My brother took his five times to a mechanic in Blanding UT and it was a piece of crap. My 13 year old nephew tells his dad he wants to be a mechanic. So my brother says he can try with the side by side. He watched you, fixed the side by side and they had a day of fun with the side by side actually working!
@thehonestmechanic
Жыл бұрын
I'm happy I was able to help(sort of lol) these comments make me very happy and it's why I make videos! 🙏
@dustyschiewe5522
Ай бұрын
Blue tooth
@michaelrussell9293
11 ай бұрын
Best, easiest, affordable, effective solution of my year. Thanks for sharing.
@paulanderson388
Жыл бұрын
Great idea...Thank You. I try to remember to start it once a week to keep the float bowl full. I have a 2007 Rhino 450 (Love it) and I found that using an Iridium spark plug also helps it fire up quickly.
@mikesdirt159
Ай бұрын
The primer bulb will also help with vapor lock in hot weather
@billwolsleger4162
Жыл бұрын
Great idea, wish I had seen this easy fix before installing my electric fuel pump system and switches. Thanks.
@InTheDirtAgain
Жыл бұрын
Those primer bulbs have a 1-way valve in them to act as an anti-drain feature. Swapped an old (original) bulb for new on my 69 Merc 1000 outboard and its a night/day difference in starting. Great idea on any older vacuum pump engines.
@danemmerich6775
3 ай бұрын
OMG….. yes this is exactly what I need!! Mine has had issues all the time and now it will not start because no gas to Carb. I will try this first and then try the electric fuel pump if it does not work. Thank you so much!!!
@kellypendleton6819
Жыл бұрын
I only wish you had cleaned off the engine so we could see everything. Thanks for the tip. I just ordered the inline primer bulb.
@nomadchad8243
2 ай бұрын
Thats a great idea, mine runs great but after a month I need to use spray start to get the fuel to the carb. I tried an electric pump and it started great but It would often overcome the float needle and flood the carb making it a fire hazard.
@Surfcityrealty
Жыл бұрын
Lots of people also change out the fuel pumps to key on electric pumps.. I like your idea too..
@thehonestmechanic
Жыл бұрын
I wanted to keep it simple and reliable. An electric lift pump is possibly better....
@oby-1607
Жыл бұрын
@@thehonestmechanic I really doubt the electric lift pump is better because if an accident occurs and the rhino is upside down or on its side and the fuel line gets a leak, the pump will continue to pump fuel as long as it has power and can make a situation way worse than it can be. Probably why the factory uses a vacuum pump.
@roberttheriault5166
7 ай бұрын
Super good video,
@20_below
2 ай бұрын
i just hold my hand over the air intake on my 2005, works every time
@TexasGuitarTech
9 ай бұрын
Thank you! 🙏
@davewise29
2 ай бұрын
Can you get to that squeeze ball without taking to the drivers seat? Great video
@thehonestmechanic
2 ай бұрын
Yes but it's much easier to remove the passenger seat
@TimberJay
Ай бұрын
Just picked up a 2004 Yamaha Rhino, in very good condition only 700 klm on it. But cold starting sucks. I'm going to do your fix and hope it works. My question is how many times do you have to prime the pump? dont want to flood the carb. and this was a year ago could you do an update on your fix? thanks Rhino On!!!!
@thehonestmechanic
Ай бұрын
That is a great find! I recommend priming the ball until it is firm(kinda like an outboard motor). It should now flood as long as the carburetor is in good shape(the needle, seat and float all work together as they should) Thank you and good luck 👍
@TimberJay
Ай бұрын
@@thehonestmechanic thank you for your quick response thank you for the important information 🙂
@kendavis8138
6 ай бұрын
Thanks, I'll try this.
@tractorguy1967
5 ай бұрын
Hey bud , great video. I too have this problem but will follow your suggestions. I recently replaced the battery and now I have all the lights but it will not turn over. Could there be a fuse gone bad?
@thehonestmechanic
5 ай бұрын
So just starting from the top, I'm assuming that the battery is food and that it's installed properly. After that, there is a breaker for the starting circuit. It's usually located in the battery box . I would check it first. Also, thank you for watching!
@alexchic5074
Жыл бұрын
I bought one of these for my church, the church is a 40 minute drive from my house, so I'm sorry to pesker you with a question but it'll save me a good hours drive. Did you have to buy fuel lines for this mod? If so what's the ID?
@thehonestmechanic
Жыл бұрын
I did have to buy some fuel line and adapters. I used whatever size the current fuel system was which if memory serves it's 3/16 and adapted it to the smallest primer bulb I could find which I think was 1/4. Unless of course you can find a primer bulb that is the correct size and simply splice it in. 😉
@alexchic5074
Жыл бұрын
@@thehonestmechanic that was my original thought process, splicing it in. I've bought 4 different sizes just in case. But as a precautionary, I'll spend a little more for fuel lines too. Thank you for the quick reply and info. Much appreciated, and I've subscribed.
@TimberJay
Ай бұрын
Looking online for the pump forgot to ask the internal diameter of the hose found one on Amazon stating it's an 8 mm internal diameter is that correct? Thanks for your time
@thehonestmechanic
Ай бұрын
@TimberJay I can't remember exactly but I did have to use some reducers to make the connections. I recommend using quality clamps to prevent leaks
@charlietaylor4020
2 ай бұрын
This is mine it Will run the battery down
@richardthomas1743
Жыл бұрын
I bought an electric fuel pump for mine , I just have not installed it yet.
@robertoalvarez8627
3 ай бұрын
👏👏👍
@edgarguzman2071
Жыл бұрын
Where can you get part . Link.,? part #.?
@thehonestmechanic
Жыл бұрын
I purchased this one from my local boat/marine store. Here is a link from Amazon www.amazon.ca/Rubber-Transfer-Vacuum-Gasoline-Accessories/dp/B06X3R9YBN/ref=mp_s_a_1_3?crid=3IKHL4BGU097K&keywords=primer+bulb+boat&qid=1682217766&sprefix=primer+b%2Caps%2C308&sr=8-3
@johnbauer2565
2 ай бұрын
Where did you get your primmer ball?
@thehonestmechanic
2 ай бұрын
I picked up my from my local boat dealer. I thick I added a link in the description box for one on Amazon
@kendavis8138
6 ай бұрын
Did you use 1/4" or 5/16" hose?
@thehonestmechanic
6 ай бұрын
Pretty sure the primer bulb was 5/16 and the regular fuel line was 1/4. I ended up using a reducer to make everything work together
@keithnichols1951
Жыл бұрын
Will this work on a 2009 rhino that is fuel injected?
@thehonestmechanic
Жыл бұрын
This modification is intended for carburated models. Fuel injection already has a higher pressure fuel pump
@WyldeTymes70
Жыл бұрын
Do you bypass the fuel pump all together or are you still going into it ? Thanks
@thehonestmechanic
Жыл бұрын
Still using the fuel pump.
@keagonhuff2493
Жыл бұрын
@@thehonestmechanichat is the size of the hose for the pump
@keagonhuff2493
Жыл бұрын
@@thehonestmechanicwhat
@thehonestmechanic
Жыл бұрын
@keagonhuff2493 I can't remember exactly but I think it is 1/2 inch
@davewise29
Жыл бұрын
Great idea mine is hard to start after sitting How can you get the primer if the passenger seat is in place??
@justinperry2392
Жыл бұрын
Or just get a fuel pump, we got rid of the vacuum pump.
Пікірлер: 49