Dyness B4850, standard 19 inch design. Easy to stack up in brackets or cabinets, excellent performance in wide range temperature, compatible with leading inverter.
Hi I have a question that I didn't find in the installation manual and wanted to ask if the Dyness B3 battery can be installed upright instead of flat Thank you
@DynessBattery
4 жыл бұрын
Yes Kris, B4850 can be installed vertically.
@williamh.2982
3 жыл бұрын
I live in USA are they sold here? Can you give website ? Do you have 48v Thank you
@DynessBattery
3 жыл бұрын
Hi William,thank you for your attention. For more information please visit us at:www.dyness-tech.com.cn, we have various 48V battery solutions.
@ianwynne5483
2 жыл бұрын
Hi there, I have two 2.4kWh dyness batteries installed 6 months ago and I have never seen the batteries discharge below 80% . I have a Solis inverter which I reset to factory settings but the batteries still do not discharge below 80% . I see from the comments that you say each battery has BMS software is there a way I can reset this software, I was also thinking about a forced discharge of the batteries to see if this removes the impediment to discharge. Aside from the ettings on the inverter is there another way i could force a discharge of the batteries. Thanks for the video.
@DynessBattery
2 жыл бұрын
Hello, Ian. Sorry for missing your comment ,did your problem get resolved? If no, we can help you contact our aftersale service
@inputvol.280
7 ай бұрын
and? I think you didnt set it right
@chinnchao5948
4 жыл бұрын
Awsome!!!👍
@DynessBattery
4 жыл бұрын
Hi, thank you for your comment.🤝
@DynessBattery
4 жыл бұрын
Thanks Chinn :D
@DanDan-dn5lt
3 жыл бұрын
Hi Do you supply to European countries such as Republic of Ireland? Thanks.
@DynessBattery
3 жыл бұрын
Hi Dan, We have distribution network in European, for more information please contact us by email: sales@dyness.net, can quickly introduce you to local partner. Thank you.
@ianwynne5483
2 жыл бұрын
Solar failte in Shannon sells the dyness batteries
@lesliepieterse1072
2 жыл бұрын
I have purchased the B4850, and excellent build quality. What size circuit breaker is used between battery and inverter? thank you .
@DynessBattery
2 жыл бұрын
Hi Leslie, thank you for your praise of our batteries. Choose circuit breakers size should consider the battery's discharge power and the inverter's power, please send us your configuration information via Facebook message or write to sales@dyness.net.
@lesliepieterse1072
2 жыл бұрын
@@DynessBattery I have the 5kw growatt inverter and 8x 455watt Canadian solar panels connected in series with the B4850 2.4kw battery.
@DynessBattery
2 жыл бұрын
@@lesliepieterse1072 Hi Leslie, our after-sales engineer has already replied to you via the e-mail you left, please check, thank you.
@zachary261
2 жыл бұрын
Does the B4850 have built-in BMS?
@DynessBattery
2 жыл бұрын
Hi Nathan, thank you for your message, every B4850 has built-in BMS.
@morenabalatseng8003
2 жыл бұрын
Do you need racks if you use a cabinet?
@DynessBattery
2 жыл бұрын
Hello, B4850 is a battery module, Rack is possible to assemble from the battery module, you need to customize the rack according to the size of the battery module. If you would like to purchase or have other questions, you can send an e-mail to us: sales@dyness-tech.com.
@aitoryt7491
Жыл бұрын
is it possible to connect a Dyness b3 battery in parallel with a Dyness B4850 battery?
@DynessBattery
Жыл бұрын
Hi Aitor, thanks for your comment. Different battery types cannot be connected in parallel
@peterk9797
2 жыл бұрын
Hi I have 2x2.4 dyness batteries and Solis RHI-6K-48ES-5G inverter, getting ,,Can communication failure,, message. I think it's the dip switch settings but I'm not sure where to find it how to set them switches correctly?
@DynessBattery
2 жыл бұрын
Hello Peter, we're sorry for the late reply. Did your problem get resolved? If not, please let me know, we 'd love to help you.
