This uses the same channel and power setup that the Eachine Tx526 uses. Once you get used to it they work great. Can switch it off for pit mode after a race.
@RagTheNutsOff
7 жыл бұрын
Howdy Sick, yea I did like the idea of it showing 0 on the screen so that you knew it was in off mode. Very handy indeed! Matt
@austinowen4924
7 жыл бұрын
Look what I just found. It's for 22.99 USD www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?p=B4200913385416201708 Gearbest is a well known online store, so... kzitem.info/news/bejne/2ZpvyGucmpt3aIY
@toddspeck9415
6 жыл бұрын
I am so stoked I got one of these! Silicone rubber bands work awesome to hold it down. 50mw is the best...200mw blows my mind...U can fly anywhere...linked to my XK monitor no lag in latency...Now it needs a mullet mod...p.s. 5 min gorrilla glue will keep your nuts on.
@RagTheNutsOff
6 жыл бұрын
Howdy Todd, I know! I used a EF01 the other day it was utter kak. Swapping to the spare TX03 I have instead, Matt
@raminatorrammer
7 жыл бұрын
Excellent, thorough review. Good job pointing out the possible wiring issues with these. I wish I had paid attention before plugging mine in & seeing smoke come out of it. Turns out the adapter cable came out of the box with the red & black wires reversed. I'm finding out now that this is a very common problem.
@RagTheNutsOff
7 жыл бұрын
"Oh balls" I feel is the appropriate response to that. Sorry to hear that!
@Phrancis5
7 жыл бұрын
I had the non-switchable 200mw version of this and I loved the range, clarity, and light handling, but the antenna mast was so easy to bend/weaken and one light crash broke off the lens assembly and shorted out something. I've had several micro AIO, but this is the only one to die on me...
@RagTheNutsOff
7 жыл бұрын
Howdy fella, I'm sorry to hear that. I know with my one of my micro quad, it's take an absolute beating and only has one lobe left on it, still flyable :D Matt
@Phrancis5
7 жыл бұрын
I did like it a lot before it died, so I went ahead and ordered the TX-02 with switchable power for a micro build that has more camera protection in the frame.
@mattcole2816
3 жыл бұрын
I have a hubsan H501SS and the fpv range is crap so im thinking of getting an all in one fpv camera to strap on the quad and use my black pearl fly sight fpv monitor that sits ontop of my H906A TX and the quads built in camera will still be used for video recording and the all in one fpv unit will be purely used for long range fpv and intend to run it at 200mw
@rumbey1
7 жыл бұрын
Just purchased one via your Link Matt. My first aio so it should be great to move from model to model
@RagTheNutsOff
7 жыл бұрын
Howdy Rumbey, thank you, I appreciate it. Matt
@rumbey1
7 жыл бұрын
Matthew Ogborne just need to get a suitable mount
@flhoest
7 жыл бұрын
Once you figured out what is the best match between transmitter and receiver band/channel, this is amazing ! :D
@SkydiveDriver
7 жыл бұрын
Thank you for the review. I just got my TX03, your review has been very helpful. I have to ask a indirect question though. How did you get the iPad to receive the TX03 picture. Thanks again,
@RagTheNutsOff
7 жыл бұрын
Howdy fella, yea the TX03 is a good one. As far as I know you can't make an iPad show the FPV picture, the screen shown in the video was a set of Eachine VR007 goggles, hope that helps! Matt
@kanbanpad
7 жыл бұрын
Thanks for this video. I was having trouble figuring out how to turn transmit on.
@FlyingFun.
7 жыл бұрын
your looks like it's in focus, mine arrived and it's focused 5cm in front of camera, everything else is a blurry mess and makes me crash , so much hard glue on the thread that i cant refocus it...any tips on how to remove the glue so i can set the focus?
@LA6UOA
7 жыл бұрын
Great review! I bought 2 of them yesterday! Thanks! :-)
@RagTheNutsOff
7 жыл бұрын
Morning! Thank you. Andrew popped around yesterday to collect it for John, he's going to have fun with it, thats for sure. Matt
@jamble7k
7 жыл бұрын
nice one matt, i have one of the original eachine ef-01 25mw 3-5v ones... wasn't too impressed with the range or cam quality(black ground anyone?) this looks much better!
