985
Жыл бұрын
I’ll shoot them your way. I will have videos coming soon. Filmed and ready to go. Detailed install and all parts used etc. the slang Knock off freaking rips. Blast up the front wheel throttle only on 1st and 2nd. Never did that before. Thanks for watching, I appreciate it.
@TBJ_X_VISUALS
Жыл бұрын
@@linksgarage1985 haha wheelies are addictive. I learned on my grom an pitbike. Just remember to keep that foot on that brake no matter what. Kool. I’m subscribed so I’ll be waiting on that vid. Much appreciated 🤙🏽🤙🏽
Man, I've got to get me one of those little grinders! Is that a 'Harbor freight' tool? Can't wait to see what she sounds like with the new carb! 👍
@maxwell9734
Жыл бұрын
@@RJ-li2xd I was referring to the little handheld one, appears to be cordless...
@linksgarage1985
Жыл бұрын
@@RJ-li2xd the bench grinder is a 30 year old craftsman!
@linksgarage1985
Жыл бұрын
The little hand held is a Milwaukee. It’s adjustable. It’s cordless and is a lifesaver for working under cars etc.
@maxwell9734
Жыл бұрын
@@linksgarage1985 yep, I was going to get one, last year and didn't.. had to spend more on feed, and had to wait. But, I'm going to get one. 👌
@linksgarage1985
Жыл бұрын
@@maxwell9734 heck yea.
@arrrahawk
Жыл бұрын
I did the removal and now my bike won’t run It starts on full choke but when I close the choke it dies I completely removed the part from the engine block and used a bought block off plate. If the seal wasn’t tight on the block off plate, would it cause air/fuel ratio to be off? Or if the petcock pipe wasn’t blocked off correctly would cause the same ?
@linksgarage1985
Жыл бұрын
California bike? Have the canister in the back?
@arrrahawk
Жыл бұрын
@@linksgarage1985 New Zealand. What do you mean by the canister ?
@arrrahawk
Жыл бұрын
@@linksgarage1985 bike was perfectly working before I removed the pair valve. I put the pair valve back on and it still wouldn’t start unless it was on prime. I took the pair valve off and installed block off plate But instead of capping the end of the that three piece connector for the vaccum I put the vaccum line from the carb straight to the petcock that way I don’t need to block that part off. Anyway it’s still not starting unless on prime. Will be testing if there is any vacuum pressure . 400SM 2019
@linksgarage1985
Жыл бұрын
@@arrrahawk California and some other models have a emissions canister by the battery box.
@linksgarage1985
Жыл бұрын
@@arrrahawk I bet it’s not getting fuel. Something isn’t right with that part. That’s why it will only run in prime. Because it’s bypassing the vacuum. I’d swap in a standard Petcock (I did this in my carb video) and it’ll work perfect.
Пікірлер: 142