Thanks Bub. Gotta modify the office door at the senior citizens apartments where. I do maintainance. Got a hollow core door there I need to turn into a dutch door. Your a big help. Keep up the good work.
@Robinson-Homestead
4 жыл бұрын
Thanks Justin it wasn't hard to do and it's still working great.
@ronsites2694
6 жыл бұрын
Like the door Kevin, Thanks for the video.
@Robinson-Homestead
4 жыл бұрын
Thanks Ron.
@Tryin2FlyII
6 жыл бұрын
It turned out really nice, Looks FANTASTIC! you guys did a Great job! Two thumbs up!!!
@Robinson-Homestead
4 жыл бұрын
Thank you
@SLIDESPOT
2 жыл бұрын
Making a dutch door for my coffee shop. I hastily grabbed a door i assumed was solid wood. We have not cut it yet but my guy was worried it was hollow cuz that would be a real problem. Now i can see it really is not a problem at all. Cool.
@bojackson3073
2 жыл бұрын
Solid doors are super heavy.
@GregAlanEdwardsEmmanuelRidge
6 жыл бұрын
Looks great! I love it when people tell me I can't do something...!!!
@Robinson-Homestead
4 жыл бұрын
Me to thanks.
@anngleason1992
3 жыл бұрын
Thanks for this! I love a good challenge and DIY
@Robinson-Homestead
3 жыл бұрын
You are so welcome!
@Mrchris800
5 жыл бұрын
Looks good, nice process. I’m doing a similar project on my kitchen door soon and your video helps. Chris 🇬🇧
@Robinson-Homestead
5 жыл бұрын
Thank you for watching glad to help.
@ashy1423
6 жыл бұрын
Great job Kevin 👍👍👍
@Robinson-Homestead
4 жыл бұрын
Thank you.
@CalvinDahlberg
11 ай бұрын
Nicely done. Will help my granddaughter and her husband add it to her new house.!!
@Robinson-Homestead
11 ай бұрын
Glad I could help. Thank you so much for the comment and watching.
@gypsy_under_supervised1
4 жыл бұрын
Love this I'm going to do this on my school bus build thanks for the awesome video
@Robinson-Homestead
4 жыл бұрын
It is still holding up great.
@retiredinbali9565
3 жыл бұрын
Nice job. Just a suggestion. That inside door knob is real close to the bottom of the shelf. I foresee scrapped knuckles. I would replace that door knob with a lever style door handle.
@Robinson-Homestead
3 жыл бұрын
Good idea thanks for the comment
@RBPeder
3 жыл бұрын
You rock, this is exactly what I want to do! Fingers crossed!
@Robinson-Homestead
3 жыл бұрын
Thank you and good luck.
@veronicahuerta8058
6 жыл бұрын
FINALLY!!!! EXACTLY WHAT I WAS LOOKING FOR!!!!!!!!
@Robinson-Homestead
6 жыл бұрын
Thanks for watching hope it helps.
@mammybelle7302
4 жыл бұрын
Same..x
@williammcguire3rd
6 жыл бұрын
Good job as always!!
@Robinson-Homestead
4 жыл бұрын
Thanks William.
@jjsiegal1
4 жыл бұрын
Nice work Man...Thanks !
@Robinson-Homestead
4 жыл бұрын
Thank you.
@tessjones5987
5 жыл бұрын
That is a great door! Wish you would come to my house and fix my front door now.LOL.
@Robinson-Homestead
5 жыл бұрын
Thanks for the comment Tess Jones.
@BigDave71
9 ай бұрын
Just needs to be painted white to match the door. 👍🏾. Great video. Thank you
@Robinson-Homestead
9 ай бұрын
I agree!! But it wasn't for me thanks for the comment.
@theomorgillo3209
5 жыл бұрын
Looks good but the top door should have been at least another inch shorter then the bottom for door knob clearance .
@Robinson-Homestead
5 жыл бұрын
Thanks for watching could have used more clearnce my first one.