@RagTheNutsOff
7 жыл бұрын
Howdy Jamble, I've got a EF-01 here, but not got around to using it yet (it's in a micro quad kit). The TX02 was good, this one has less fisheye than the TX02. And nowhere near as crap as that Eachine MC02 camera I had, that thing was dangerous! Matt
@jamble7k
7 жыл бұрын
I had my ef-01 on my first fpv bonsai... whenever I banked I'd lose signal!! it was scary :D
@RagTheNutsOff
7 жыл бұрын
+jamble7k Yikes! That is scary
@maxr.6456
3 жыл бұрын
thank you for review dude
@rcjoseb
7 жыл бұрын
Just saw this combo on banggood and am glad I found your review. Thanks for in the depth info. When you take video with your iPad how are you transferring to your desktop pc? Are you using iTunes or another software? I have never thought of using the iPad on my channel for videos.
@robertbrander2074
5 жыл бұрын
Eachine VTX02 works ....... but it's REALLY HOT !! You can't even hold it when pressing the button to set the channel .......... any hints ?
@fpvlive
7 жыл бұрын
Hello Matthew, thanks a lot for this review, just one question; You mentioned in the video your prefer a PAL cam over an NTC. What's the reason for that ? I also noticed banggood has a PAL variant of the TX03. I'm just wondering will it be the same quality as the NTC variant ? But the strange thing is; The TX03 NTC has over the 300 reviews, the TX03 PAL has 0 reviews. What do you think ?
@ericbennett4183
7 жыл бұрын
I'm planning on using this on a plane. Can this be powered off a AUX channel on my RX
@RagTheNutsOff
7 жыл бұрын
Howdy Eric, "possibly". And thats the right answer as a tiny little ESC won't have a high enough current rating on it to power it and the servos and the receiver without knowing what model you'll be using. Personally I'd suggest using a dedicated 1S battery or a separate BEC just for this camera. Hope that helps Eric, Matt
@RickyX64
7 жыл бұрын
I received mine in the mail today!! Good video BTW, I'm going to subscribe! Anyway, since you have experience with these tiny AIO FPV systems, is the heat they produce something I should be worried about? Like, is it safe to run them on the bench for testing? I would imagine that they run much cooler soaring in the air than if they were just sitting on my desk as I test them with my lipo batteries to see how long they last. I also live in California where the heat can sometimes get so bad that my laptop would shut itself off and my desktop would throttle when gaming...
@RagTheNutsOff
7 жыл бұрын
Howdy fella, when they're on a model being flown around it should be fine. It's not like we're wrapping it in foam and leaving it to cook inside a model. Hope that helps! Matt
@Rallefarrr
2 жыл бұрын
Is there is a link to the battery you used cause Bangood is banned in my land?
@dannyc50
5 жыл бұрын
can tx03 work with Eachine ROGT02 ? I would like to view the FPV from my Mobile phone, so I will use ROGT02 as receiver, but don't know can TX03 work with ROGT02 ?
@RagTheNutsOff
5 жыл бұрын
Hey Danny, no idea on that device. However check the bands, I would be extremely surprised if they are not using standard ones. Matt
@ErnestGWilsonII
7 жыл бұрын
Which 1S Lipo battery and adapter cable are you using to power this? Can you please supply links to items that already have the correct connectors such that no soldering is needed on my end? If I need adapter cables, can you please supply links as well?
@WinstonSmith1984
7 жыл бұрын
There's an even smaller camera+VTX combination called "Super Mini Light AIO 5.8G 48CH 25mW VTX 520TVL 1/4 Cmos FPV Camera PAL/NTSC for QX90 QX95" that's looks good for ultra-micro aircraft: www.banggood.com/Super-Mini-Light-AIO-5_8G-48CH-200mW-VTX-520TVL-14-Cmos-FPV-Camera-PALNTSC-for-QX90-QX95-p-1095683.html The lens and image quality looks similar. I don't like the distortion though that these small cameras all seem to have: they magnify objects towards the edge of the image and shrink them towards the center.
