Bro you changed the oil but you forgot to change the oil filter.
@hxgianni1
8 жыл бұрын
Tip, next time find yourself a piece of two wooden block, place it under the kick stand, so the bike will stay level, and replace the oil filter lol..
@Concordeagle
7 жыл бұрын
So many things wrong with this video. I appreciate you taking the time to share, but in addition to the comments below, use compressed air to clean the mesh filter, not a towel that can further clog the mesh.
@HellfireBeats
6 жыл бұрын
They recommended 4 cycle oil because it's a 4 cycle engine (intake, compression, power/spark, exhaust).
@billvick7011
3 жыл бұрын
I was in the middle of the first oil change I have done on a new to me 2008 Hypermotard where I was going to clean the screen when I realized that I had no idea how to get the screen itself out. As usual, I was working in crappy light and I did not notice the hex inner bolt that holds the screen itself. The Ducati shop manual says, and I quote "Release and withdraw the mesh filter (7)." Zero help. So I tried a few things thinking that it would just slide out if I could get a grip on it when it became obvious that that was not going to work. I didn't hold out much hope since your bike is so much newer than mine but wa-la, there you were with the 14mm allen undoing the inner bolt. I went back to the garage and my 2008 is exactly the same. So big thanks for posting this. Appreciate the help!
@Pierrot0044
8 жыл бұрын
You should remove the other bolt in the middle under the engine which has magnet on it. You should also remove and replace the oil filter.
@gregkhatchatrian4918
7 жыл бұрын
Pierrot0044 I learned from a few mistakes I made changing my oil that one time but the steps taken in this video still got the job done
@savaship
8 жыл бұрын
I like your video, you get the oddball things about the ducati out of the way. Anyone can replace a filter. I liked that you took the magnetic metal catching plug out instead of the actual drain plug, as you have to get the metal flakes off of it anyway, just saved a step. Good video, let me know if you roll through Minnesota, we'll ride!
@ursulacotton3639
6 жыл бұрын
I cannot hear anything cause this stupid music...
@alexkar6958
4 жыл бұрын
Nice effort, but a few questions: 1..should the engine be warm or cold? 2. you do not have torque wrench, but some people do have those, so give the numbers on torque, filter not changed? magnetic trap screw?
@primmo83
8 жыл бұрын
Mobile 1 oil? Why? Ducati recommend Shell Advance or mybe MOTUL! Also is important to change the oil filter! Its cost only 15 buks.
@MyMonster796
8 жыл бұрын
+primmo83 i wouldn't use motul, ive tried it and it cause my clutch to slip. i went on to replace my clutch plates thinking that was the problem and no. i went to mobil 1 and it worked fine. Shell advance is hard to find out here in California but i manage to find some so i'll be going back to that on my next oil change
@8Seven65
8 жыл бұрын
Pretty much no-one uses the shell stuff, a lot of the dealerships don't either. They stick those stickers on when they come to America, from my understanding they don't have them in Europe, probably a marketing deal.
@primmo83
8 жыл бұрын
How do u know? I use shell oil and I live in Eu!
@8Seven65
8 жыл бұрын
I could be wrong, just going by what I read on Ducati forums before I bought my bike.
@TheKaventsmann
7 жыл бұрын
8Seven65 they have the deal with shell and the stickers are on all monsters/scramblers worldwide, maybe on all ducs
@Andi-er7uf
4 жыл бұрын
You forgot the "big black filter" boy. You always change/replace this as well 😁.
@matiasneto1655
8 жыл бұрын
you removed the wrong drain bolt. The drain bolt is the one in the center. Also the oil you picked is 4 cycle not 4 cylinder.
@8Seven65
8 жыл бұрын
What difference does it make which bolt you take out? looked like the oil drained. What's the advantage of using the other drain bolt? If that's not for draining the oil, what's it for?
@AlvaroSanchezChile
6 жыл бұрын
2:46 beware this oil, take a look a how many foam makes only draining. Imagine the foaming while RPM increasing, resulting in a really poor lubing
@iveyfaganjr605
5 жыл бұрын
you have to change the dirty oil but you stick the mess filter into the dirty oil to clean it? and not change the oil filter? I'm not understanding this at all!
@FunWithAJ
5 жыл бұрын
Good call changing that oil it looked horrid. You forgot the filter but otherwise solid video. I only use motul.
@nidansamurai9795
5 жыл бұрын
the bottle states 4 cycle not 4 cylinder
@ALIENdrifter66
8 жыл бұрын
When you say at the beggining the oil it's seeming dirty.... omg do you know anything about engines and oil? because it always gets dirty really fast, in something like 3000km it can be as dark as when it reaches 10000km
@giuseppevenuto3666
7 жыл бұрын
Grande! !!Grazie per il tuo video .Fantastico 👍
@kindajal
5 жыл бұрын
4 cycle as in 4 stroke
@mryugo7829
Жыл бұрын
music isnt loud....
@shahrulnasmi397
5 жыл бұрын
Hi brother, how many liter oil use to change??
@wangjunxin
7 жыл бұрын
It would be better to use a back stand
@bryanlopes3864
8 жыл бұрын
Thanks for the vid! Probably going to order the oil and filter and do this next weekend.
@gregkhatchatrian4918
8 жыл бұрын
Sorry I don't show how to change the oil filter in the video my bike isn't ready for a proper oil change but it's pretty simple unscrew the old one and screw on the new one. Make sure to take some fresh oil with ur finger and lubricate the thread.
@rohansingh9040
5 жыл бұрын
Ducati seems a lot of work from other bikes.
@metaljoe9088
7 жыл бұрын
Turn the fucking music off!!!!
@lralcantara
5 жыл бұрын
wrong bolt, did not change oil filter
@Calisse2crisse
3 жыл бұрын
You need 20w60
@filiplakic5915
2 жыл бұрын
This needs to be taken down, this is not the right way to change your oil. I Appreciate the effort you put to create the video but people are going to mess up their bikes following this video
Пікірлер: 41