@chadi7173
6 жыл бұрын
That’s cool. I always wanted one when my kids were younger.
@maxrybold1531
3 жыл бұрын
Nice job!
@Robinson-Homestead
3 жыл бұрын
Thank you Max.
@IndianSpringfield17
Жыл бұрын
Your hired! Please come and do my garage door like this.
@Robinson-Homestead
Жыл бұрын
Lol thanks Kelly, it is not hard you can do it.
@nicoletambasco9210
4 жыл бұрын
Told me I needed solid too...so I bought solid...best video I find is hollow
@Robinson-Homestead
4 жыл бұрын
Thank you Nicole hope my video helped.
@CraneofBoulogne
2 жыл бұрын
That is a nice job, especially considering the cost.
@Robinson-Homestead
2 жыл бұрын
Thank you Jeff
@kennoneya4671
4 жыл бұрын
Really like the project. But I am curious about one thing. If liquid nails didn't exist, would you still be able to do anything? Maybe make an exterior dutch door for a garage that holds a window a/c unit? Now there's a challenge!
@sayloth
Жыл бұрын
How about you go make it.
@vickieroberts2381
Жыл бұрын
I need a door just like this.
@Robinson-Homestead
Жыл бұрын
Not hard to make thanks for the comment and watching.
@thomasarussellsr
6 жыл бұрын
Looks great. I guess whomever is on the other side has the only access to open the top only? Why not have a doorknob in the top too?
@Robinson-Homestead
6 жыл бұрын
That's just what they asked for Thomas.
@Maggie-Gardener-Maker
10 ай бұрын
Nice job Kevin. I did a quick search of your videos looking for the follow up you mentioned to show how it held up over time but I didn't find it, did you do one?
@Robinson-Homestead
10 ай бұрын
It's still works great I need to make the video on that thanks for the comment.
@himynameis7369
5 жыл бұрын
Looks very nice. IYOP would it be possible to use a table saw to cut the wood to fit in the hollow space of the door seeing as I don't have a planer?
@Robinson-Homestead
5 жыл бұрын
Yes you could that would work just as well.
@amybee40
2 жыл бұрын
@Kevin Robinson I'm thinking of doing this with the door to my hall coat closet, but with the knob on the top. The bottom gets hung up on my welcome mat and I really only need the top open to get at coats. I hardly ever use the stuff I keep lower down in there. I was thinking that the latch would be the tricky part, but the type you used looks perfect. Will you come weld a washer on it for me?
@Robinson-Homestead
2 жыл бұрын
Sure thanks for the comment
@kyndalreece8206
4 жыл бұрын
Where are you located? Can you do a couple for me without the table or bar? Need them to keep critters out like another reader. Love it!
@Robinson-Homestead
4 жыл бұрын
PA.
@strongsadventures
6 жыл бұрын
Very nice Sir!
@Robinson-Homestead
6 жыл бұрын
Thank you Billy.
@stunna5vegas398
4 жыл бұрын
Thank you Billy.
@betavicente1
4 жыл бұрын
Muito bom, parabéns
@adrianerhodes1811
4 жыл бұрын
Hey! Just curious how this worked out in the long haul? Never saw an updated video
@Robinson-Homestead
4 жыл бұрын
Working out great I will do that update video thanks A.N. Rhodes.
@williamforsythe5850
3 жыл бұрын
@@Robinson-Homestead I'm about to follow this to make my own, did you get a chance to make the update yet?
@lisaparker865
6 жыл бұрын
fabulous 🙋
@Robinson-Homestead
6 жыл бұрын
Thank you Lisa.
@BrianOfBham
Жыл бұрын
What if you dont have a wood planer? Is there a standard lumber size like a 1 x 1 that might fit inside the door?
@Robinson-Homestead
Жыл бұрын
not sure about that but if no planner you can use a table saw to trim your wood to the size you need , hope this helps.
@4b0d3
Жыл бұрын
I'm going to try this out in a week or so.. Thinking that I may have to shorten the shelve over the knobs, they look, inconvenient to use with the shelf so close.