@RagTheNutsOff
7 жыл бұрын
+turdsurfer Howdy fella, I'm not sure on that one as I've not used it. The main attraction for the tx03 is the ability to switch the power output, so multiple uses. That one doesn't have this ability. And yea this one is not as distorted as the tx02, which they all seem to suffer from :/ Matt
@CesiumSalami
7 жыл бұрын
There's a bunch of ones like this (as in I think they're all the same camera just packages slightly differently). The image quality is ok ... it's better suited for indoor stuff, I think. It doesn't manage extreme lighting as well as others (TX02 and no where near FX798t). But - for something like a Tiny Whoop - it's perfect. Especially when you buy this one: www.banggood.com/Eachine-Fatbee-FB90-Micro-Racing-Quadcopter-Spare-Parts-5_8g-25MW-48CH-VTX-520TVL-CMOS-14-Camera-p-1108072.html or this one: www.tmart.com/Boldclash-F-01-5-8GHz-TX-Camera-AIO-Combo-3-1g-AV-TX-48CH-Power-Supply-2-9V-5-5V_p352293.html The version above (for the Fatbee) has some extra soldering points to allow for the weird orientation of the antenna. Reception is great even with the weird antenna (I'm using a non-diversity setup with just a patch antenna).
@MobyDogOG
4 жыл бұрын
What battery cable adapter did u use between the camera and the 1 cell pls?
@RagTheNutsOff
7 жыл бұрын
@Jason, I removed your comment as that was an affiliate link and blatantly the comparison between the TX02 & TX03 was covered in this episode. The TX02 is reviewed here kzitem.info/news/bejne/mWdnr45ugH55d6w
@jasonvanderpool1942
7 жыл бұрын
Ok Mathew. I didn't see that. Thanks.
@anzaeria
4 жыл бұрын
Great review. Out of curiosity, how many pins does the camera's battery connector have? I know it's a Molex 1.25 and I also know that they can have a number of different pins. By the way, I'm not sure if Banggood supply the cable adapter anymore. So I might have to look around for a battery which connects directly to the camera.
@chrisdavis3642
Жыл бұрын
Two pin
@airplane344
7 жыл бұрын
Thanks you for review. Can I connect microminimOSD to TX03? I cannot find any datasheet for it. :(
@scott6504
2 жыл бұрын
What kind of battery are you using for the camera?
@kkarma7467
7 жыл бұрын
hi i cant seem to get my tx03 working with my fatsharks ive been through every band and channel i have first gen nextwave module in my googles should be in band f but i have no image any ideas mate
@fa300ry
6 жыл бұрын
Any recommendations on how to install the camera safely on the plane ?
@robertbrander2074
5 жыл бұрын
Question : I just bought a Syma x11c mini quad which has a pretty good 720p camera . The camera records to the quad , but it has no FPV . Can you split the wires from the stock camera and add a VTX without harming the original camera operation , and therefore get FPV with minimal weight added ? Because if that works , all your old camera drones , can be made into FPV drones just by splitting wires . I look forward to hearing your opinion . Thanks !
@RagTheNutsOff
5 жыл бұрын
Howdy Robert, I have no idea. However it would be easy to test and you'd be very, very unlikely to damage anything, it'll be the yellow wire from the camera unit. Matt
@robertbrander2074
5 жыл бұрын
@@RagTheNutsOff Thanks for the response ! My Drones arrive tomorrow , so I'll give it a shot . Maybe I'll get lucky and have 720p fpv ..... Whoop-woo ! :-D
@carolinacabrera747
4 жыл бұрын
@@robertbrander2074 hello, sorry if I'm a bit late, did your project work? Cause I have the same drone and it would be interesting..
@robertbrander2074
4 жыл бұрын
@@carolinacabrera747 I made a short attempt , and had no luck . But I'm not an electrician so I can't explain why it didn't work or even if I had my wires right . I should try again .... it seemed a good idea ..... :-)
@perfeet702
7 жыл бұрын
Hi Matthew. Great review. Do you have a recommended battery (sold on Banggood) for TX03 so you can use the supplied connectors?
