Who has more experience with this engine? Honestly, this is priceless stuff.
@thrash1337
Жыл бұрын
Private lessons from one of the best M156 technicians in the world, can't thank you enough!
@Leonardo555ZZZ
4 жыл бұрын
The Master and the apprentice... Well done...
@donhanley1339
4 жыл бұрын
A great teacher for the next generation just like my old journey man.
@donhanley1339
4 жыл бұрын
I would think that Tasos is Merceds trained
@samfitzpatrick4714
4 жыл бұрын
Such a professional 👏 As always Tasos, perfect workmanship,, i wish your garage was closer so I could bring the C63 for check up.✅ 👌
@tylerthomas9567
4 жыл бұрын
Thank you so much for posting this video! I was always planning on doing this myself on my C63. This video gives meh much more confidence!
@bigbird2100
4 жыл бұрын
Great video 👍 Tasos teaching the next generation , it's all about the Details and the feel of the hand tools.
@amersingh2557
4 жыл бұрын
Best video explanation. Think the hand held camera shows more detail than the go pro, plus having a hot battery on the forehead is not a good idea.... so be careful..💥
@ohmfab
4 жыл бұрын
Such great detail as always!
@alexthetic
4 жыл бұрын
This makes me want to try doing it myself with my m156 lol
@donhanley1339
4 жыл бұрын
You need to get the Lock tools for the cams and the work shop manual which you can down load
@somereal678
3 жыл бұрын
@@donhanley1339 link for manual plz
@Jason-Jason
4 жыл бұрын
Excellent work! Keep the AMG videos coming!
@mcfly3892
4 жыл бұрын
thanks for this explanation. I love you. wish you the best for you and your family
@jason.wilberger2969
2 жыл бұрын
Expert builder... I appreciate you Tasos.
@chrisej5987
4 жыл бұрын
O my gosh this is amazing! Thank you!
@drifter2090
Жыл бұрын
Hey Tasos, you forgot to show how to align the camshaft when there's no room to fit the 27mm wrench with the power brake unit there, great video still!
@edrieahmadi6907
4 жыл бұрын
very great video, as always. but this time you did not use oil, when you installing the new camshaft or hydro tappet. or did I miss that in the video?
@sciroccoR
2 жыл бұрын
i like this very much. i also really like your explanation of the order of removing the camshaft bearing (girdles, whatever). i am curious, though, if you find that your cam is OK but lifters are kind of no-good, do you need to remove the camshaft adjuster before removing it from the head? thanks! also, could you tell me how many hours you charge for this?
@andreaparas7855
2 жыл бұрын
Μπράβο Τάσο. Είσαι ωραίος. Φιλάκια from Australia 🇦🇺
@andreaparas7855
2 жыл бұрын
You just saved me so much time My.mechanic is getting Lazy. I took your info and told him what should be done!! 😁
@ph7092
22 күн бұрын
Hey Tassos thanks for the video. What could be the reason that I cannot turn the camshafts after i put the engine on 40 degrees.
@robertocabiati493
4 жыл бұрын
Thank you Tasos! The video was amazing. Any chance your go pro has a defect? 55 degrees is not normal. Be careful the battery may have a thermal runaway while you are wearing it..
@TasosMoschatos
4 жыл бұрын
I'm planning to buy a new battery and check the temperature again. Thank you
@nedlles123
2 жыл бұрын
I have replaced the lifters on left intake camshaft. I used tools for both cam and adjuster. Now I have check engine light (yellow) when I started it up. The engine runs as it should and sounds normal. Can it be that I have to make calibration for the camadjuster?
@davidthompson2761
3 жыл бұрын
First off thank you but why no assembly lube?
@sauhaw534
Ай бұрын
How do you prime lifters ?
@ahmedomari9009
4 жыл бұрын
How much for the brand new camshaft?
@chrisej5987
4 жыл бұрын
Why do you install the camshaft holding tools (front bridge and rear flat bar) if you are just going to pull them out to remove the camshafts?
@TasosMoschatos
4 жыл бұрын
If I don't install the timing tools there's a chance to turn the engine from the camshafts since there aren't spark plugs in place, by turning the engine from the camshafts ( not so clever ) first you compress the timing chain tensioner and second you put lots of stress everywhere since has 2:1 ratio. Any how personally I prefer to spend 10 more min and to have piece of mind than spending 30 min and turning 10 times the crankshaft to fix the timing properly.
@tysonfollett6124
4 жыл бұрын
Tasos Moschatos I’m curious on how you fix the adjusters little compression spring I heard you say you will use packers or do you change out that spring. Also why in the hell haven’t they fixed the factory fault of not making sure lubrication holes are drilled out properly on the camshafts
Пікірлер: 36