@Robinson-Homestead
3 ай бұрын
How did it turn out?
@marcosluciosilva2433
3 жыл бұрын
excelente dutch door!
@Robinson-Homestead
3 жыл бұрын
Thank you
@raeannmoldenhauer5641
4 жыл бұрын
Nice job! I want to do this on a bedroom door to allow cats access but not the dogs. How is it holding up? Does there have to be a shelf or could it be smaller? Thank you!
@Robinson-Homestead
4 жыл бұрын
Holding great could be smaller thanks for the comment.
@TMNTsMama
3 жыл бұрын
@@Robinson-Homestead how could it be smaller?
@Raynestorm1968
4 жыл бұрын
Looks great, I just have one small criticism. The door knob looks very hard to use on the front side. Looks like it will be hard to get your hand in there and turn it to open it. I can see lots of skinned knuckles. I think if I use this build I am going to have to bottom half higher to allow more room for the door knob. Thanks for the video though. It answered some questions I had about how to fill in the hollow ends.
@Robinson-Homestead
4 жыл бұрын
It would be best to leave more room that was the first one I built.
@Raynestorm1968
4 жыл бұрын
@@Robinson-Homestead actually, I was just browsing pics of Dutch doors and I found one I really like that has a shelf that sits right in the middle so there is some sticking out both sides and it's cut narrower than the door, so the door knob is free and clear. Pretty damn good for your first build. I hope I am lucky enough to have mine come out looking half that nice. I will be building mine next week, wish me luck LOL
@raeannmoldenhauer5641
4 жыл бұрын
RayneStorm how did it go?
@jkitchens71
5 жыл бұрын
What was the point of mounting the top hinge up side down? Shouldn't the pin have been facing the other way?
@sheilabowers7532
6 жыл бұрын
Job well done oh buddy G-man out
@Robinson-Homestead
4 жыл бұрын
Thanks G-man.
@MrMuppetfan
5 жыл бұрын
Ever consider using pocket screws to attach the two boards prior to sliding into the door? Allowing for a top with no screws visible.
@Robinson-Homestead
5 жыл бұрын
Good idea thanks.
@JCraftvfx
4 жыл бұрын
how would you handle the opposite of this, turn a dutch door into a regular door? I've got a dutch door in the house we bought and I think it's stupid
@Robinson-Homestead
4 жыл бұрын
Just screw it together Jason.
@TMNTsMama
3 жыл бұрын
Sell it for what you want a new door costs. I'm sure you'll find someone who wants it and will pay for it.
@mary8273
Жыл бұрын
I think you should taper the wood you stuck there.
@Robinson-Homestead
Жыл бұрын
Thank you for the comment.
@carolynjoy2074
4 жыл бұрын
Great Job, Its been a year how is it holding up.
@Robinson-Homestead
4 жыл бұрын
Holding up great it does gets a lot use for sure.
@stevesautorepair
Жыл бұрын
You seem to be pretty accurate with everything but why on earth did you put the hinge on upside down, head is facing downward and will work out. Did you pop the pin out of the hinge and turn it or leave it that way?
@Robinson-Homestead
Жыл бұрын
I fixed them thanks for the comment.
@stevesautorepair
Жыл бұрын
@@Robinson-Homestead 👍
@brianpruitt1015
Жыл бұрын
I'm sure you had to chisel out the door frame for the new hinge. How did you get it to line up before drilling holes in frame for new hinge?
@Robinson-Homestead
Жыл бұрын
I bolted one hinge on the door frame and traced the other one then removed the door and cut for the hinge
@ra3975
Ай бұрын
Whats the point of the shelf between the door sections?
@Robinson-Homestead
29 күн бұрын
For paperwork.
@aleeawatson5499
5 жыл бұрын
How is it holding up?
@Robinson-Homestead
5 жыл бұрын
Using it everyday and it's holding up just fine thank you for your comment.
@allenyates7384
5 жыл бұрын
How much would something like that cost to get done?