@RagTheNutsOff
7 жыл бұрын
Howdy fella, the connector is a LOSI connector. You'll find this on most 1S batteries and it looks like this one truerc.com/images/LOSB0860.jpg so look for a 1S battery with that connector :) Matt
@partsbenttoys
7 жыл бұрын
thank you Matthew, i was so close to purchasing the mc02 until i saw your review which led me to this review. still not satisfied with the tx02 though, i have been looking for a light weight all-in-one vtx that can handle 5v-16v. cost is always a consideration but i am willing to spend the extra to get the best view possible. have you reviewed such a system ? i appreciate the honest reviews and i have subscribed, thanks again. cheers
@RagTheNutsOff
7 жыл бұрын
Howdy Roland, ah it's unlikely for you to find a AIO camera that can take such a large input voltage range, instead a simple BEC for £2 would do that for you. They're super light and super cheap. See here for one such example: goo.gl/IFX64P I use these in several of my models and they work great, even up to 5S! Hope that helps! Matt
@stefanbachrodt7072
7 жыл бұрын
John, you are indeed a lucky man!! =D
@333ingee
7 жыл бұрын
Hi Matthew, thanks for doing this review I live in the UK, NOW THEY GIVE YOU THE OPTION TO CHOOSE PAL OR NTSC which one should I get? , this is my 1st time venturing into fpv I will be using the Furibee f36 little quad and the eachine VRD2 head unit, which I think that's all I need to get flying fpv, what do you think of that setup?cheers Nige.
@RagTheNutsOff
7 жыл бұрын
+333ingee Howdy Nige, I've not used those goggles but I'm sure they'll be fine. Generally speaking PAL is better. However the one used in this video was the NTSC one. Hope that helps Nige, Matt
@headfog7621
7 жыл бұрын
great review, but I think maybe you might of gotten a bad MC02, I got two of them but really only fly them around the house and thought it handles indoor low lighting great. The few times I flew out side I don't remember any problems,(maybe I wasn't looking for any...lol) BTW I use them on my brushed micro quadcopters.
@RagTheNutsOff
7 жыл бұрын
+Chi Sty Howdy Chi, I must have had two duffers then, as my original one stopped working, banggood sent me a replacement and it had exactly the same issue. Have a look back to see the review, one lap and I landed as it was too dangerous to continue. Indoors it's fine! Matt
@headfog7621
7 жыл бұрын
Matthew Ogborne wait I just checked my camera I don't have the mc02 I have the tx02...sorry bout that..
@headfog7621
7 жыл бұрын
Matthew Ogborne when you set the camera to run at 25mw does it heat up as much or less then on 200mw?
@RagTheNutsOff
7 жыл бұрын
+Chi Sty Ah how I missed that, no it doesn't! I'll update the description. Thanks for reminding me! Matt
@RagTheNutsOff
7 жыл бұрын
+Chi Sty lol that'll be why you're not having an issue then :) The MC02 was horrific. Matt
@noelrojas-bq7el
Жыл бұрын
can I connect it to any receivers?
@shckltnebay
7 жыл бұрын
Can you flip the video? If I used a 180mah 1S how much time would I get?
@RagTheNutsOff
7 жыл бұрын
Howdy Eric, that question came up in the comments, so I'll add this in the video description too. As far as I can tell the image cannot be flipped, the same as the TX02. As far as battery life, that 100% depends on the power setting being used. I've put the power consumption ranges in the video description. Also if I was to guess at that, 180mAh wouldn't be that long on the full 200mW at all, but much longer on the 25mW setting. Hope that helps you Eric! Matt
@RickyX64
7 жыл бұрын
Matthew Ogborne I hooked up my TX03 to a 250mah lipo that I bought and haven't used in exactly two years, and I turned it off after 24 minutes because that was double the flight time of my longest flying quad. I had it on band A, channel 1, at 200mW with the three hyphens. I didn't really feel a difference in heat throughout. That little thing runs hot from the get go, and it doesn't matter if it's at 25mW, 50mW, or 200mW.
