The camera is adjusting it's exposure to the sky. It needs to be shaded, perhaps? Or maybe tilted slightly downwards.
@MrLootshoot
7 жыл бұрын
Merry Christmas and a Prosperous New Year Andy..
@AndyRCchannel
7 жыл бұрын
merry xmas Tony thanks for watching
@stridermt2k
7 жыл бұрын
Seeing as my AIOs consist of the fat heavy old EF-01 I may have to look into this! Merriest of Christmases, Andy!
@AndyRCchannel
7 жыл бұрын
Merry Xmas Michael yes its a nice one although i like the ef01 with the case off
@davidc5808
7 жыл бұрын
+AndyRC I love your vids! I am about to get into fpv and I have a quick question. How do I connect my transmitter and reciver for fpv? Do you put them in the same band, or do you need the same brand electronics? Im just confused
@gurisler3622
6 жыл бұрын
Thanks for the review. Like your channel a lot. One question for this camera: can you change the lens for a narrow fov version? Is it moddable? Also looks like there is a newer version tx05 would be nice if you can compare that one with this. Thanks
@mohemahmoude3356
5 жыл бұрын
THANK YOU SIR ,can i use them withe eachine ev800 goggles"without extra tools" ,and what's the characteristics to see to decide if this camera is suitable for my goggles or not
@anzaeria
4 жыл бұрын
Just wondering how many pins the camera's battery connector has? I know it's a Molex 1.25 and they can have various different numbers of pins.
@jamesperkins5632
7 жыл бұрын
hi Andy I bought one of these and wanted to use it with my xk 5.8 screen but can't get it to work. Do I Need to know the frequency and band of the display screen to use it?
@airmyngarage
7 жыл бұрын
all the best wishes Andy. some excellent content.
@AndyRCchannel
7 жыл бұрын
Thanks a lot Phil merry xmas
@Graybear78
4 ай бұрын
Good video! Thank you. I was looking at this camera earlier. I am new to FPV, and have a question, please. I want to put FPV on a fixed wing aircraft. Is the transmitter included as one piece, like the RunCam Spotter, or do I need to purchase a transmitter? Comparison videos indicate the Eachine is a better picture. If so, what transmitter would you recommend? Sorry, total ignorance here. Thank you for your time.
@AlbertKimTV
7 жыл бұрын
Merry Christmas and Happy New Year Andy!
@AndyRCchannel
7 жыл бұрын
Merry Xmas Albert thanks for the great videos
@alicekey8928
6 жыл бұрын
Ladies and Gentlemen! I found it for 22.99 dollars www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?p=B4200913385416201708 Sweet kzitem.info/news/bejne/xqiJmYx5cah1h3o
@thelongranger55
6 жыл бұрын
AndyRC can you use 72 chan camera with a 40 Chanel goggles
@centralfloridalawncare8373
7 жыл бұрын
I recently purchased this camera with the eachine goggles 2 and cannot get them to work. any suggestions
@ggjflyguy
7 жыл бұрын
Hello Andy, do you think this would work good on a micro RC like a Mini z style car.
@acesonthego2287
7 жыл бұрын
I Could Definitely Use That Cam AndyRc, Good Job with the Review, and Happy Holidays
@AndyRCchannel
7 жыл бұрын
Cheers Aces! thanks for watching and commenting this year
@fa300ry
6 жыл бұрын
What is the best way to install this camera on the plane as it generates so much heat
@sqwert654
7 жыл бұрын
It's perfect for my backyard 150 brushless with 3" props
@giusseppeprtronis1852
7 жыл бұрын
Hi man. I dropped accidentally to the floor and lens unglued from camera perfectly....what a mess. One question, It's my first fpv cam, i notice it focus better to half a meter distance rather to infinite or outdoor flight. Can you clarify?. Thanks!
@eroticmasterbaker
7 жыл бұрын
FYI I have been flying the TX02 (200 mw cam) with my Eachine 010 and have gotten over 3 minutes flight time with stock batteries, although sometimes it does struggle to lift off. Ambient atmospheric conditions may be to blame.
