Great job! Muffler mod is a must on those saws, super restrictive.
@oakeymt.outdoors
11 ай бұрын
Yeah it came to life with that mod. Thanks for watching
@ZH-ls6nb
7 ай бұрын
Whats the porpouse of that mod?
@patanthony9286
5 ай бұрын
I’m glad to see finally someone cutting through almost the full 20 inches
@user-ob7rg3yb8f
8 ай бұрын
So the modification consists of drilling the hole and leaning out the gasoline correct?
@dennyussery1021
4 ай бұрын
What size hole did you drill? Did you modify the deflector any like most of the other youtubers thanks
@oakeymt.outdoors
4 ай бұрын
Yes I did mod the deflector. I just picked a drill bit out that would kinda match where I was drilling. It's worth doing the mod. Just make sure you clean out the muffler good after drill.
@oakiewoodsman
Жыл бұрын
That didnt take very long sir! How do you get all the metal shaving out of the muffler generally?
@oakeymt.outdoors
Жыл бұрын
I blow it out with compressed air and wash it out with brake cleaner
@Doc-Cole_Trickle-of-Chainsaws
11 ай бұрын
👍🆙OW
@oakiewoodsman
Жыл бұрын
I wish you could get the screen and divertor off without pulling the muffler
@bryanharris3377
5 ай бұрын
You can
@carlveilleux5744
8 ай бұрын
Did you need to readjust the carb? Got myself a new CS4920 and thinking about doing the same.
@oakeymt.outdoors
8 ай бұрын
I did only bout a half of a turn
@carlveilleux5744
8 ай бұрын
Towards leaner or richer? In other words, does opening up the muffler a bit like you did tends to lean the mix or enrich it? Thanks! @@oakeymt.outdoors
@oakeymt.outdoors
8 ай бұрын
@carlveilleux5744 I learned it out . The muffler mod is definitely worth doing to these 590's
@carlveilleux5744
8 ай бұрын
Perfect, thank you. I'm not new to chainsaws but never did any mod to them. I appreciate your time, thanks again.@@oakeymt.outdoors
@oakeymt.outdoors
8 ай бұрын
@@carlveilleux5744 just make sure you flush the muffler to get all the little pieces of metal out of it. Thanks for watching
@Doc-Cole_Trickle-of-Chainsaws
11 ай бұрын
👍🆙OM
@user-ob7rg3yb8f
8 ай бұрын
So the modification consists of drilling the hole and leaning out the gasoline correct? 9:03
@oakeymt.outdoors
8 ай бұрын
Yes dill the hole but make sure you flush out the muffler. I was able to lean mine out maybe a half turn. Yours maybe different. I don't know how your carb is set on your.
@user-ob7rg3yb8f
8 ай бұрын
So the modification consists of drilling the hole and leaning out the gasoline correct? 9:03
Пікірлер: 24