@bertcywayne8051
Жыл бұрын
is it normal that the battery soc green LED indicator of each battery does not flash the same? I have set the DIP switches just as you have shown on a Dyness BX51100 5,12KWH parallel system of 3 batteries
@DynessBattery
Жыл бұрын
Hello, Berty. I have received your questions, and I need to ask our After-sale, then I will give you an answer. Or you can send me a message on Facebook(Dyness Battery), thank you!
@bertcywayne8051
Жыл бұрын
@@DynessBattery thanks a lot Dyness Battery. I think answering here might help somebody else in the future not only me.
@DynessBattery
Жыл бұрын
@@bertcywayne8051 Hello, you make a good point, and sharing it does help more people. But usually, the problem is complex and it is difficult to judge and solve in a short time with just a written description. In order to solve the problem more efficiently, we welcome you to send us an email to our after-sales service email address: service@dyness.net. We welcome your experiences once the problem has been solved and look forward to hearing from you.
@azeemcassim9366
11 ай бұрын
@@DynessBattery Hello. I have a 7.2jw Synapse Inverter with 2 Dyness batteries working well. I have a 160A Fuse on the Positive side of battery. Question I want to add 3rd dyness battery. Can I just connect the number 3 battery In parallel and add communication cable and earth or Do I need to make other changes to my DB Board or add any other Fuses and Busbars first? Pls Advise. Thank you
@DynessBattery
11 ай бұрын
Hello, please tell me the model of the battery and the power of the inverter, we will answer this question for you.@@azeemcassim9366
@korneldemeter837
Жыл бұрын
good afternoon. I have 1 Dyness B3 4875 battery, it comes with a Sorotec revo 2 inverter. What DIP position is right? there are com cables for several types of inverters (victron, axpert, etc.) which one is suitable for the revo 2. Thanks
@DynessBattery
Жыл бұрын
Hello, thank you for contacting us. Please push the"3", 0010.And you need to use a custom network cable with 3H5L cable sequence. Those three brands are compatible with Dyness B3. If you have any questions about installation operation, please contact our after-sales service:service@dyness-tech.com.
@korneldemeter837
Жыл бұрын
@@DynessBattery thank you
@DynessBattery
Жыл бұрын
@@korneldemeter837 You're welcome, we hope that's helpful for you!
@Didewro
4 жыл бұрын
Where can i order 12v or 48v versions.
@DynessBattery
4 жыл бұрын
Hello Destaye, we have distribution network worldwide, which country you are from, can quickly introduce you to local partner.
@sergioacecaballes1113
3 жыл бұрын
how many watts per module??
@DynessBattery
2 жыл бұрын
Hi Ace,the Dyness B4850 battery module capacity is 2.4KW/h, find more information please visit:www.dyness-tech.com.cn
@davidfair
3 жыл бұрын
I would like to buy this module for my 4 us3000 batteries can you put a link to your website.Thank you
@thomassun5904
3 жыл бұрын
www.dyness.net/
@DynessBattery
2 жыл бұрын
hello, welcome to buy our battery. You can buy it from our official web: www.dyness-tech.com or sales@dyness-tech.com
@adylermontejo6043
2 жыл бұрын
compatible for sma sunny island inverter this battery
@DynessBattery
2 жыл бұрын
Dear Adyler, we 're very sorry for missing your comment.Yes, SMA is compatible with B4850
@bmdisenoypublicidad3250
Жыл бұрын
donde puedo conseguir una tabla de errores de la bateria dyness 48100
@DynessBattery
Жыл бұрын
We are Sorry for the Late reply. Usually, in the user manuals of our battery products, there are ways to deal with common and relatively simple error problems. If you cannot find it in the user manual, please contact our after-sales team:service@dyness-tech.com to resolve it for you.
@DynessBattery
Жыл бұрын
If you need the user manual of A48100, please write me: samanta.he@dyness-tech.com❤
@r3v0l98
4 жыл бұрын
isn't this PylonTech?
@DynessBattery
4 жыл бұрын
Hi Teodor, Dyness is a battery brand specialize in Residential and CI applications for years, a wide portfolio range can be found in our website, please check, thanks.
Пікірлер: 52