@ukispooki8348
7 жыл бұрын
Hi, I'm pretty new to FPV and drones. Can you please tell me does it make sense to add Eachine TX-03 with external 1s 150mAh battery (total weight of cam and LiPo is about 11 grams) to Hubsan H107P+ (the one with 520mAh battery)? Flight time without load is about 10 minutes so I think if I remove some grams (shell, wings covers etc) it should give me about 6-7 mins of flight time. And will 150 mah LiPo be enough for this cam? Specs say that current consumption is 300 mah in 25mW mode, so this should give 30 mins of power supply for the camera with 150 mAh LiPo, am I correct? Thanks in advance
@MobyDogOG
3 жыл бұрын
Could you tell me what kind of adapter you used between the camera and battery pls.. Great channel btw..👍
@andyspoo2
6 жыл бұрын
Mine only seems to have 2 power options. Either zero, or 2 bars, which I presume is 50mW. Any body any idea why?
@Tryin2FlyII
6 жыл бұрын
Just wondering what every ones opinion on CMOS or CCD cameras I personally like CCD ( better picture ? Also I would buy this cam but I think the ant will get smashed first thing right off the bat?!!!
@thepaukupnik6987
7 жыл бұрын
How can I see fpv translation from this cam? How to connect display, or this cam have app for IOS?
@NJ-Tech
7 жыл бұрын
that's not bad light handling for a cmos! Nice one Andy, great channel :)
@AndyRCchannel
7 жыл бұрын
Thanks yes I agree
@richard8241
6 жыл бұрын
Which battery fits this ? Also could I wire it up to any 5v ? Thanks.
@abdulazis-bz1yp
6 жыл бұрын
Hey bro I have a problem with my tx 03 Not detected from my ev100
@dazzlekernow1408
7 жыл бұрын
Nice bit of kit! The way things are progressing next year should see improvements in picture quality too. Have you tried taking a 5.8 dipole apart and using that instead of the clover leaf. A lot more durable and lighter. Happy Christmas Pal.
@AndyRCchannel
7 жыл бұрын
+Dazzle Kernow happy Christmas yes I think dipole is the way to go with these
@MTY68
7 жыл бұрын
i dear i just got my frist fpv goggles vrd2 , and i have also ordered tx 03 camera and waiting when it will arrive , pls guide me few things , with one cell how long this camera work ??? if i use 200mw then how long battery work and if use 25 or 50 mw then how long battery work ?? with 200 mw , what range did you get ??? did you check and what range with 25 or 50 mw ?? how to use camera . pls guide me, may i turn on camera first and set band and frequency ??? and then turn on goggles ? for example if i set band 4 and frequency, for first time , then no need to set the producer again and again ?? only time sitting . hop you guide me with thanks
@devingable8467
3 жыл бұрын
Could I waterproof this with Corrosion X? Also, where did you get the connectors from?
@skipward9462
5 жыл бұрын
Does this need the whip to plug into battery? or ready to go?
@Nuffflove
7 жыл бұрын
Happy X Mas Andy
@AndyRCchannel
7 жыл бұрын
happy cmas :)
@dannyc50
5 жыл бұрын
hi, can you instroduce me what kind of battery you use for this TX02? what mah if I need to sustain 30mins of operation? thanks
@khangduongtuanan616
5 жыл бұрын
hi! I want to mod my H36 but I don't know which AIO fpv camera to choose, tx 02 or tx 03? Please help me!! P/s: forgive me if my english is too bad! ;)
@JoshKetchum
7 жыл бұрын
Another great video, thanks Andy. Just ordered this cam for my qx90c custom rebuild and plan to use it at 50mw to get some additional distance. How would you say this camera image compares to the stock cam/vtx on the QX90C? Thanks for any info! Keep up the great work!