@Robinson-Homestead
5 жыл бұрын
I think round $40 not for sure.
@clearladymoon
3 жыл бұрын
I want a dutch door on a budget so how is it holding up?
@Robinson-Homestead
3 жыл бұрын
Holding up great and it's used everyday thanks for the comment.
@tulelazule6914
2 жыл бұрын
couldve used much smaller "brackets" under the door. If it needed braces how come not just some small wooden "triangle-cubes" under the shelf, like about 2 inches thick or some pre-fab molding for underneath? this "dutch door "may be functional but not very attractive in the quaint old style. Those little shelves are usually on both sides.
@Robinson-Homestead
2 жыл бұрын
I just build it the way they asked me to thanks for the comment
@S-pq9st
3 ай бұрын
Good job but one thing you didn’t do you should’ve showed the people what to do with the frame for the hinge specially, if the frame is metal because then you would have to cut the Door side out twice as deep to make up for the hinge sticking out
@Robinson-Homestead
3 ай бұрын
Thanks for watching.
@michaelparker5030
Жыл бұрын
😎✌️
@Robinson-Homestead
Жыл бұрын
Thanks Michael.
@mfamus2272
3 жыл бұрын
What size wood you use for the shelf??
@Robinson-Homestead
3 жыл бұрын
1 by 6
@Robinson-Homestead
3 жыл бұрын
Thanks for the comment and watching Earl the door is still in use today and working great. That was a 1 by 6 oak wood.
@KylixTheFur
2 жыл бұрын
2:09 🤣🤣🤣🤣🤣🤣
@Robinson-Homestead
Жыл бұрын
Thanks for watching.
@bojackson3073
2 жыл бұрын
Handle looks like it's in an awkward position.
@Robinson-Homestead
2 жыл бұрын
It is in an awkward position could use some improvements
@roseartistco6156
Жыл бұрын
What is the name of your 2 part epoxy you use?
@Robinson-Homestead
7 ай бұрын
Any 2 part epoxy will work.
@pepper4985
3 жыл бұрын
Update?
@Robinson-Homestead
3 жыл бұрын
Still holding up working out great
@loneranger5349
Жыл бұрын
The lock on outside?????? It looks good but the lock on outside. This must be an inside door.
@Robinson-Homestead
Жыл бұрын
Yeah it is an inside door, thanks for watching.
@superpac1966
6 жыл бұрын
With all the glue. Why not just clamp it up to dry and not face nail it. The surface sheet is so thin it probably won’t hold very well anyways. Plus no nail holes to fill.
@Robinson-Homestead
6 жыл бұрын
Thanks for the comment I will do a update in one year superpac1966.
@wildwillly
5 жыл бұрын
Who said this couldn't be done? Stop being ridiculous
@normanlace3655
6 жыл бұрын
Hinges upside down
@Robinson-Homestead
4 жыл бұрын
Thanks for the comment.
@Barnowl448
Жыл бұрын
Idiot , epoxy on upside down hinge.
@constantreader7944
5 жыл бұрын
I can’t believe you would not just purchase a new solid door instead and cut that. All the labor you’re doing -woah - just to rig a cheap hollow door! Why? Me personally, I wouldn’t. I mean, this is interesting, but a solid door couldn’t cost more than $80-100
@Robinson-Homestead
5 жыл бұрын
Just doing what I was asked to do.
@1982MCI
4 жыл бұрын
You haven't priced solid wood doors lately I see. A pine solid core door is now almost $250!! That may be a big factor to a huge number of folks
@TMNTsMama
3 жыл бұрын
A hollow door is sturdy enough but also lightweight enough to not tear out of the frame. Plus if that's what you have it would be more cost effective. It's not like it's an entrance door to the house, just to the basement.
@S-pq9st
3 ай бұрын
Then you gotta cut up the all the hinges cut the door knob out also got paint the door
@tkitty4ever
3 жыл бұрын
Pathetic and amateurish. You should check This Old House and see the correct way to make a Dutch Door. Sad !
Пікірлер: 139