I removed the screws on the battery’s black case but it still not pulling apart. Think they put glue there. How can I open the black case?
@escooterlife
2 жыл бұрын
✅
@ATICrossX
2 жыл бұрын
Almost 3.5 KWh, impressive!
@de-bodgery
2 жыл бұрын
yup...26Ah at 66v or 1.7kwh vs 47.6Ah at 82v or 3.9kwh...slightly better than double the kwh without using more space. *** I had a guy tell me that my pack building was unsafe and sent me a video of an electric bus burning to the ground like that's what my pack would do! OK thanks dude, but I'm going to ignore your FUD! The real truth is he's jealous since he can't build a pack and wants to tear down my work. *** Maybe I'll get to spot weld this thing together over the weekend? The cells are glued together, but I have been crammed for time with other things since I made this video. I was having lots of issues with the 75100 VESC controllers doing motor detection. I think I finally got past that. Now I need to get both controllers talking over CANBUS with the Davega LCD too. It's probably not rocket science, but I've never done it so it's all new to me!
@predator4341
2 жыл бұрын
Hello this is Sam from Chicago I am reaching out to you for advice and Your expertise. Since I leave on the 3rd floor in the apartment building charging the scooter for me it's impossible because I don't have a garage And the weight of the scooter is huge but I can keep the scooter in my car, so The question is Do you think that dual motor scooter with non removable Battery can be customized to remove the battery for charging without taking the whole scooter With me to the 3rd floor. And I Think I have the vision of doing that😃 and I think I understand a little bit but I may be wrong I understand that removing the battery itself it's not enough because there is charging ports and maybe some controller that has to come with it and maybe some Wiring have to be customized And I know that I would have to remove the deck top and all the screws each time that I would like to charge the battery After possible Customization. I see that you have a knowledge about the scooters and you can take everything apart And even make it better, That's why I need your expertise😃 And I would really appreciate if you can give me some points Thank you
@coloasusmc419
8 ай бұрын
How much faster does it go? Where is the speed test?
@andywang259
2 жыл бұрын
Hey there - wanted to ask a question about my Dualtron III battery that's having some issues cutting out after ~1700 miles on it which seems early. Let me know if there's a way I can get in touch! Thanks :)
@de-bodgery
2 жыл бұрын
Look up Rishimaze on DIY electric car. That's me. 1700 miles is probably too soon for a pack failure from age. However there are lots of reasons for why this could be happening to your pack.
@andywang259
2 жыл бұрын
@@de-bodgery awesome - will shoot you a PM there. Thanks!
@de-bodgery
2 жыл бұрын
@@andywang259 LION ought to get you 6000 miles without too much trouble. See you over on my PM's.
@andywang259
2 жыл бұрын
@@de-bodgery that's what I've heard. PM sent!
@alibro7512
2 жыл бұрын
Nice! That should go well. 😀 But will you have space height wise to put padding under the cells?
@de-bodgery
2 жыл бұрын
I'm raising the deck a little. The factory deck design sucks and leaks into the battery box. If I reused the factory deck, I'd be getting water and dirt inside the battery box all the time since that's how they come from the factory. To get a solid aluminum deck that covers the entire top surface and seals up means raising the deck slightly. When done, there will be spacers in places to raise everything evenly across the entire deck surface. This will create a little more vertical space inside the battery box for plenty of padding. Good call on noticing the tight fit in the pack height.
@alibro7512
2 жыл бұрын
@@de-bodgery LOL, sounds great. Looking forward to seeing future updates.
@de-bodgery
2 жыл бұрын
@@alibro7512 THX
@toddtech404
Жыл бұрын
I have a city and barley made it home from a group ride. How much was the cost?
@de-bodgery
Жыл бұрын
I built it myself so that amount is not realistic for someone wanting to buy a new pack. It would be meaningless to tell you since you can't buy one for my cost in cells and other hardware. Never mind that I gutted much of the electrical and upgraded from 16S to 20S and that requires lots of other work to make that possible. This isn't a realistic question for someone that wants to just buy another pack when mine is so many things besides a new battery build.
@user-fi7re1ni5t
2 жыл бұрын
wow that's exactly what i want 280 🔋⋯⋯ but looks like a little dangerous 🥹
@de-bodgery
2 жыл бұрын
Dangerous? Why? None of the cells are spot welded together yet so it's just a bunch of partly charged individual cells right now. Maybe once they are spot welded into a 20S pack, then it will be a little dangerous. I build lots of 82v packs and it's not a big deal. All of the powerful Dualtron scooters run on 20S/82v. Also, this pack won't go in the scooter without electrical isolation and padding around it.
Пікірлер: 20