@RickyX64
7 жыл бұрын
Matthew Ogborne I hooked up my TX03 to a 250mah lipo that I bought and haven't used in exactly two years, and I turned it off after 24 minutes because that was double the flight time of my longest flying quad. I had it on band A, channel 1, at 200mW with the three hyphens. I didn't really feel a difference in heat throughout. That little thing runs hot from the get go, and it doesn't matter if it's at 25mW, 50mW, or 200mW.
@goldie9864
5 жыл бұрын
@@RickyX64 have you played around with different band/channel combinations? I've heard the lowest frequency works best for range / penetration.
@dikshantbohra7220
4 жыл бұрын
Can you please suggest me aio fpv camera with 2 km range
@RagTheNutsOff
4 жыл бұрын
Any will do, just get a better recieving antenna as a tiny one could be seen from the moon if the recieving antenna was big enough
@dame5014
4 жыл бұрын
@@RagTheNutsOff I see some VTX setups that are all in one, and some that aren't. What's the pros and cons with getting an all in one setup vs the other?
@fuupdaass275
3 жыл бұрын
@@dame5014 smaller light weight but they seem to get very hot
@pacattack7121
6 жыл бұрын
Nice. Does it matter what letter its set at? Im not sure i understand what the letters mean.
@RagTheNutsOff
6 жыл бұрын
Howdy vassilis, the letters are bands and yes they do matter! (also go careful as many of the band channels overlap with each other too) Hope that helps, Mattt
@pacattack7121
6 жыл бұрын
RagTheNutsOff Thanks mate. What settings must i use if im on a pc?
@hughhemington9559
7 жыл бұрын
Does the camera draw less current at different "power" settings? Or does it just dissipate the power more or less with the SAME current draw? I've read that it gets really hot on 25mw mode which is suspicious. Getting longer micro flight times would be worth using only 25mw.
@RagTheNutsOff
7 жыл бұрын
Howdy Hugh, yes absolutely, it would draw more current at how output transmission powers. I'm not sure on the exact current draw as I flew mine into a fence last weekend and I'm waiting for a new one to arrive. As for better power consumption, yes 25mW would draw less current, thus a longer battery life. Hope that helps Hugh, Matt
@kronosdarkangel5290
4 жыл бұрын
How about the range?
@bornaradusin9723
6 жыл бұрын
Would the cam survive if connected to 5.9V as i would you it on my rc truck and the channel free has 5.9v outpout, i would take BEC but not sure if it would help out with downsteping such slight difference
@RagTheNutsOff
6 жыл бұрын
Howdy, I have no idea. You'll need to see if that voltage is in the allowed range for the camera. If it's not, then I'd not risk it and user a booster or regulator to get the voltage up/down as required. Matt
@bornaradusin9723
6 жыл бұрын
RagTheNutsOff thank you, i'll take the bec as well then just in case. :)
@mohemahmoude3356
5 жыл бұрын
thank you sir ,can i use all the TX02-3-5 camera with eachine vr800 if so how can i decide if this camera suitable or ather cameras (sure without extra tool"transmitter") and how can i know the range of the camera i mean how far i can fly with my airplane
@RagTheNutsOff
5 жыл бұрын
Howdy, I ave no idea on the VR800, you'll need to check the bands. As for the range, that is subjective, we can see the other side of the galaxy, so it depends on the antennas you're using. Matt
@mohemahmoude3356
5 жыл бұрын
@@RagTheNutsOff sory it's eachine EV800
@christopherjacques6027
6 жыл бұрын
Is the performance of the camera affected by the amount of heat it produces? I have bought one and have not used it yet just because it does get hot and I was worried.
@RagTheNutsOff
6 жыл бұрын
Howdy Chris, it's a tiny camera pumping out 200mW, it's bound to get hot. Matt
@GroovyVideo2
7 жыл бұрын
my tx03 on 25mw range is about 12 feet -using 5802D with stock antennas as monitor 50mw range is farther but not a lot - what could be problem ? it does get very hot 172F @25mw and 212f @ 50mw pretty sure 200mw could toast it
@RagTheNutsOff
7 жыл бұрын
Howdy fella, sounds faulty if the goggles work OK with other video transmitters, Matt
@GroovyVideo2
7 жыл бұрын
Thanks
@kartherton
7 жыл бұрын
Hi Matt. I like the way you done your camera, battery pod. Running 200mw, how long are you finding the 1s battery lasts please? Thanks. K.