@AndyRCchannel
7 жыл бұрын
they are very close really dont really need the extra power on the small brushed as it reduces the flight time a little but if u want the range it will do it
@JoshKetchum
7 жыл бұрын
Appreciate the information, I am building a 105 size setup out of the qx90c, with 53500kv black motors (8520), just need a bit more range due to the speeds I want to fly, this is in open fields similar to your test area. Thanks again!
@gavintaylor737
7 жыл бұрын
Andy I have a few quads from when I first started like the hubsan x4 which I want to play around with and put a camera on. Are these great for putting on any smallish quads cheers
@AndyRCchannel
7 жыл бұрын
yes perfect for those cheers
@fallen0ver
7 жыл бұрын
would be good if it also received as well, say the signal strength and auto ups the power as you get further away...
@johncgibson4720
7 жыл бұрын
I ordered this 10 days ago from CN warehouse. Still waiting it to arrive in east coast US. I want to put it on the wltoys v977 heli.
@AndyRCchannel
7 жыл бұрын
10 days is pretty normal iv waited up to 4 weeks from china
@MrPolymers
7 жыл бұрын
You are absolutely correct about the antenna Andy. Saturday, was flying my QX 95 indoors with my RC club. I was suspicious of one motor as it just was not responding right. Flying around I smacked a wall due to a motor failure. Tore the antenna off the Eachine TX03. It was just ripped out and I had actually used epoxy towards the bottom of the antenna to reinforce it. Too messed up to fix and I pitched it. Banggood has these for $18.99 at their Chinese warehouse. I think a very good camera except for the antenna.
@AndyRCchannel
7 жыл бұрын
the antenna is like that as its best for reception but not good for crashes :(
@MrPolymers
7 жыл бұрын
Ha, well, I dug the camera out of the trash and ordered some antennas. I think fixable. I placed the original 25 mw antenna back on.
@LinusForss
7 жыл бұрын
Feel any difference with the motor mounts under the arms? Thought since it seems like the jello you had in the camera on the crook earlier is gone now.
@AndyRCchannel
7 жыл бұрын
the jello is gone because its a duller day. bright sunlight causes the rolling shutter issue. personally i prefer the mounts on the top
@prarabhshrivastava4572
6 жыл бұрын
Sir is this receiver ROTG01 range good ND I am planning to buy Eachine TX03 . Will these both ROTG01 and TX03 provide me good 300-400m range with good clarity . I am buying it for bugs 2c drone ....plz suggest
@OJtheOZ
6 жыл бұрын
Seriously can I use this module on JJRC H36?
@billsomrak
7 жыл бұрын
Nicely done ... amazing technology. Agree on a replaceable antenna ... perhaps an RP-SMA-Female jack sticking up between the 2 PCBs, with lots of glue around it to protect the PCB connections (or use some kind of break-away mount on the quad). Cheers.
@AndyRCchannel
7 жыл бұрын
yep agreed thanks Bill
@ruftime
7 жыл бұрын
Bill I think it's time someone designs a break-away antenna connection, perhaps a short 2pc adapter initially!
@TheXanUser
7 жыл бұрын
@ Canyon Racer; youd need to have it auto power off too, or risk frying TX. Personally I rather replace a smashed antenna than the whole VTX cause i couldn't retrieve my crashed quad in time.
@ruftime
7 жыл бұрын
Your so right, forgot about that "small" detail!
@billsomrak
7 жыл бұрын
I ordered 2 of them to play around with. Be a couple weeks before I get them. Wish they'd had the mounting plates for them available, but they weren't in stock, so will have to fudge something together. Cheers
@autome4374
5 жыл бұрын
Black wire is + red wire Gnd ,my caméra is off am I wrong in wiring
@cio-_mhai6699
5 жыл бұрын
can i use it on my andriod phone using EACHINE ROTG.??.?,
@davidc5808
7 жыл бұрын
+AndyRC nice video! is there a way i can hook up an osd to this aio camera?
@crooveck
4 жыл бұрын
No, but look at this: kzitem.info/news/bejne/yLB8zmxnkmllgmU
@angelfpv4825
6 жыл бұрын
Will this work with E011?
@stridermt2k
7 жыл бұрын
Scratch that "may have to". -ordered a couple from your link. Banggood is throwing around coupon codes right now too. I must have one on my Crook 110, and perhaps on my Speck 80 as well, though as you know these things migrate as necessary! :D
@AndyRCchannel
7 жыл бұрын
haha same here Michael. they sent me one then ordered three for my other quads haha
@elpresidente5420
7 жыл бұрын
Hey! Can anyone tell me where i can buy this adapter from the TX03 to the 1S Lipo? I cant find it... :(
@MobyDogOG
3 жыл бұрын
Did u find the adapter needed?
@AntonioCarlos-mt9ze
7 жыл бұрын
What is the battery voltage?
@JustForFunRC
7 жыл бұрын
Do you know how much range you get using this camera with the furibee vr 01 goggles?
@AndyRCchannel
7 жыл бұрын
same as any other video receiver
@kleinerseife7818
4 жыл бұрын
Work it with a microphone?
@dilshanperera01
7 жыл бұрын
hey andyrc...love ur videos..i bought a tx02 and i have a f450 with apm.so how could i use tx02 with it..im using a 3s lipo...thanks
@NotGyra
6 жыл бұрын
Just carry one more 500mah battery
@Coreycry
7 жыл бұрын
I pardonned the pun. I have this camera on a H8 mini and the 25mW allows good flight time. It performs incredibly well in low-light evironment, I use it as "night vision goggles" when walking/searching in dark areas.
@AndyRCchannel
7 жыл бұрын
great yes its amazing what these can do
@MickMod
7 жыл бұрын
Can you make a video about the Eachine DVR03? It seems interesting, but im not buying until someone i trust verifies that its good
@AndyRCchannel
7 жыл бұрын
yes i have it coming up thanks
@noelrojas-bq7el
10 ай бұрын
does it have adio?
@Tryin2FlyII
6 жыл бұрын
Andy I really enjoy your channel and watch a lot of your videos and take your reviews to be top notch, honest and relay on them for my purchases. I mean NO DISRESPECT & do not want to come across as a ASS so I don't know if it was just me or what but your commentary during the video was very robotic like very mono tone and to be honest a bit annoying (sorry) I almost could not finish it it just was not flowing like most of your videos until the end when you seemed more relaxed it sound much better again I do not mean any disrespect or trying to be mean just something you might want to take note of -Thanks for all the hard work and time you put into making & posting this useful videos two thumbs up!
@seansolorc
7 жыл бұрын
Andy, I bought two of these cameras and for some odd reason I get lines through my video when I throttle up. when props are not moving, the quality is great. Any idea what is causing this. I put them on different quads and I get the same result. Thanks for the videos!
@AndyRCchannel
7 жыл бұрын
what quad are u flying it with? could be that the fc is drawing too much from the cam to power it fully. have u tried turning down to 25mw and see if the issue goes away?
@seansolorc
7 жыл бұрын
I replaced the camera on my QX90c that had the tadpoles issue. The camera went straight out of the box, and on to the quad.
@seansolorc
7 жыл бұрын
Sorry Andy, it's the TX02 so I cannot change to 25mw. it's happening on both TX02 cameras that I bought and it seems unlikely that BOTH would be defective. I mounted them to tiny whoop, qx95, qx90 and qx90c and it happens to each. the TX01 25mw works perfectly. any help from anybody would be grea!
@hughhemington9559
7 жыл бұрын
I know the "docs" claim the current changes with power level, but has anyone checked this? All the reviews say this camera gets pretty hot, so it could be this thing is just dissipating the extra power.
@speedeespeedboi9527
Жыл бұрын
Lossy adaptor?
@centralfloridalawncare8373
7 жыл бұрын
Andy will this camera work with the eachine goggles two??
@AndyRCchannel
7 жыл бұрын
yes it will cheers
@centralfloridalawncare8373
7 жыл бұрын
I've tried everything and can't seem to get it to work. It seems like it's on the wrong Channel wondering if there is an issue with the fpv goggles
@TheStripcell
7 жыл бұрын
what poer output for a tiny whoop furibee f36?