@RagTheNutsOff
7 жыл бұрын
Howdy Keith, it'#s a little power muncher the same as the TX02 so it won't last long on a 2S battery at all when in 200mW mode. That camera also has a new home as I bought it in a special deal & John came asking if he could have it post the review. John should be a happy lad with it, it did really well! Matt
@OJtheOZ
6 жыл бұрын
Can I use this tx03 on JJRC H36
@paulbizard3493
6 жыл бұрын
Hi Matt, have bought one of these, but what's the name of the connector on the battery side? I'm just a shameful noob. Thanks.
@RagTheNutsOff
6 жыл бұрын
Howdy Paul, I'm not sure either! Matt
@paulbizard3493
6 жыл бұрын
I found out! Here is an extract of maxway.net/battery-connectors/ " Different names are used for these connectors, including: Micro Losi, JST-DS, Micro-T, and Molex. They are, in fact, Molex connectors, or compatible copies. Molex describes them as 2-way 1-row MicroBlade™ Wire-to-wire Receptacle Housings. The part numbers are 51005-0200 for the female housing, which is the piece without the visible pins, and 51006-0200 for the male housing with the exposed pins. Many users and sellers get this terminology backward, since the female connector slides inside of the male connector. " Thanks anyways. I have also bought a Paris Sirius Air3 flight controller from Carbonbird.com. All this stuff will go into a Piper J3 EP from Worldmodels.
@MTY68
7 жыл бұрын
i dear i just got my frist fpv goggles vrd2 , and i have also ordered tx 03 camera and waiting when it will arrive , pls guide me few things , with one cell how long this camera work ??? if i use 200mw then how long battery work and if use 25 or 50 mw then how long battery work ?? with 200 mw , what range did you get ??? did you check and what range with 25 or 50 mw ?? how to use camera . pls guide me, may i turn on camera first and set band and frequency ??? and then turn on goggles ? for example if i set band 4 and frequency, for first time , then no need to set the producer again and again ?? only time sitting . hop you guide me with thanks
@RagTheNutsOff
7 жыл бұрын
Howdy fella, the short answer is the higher the power setting the less flight time you'll get with the battery. Also frankly speaking set it to 200mW and you'll be fine for most situations (if flying indoors, 25mW is way better). Set a channel, I'd suggest the F band and then use the search or buttons on the goggles to find the channel. Hope that helps, Matt
@JJONESFPV
7 жыл бұрын
What goggles do you use??
@RagTheNutsOff
7 жыл бұрын
Morning J, FatShark Dominators V3's and a pair of Eachine VR007's I bought for peanuts in a sale on BG. Hope that helps J, Matt
@davidbob892
6 жыл бұрын
Whats the range of this camera? How much distance can this camera work?
@RagTheNutsOff
6 жыл бұрын
Howdy David, that is a subjective question, as it could be the moon if you had a big enough antenna to receive footage. As for "normal" use, should be fine for flying normally, also in & out of some sparse trees too. But then again it really does depend on what you're using as googles & antennas as the antennas have the biggest impact when combined with the transmission power, Matt (If still unsure, ask int he FB group David),
@davidbob892
6 жыл бұрын
Will I be able to get 500 m with this fpv monitor www.ebay.com.au/itm/T-RS2000-7-FPV-Monitor-5-8GHz-32CH-800-x-480-Snowflakes-Screen-for-DJI-QAV250/253836017512
@RagTheNutsOff
6 жыл бұрын
Howdy David, no idea, I've never used it. Also I've never used a monitor either, I;d not suggest them. The best place to ask for help is in the FB group, Over 2,800 other pilots in there, Matt
@kennethholland1502
6 жыл бұрын
Love people that throw the instruction away as useless, then look like a fool when they don't know how to use the item.
Пікірлер: 117