@AndyRCchannel
7 жыл бұрын
25mw for a whoop
@anujchandkapoor
7 жыл бұрын
How Hot will it get with 200mw rating? Merry Christmas Andy.
@AndyRCchannel
7 жыл бұрын
+Anuj Kapoor well hold it for too long and it will burn you for sure
@hughhemington9559
7 жыл бұрын
What is a compatible RECEIVER for this? One that also has 72 channels?
@fddon4166
7 жыл бұрын
if the receiver can receive only one channel in the same frequency as the transmitter can transmit, then they are compatible. in practice, any receiver will be compatible.
@christopheb6967
6 жыл бұрын
FDΩ Don , Hi friend, hi Andy , do you think this camera 🎥 can works with my H107D video transmitter? Thank you.
@shahedahmed2794
4 жыл бұрын
Can I add microphone on it and get audio from it ...
@sammiahmed1319
4 жыл бұрын
Shahed Ahmed anyone please help
@johncgibson4720
7 жыл бұрын
Did you call it a "lousy" adaptor at 3:55 ? I hope not, hehe.
@AndyRCchannel
7 жыл бұрын
micro losi
@ericbennett4183
7 жыл бұрын
Can this be powered from a RX also??
@holetoanotheruniverse4690
7 жыл бұрын
Eric Bennett Yes. You can use the 5v from the ESC.
@jakejocson5492
5 жыл бұрын
Hi sir what is the maximum range of the cam?
@trevorowens1088
5 жыл бұрын
It depends on the receiver but with my vr007 I am able to get about 300-400 meters
@NotGyra
7 жыл бұрын
Hello bro, what does mw affects?? Range??
@miko8732
5 жыл бұрын
Yes, range and power consumption
@nickr1254
7 жыл бұрын
Happy Chistmas!
@AndyRCchannel
7 жыл бұрын
merry xmas to you!
@HoHAGGIS
7 жыл бұрын
Happy Crimbo Andy,,, Looks like a slight fish eye affect from the camera lens or is that just me !!!
@mohemahmoude3356
5 жыл бұрын
it pulls almost 0.9amp i s that normal
@Kordanized
7 жыл бұрын
is this 1080p???
@AndyRCchannel
7 жыл бұрын
no its standard def
@honkhonk8009
7 жыл бұрын
no its obviously 108432k
@OMGEdwardCullen1
7 жыл бұрын
I have this same camera yet I only have power modes 0 and two lines,,,,weird
@AndyRCchannel
7 жыл бұрын
maybe one of the leds is faulty do you get two presses of 2 lines? if so its likely in the second press the third led should light up
@johnsheehy6172
5 жыл бұрын
It should be mentioned that the red wire is Negative and the black wire is Positive. Check it out on the above purchase link before you connect up.
@johnsheehy6172
5 жыл бұрын
Ignore the purchase link, I got one and red is positive.
@rcpilotcambodia2991
7 жыл бұрын
thank that helpfull tho
@bastiaanjansen4867
7 жыл бұрын
Hey, is your camera getting hot?
@holetoanotheruniverse4690
7 жыл бұрын
Bastiaan Jansen there: 5:36
@wagon7052
5 жыл бұрын
every camera gets hot after long usage i have a tiny whoop and its camera is getting hot
@juhopulkkanen
7 жыл бұрын
first! i dont like those cheap aio cameras so i made my own 5 gram aio fpv with the cheap 170 degree camera and small 25mw tx from banggood so now i can buy spare parts for it and it only cost 17€
@AndyRCchannel
7 жыл бұрын
nice! yes I have done that in the past also.
@wottwink1693
7 жыл бұрын
Как она вообще стоит своих денег???
@MrPINKFL0YD
5 жыл бұрын
As NHTC IS CRAP CPMPARED TO PAL IT MATTERS
@querocafeee3716
6 жыл бұрын
Porra man tu fala de mais nam , fala menos e faz mais
Пікірлер: 136